Pelco EHXM31CBW23-2, EHXM31CBW23-2X, EHXM31C22-7, EHXM31C22-7X, EHXM30CBW23-2 User Manual

...
0 (0)

O P E R A T I O N / P R O G R A M M I N G

 

ExSiteExplosionproof

 

EHXM Series

®

Fixed Mount System

 

 

C1301M (6/05)

Contents

Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Operate Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Accessing Main Menu (Preset 95). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

CM6700/CM6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

KBD200A/KBD300A (Direct Mode Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

CM9500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

CM9700 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

KBD4000/KBD4002. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

MPT9500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

NET300/NET350/NET4001A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Quick Start Guide – System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Display Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Label Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Unit Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Type of Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Auto Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Zoom Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Zoom Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Low Light Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

IR Cut Filter (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Advanced Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

AGC Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Auto Iris. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Auto Sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Auto White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Backlight Compensation (BLC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Video Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Wide Dynamic Range (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Park Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Power Up Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Line Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Enable Motion Detection (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Edit Detection Areas (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Activate AUX Command (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

AUX Time (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Window Blanking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Clear Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

C1301M (6/05)

3

Wiper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Wiper Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Wiper Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Wiper Dwell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Wiper Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Set Washer Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Aux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Reset, Cycle Power, Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Reset Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Cycle Camera Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Reboot System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Software/Language File Upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Upload Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4

C1301M (6/05)

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

C1301M (6/05)

5

Welcome

Thank you for purchasing Pelco’s ExSiteEHXM Series explosionproof system. Your new system features a high resolution camera/optics package with programmable software.

This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about the features and commands of your EHXM system, as well as a detailed menu tree.

MODELS

EHXM30C22-2 Fixed IOP system with color camera, 60 Hz, 24 VAC

EHXM30C22-2X Fixed IOP system with color camera, 50 Hz, 24 VAC

EHXM31C22-2 Same as EHXM30C22-2, except supplied with window wiper

EHXM31C22-2X Same as EHXM30C22-2X, except supplied with window wiper

EHXM30CBW23-2 Fixed IOP system with day/night camera, 60 Hz, 24 VAC

EHXM30CBW23-2X Fixed IOP system with day/night camera, 50 Hz, 24 VAC

EHXM31CBW23-2 Same as EHXM30CBW23-2, except supplied with window wiper

EHXM31CBW23-2X Same as EHXM30CBW23-2X, except supplied with window wiper

EHXM30C22-7 Fixed IOP system with color camera, 60 Hz, 90-264 VAC

EHXM30C22-7X Fixed IOP system with color camera, 50 Hz, 90-264 VAC

EHXM31C22-7 Same as EHXM30C22-7, except supplied with window wiper

EHXM31C22-7X Same as EHXM30C22-7X, except supplied with window wiper

EHXM30CBW23-7 Fixed IOP system with day/night camera, 60 Hz, 90-264 VAC

EHXM30CBW23-7X Fixed IOP system with day/night camera, 50 Hz, 90-264 VAC

EHXM31CBW23-7 Same as EHXM30CBW23-7, except supplied with window wiper

EHXM31CBW23-7X Same as EHXM30CBW23-7X, except supplied with window wiper

GETTING STARTED

DANGER: Do not connect the power module to a supply circuit unless all ExSite system components (enclosure, camera module and power module) are installed.

You will need to install your system before using this manual. Refer to the installation manuals for installation instructions. Once installed apply power to the system. The system will start a configuration sequence. When configuration is done, the following information is displayed on the monitor:

EXSITE EHXM

Version X.XX

D Address: 1

P Address: 2

Comm 2400, N, 8, 1

CONFIGURE DONE

This information will remain on the monitor until system operation begins. Refer to the following pages to learn how to operate and program your EHXM Series system.

6

C1301M (6/05)

How to Operate Your System

Operation

How to Control

Zoom Far

To zoom far, do the following:

1.Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.

2.Release the button or joystick for one second.

3.To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want or reach the digital zoom* limit.

Zoom Wide

Press the Zoom Wide button or turn the joystick counterclockwise.

Alarms

Refer to the Alarms section.

C1301M (6/05)

7

ACCESSING MAIN MENU (PRESET 95)

You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode).

Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers.

CM6700/CM6800

1.Enter the number of the ExSite EHXM system and press the CAM key.

2.Enter 95 and hold the PRESET key for two seconds.

3.In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.

KBD200A/KBD300A (DIRECT MODE ONLY)

1.Enter 95.

2.Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

CM9500

1.Enter the number of the ExSite EHXM system and press the CAM key. The Main menu appears.

2.Highlight SETUP in the Main menu and press the SELECT key.

3.Highlight CAM in the Setup menu and press the SELECT key.

4.Highlight PRESET in the Camera menu and press the SELECT key.

5.Enter 95 and press the F1 key. The main menu appears.

CM9700 SERIES

1.Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu appears.

2.Enter your four-digit PIN if this is your first time entering this mode.

3.Enter 95 and select PRST. The main menu appears on the monitor.

4.Select the Quit icon to return to the default menu.

KBD4000/KBD4002

1.Press the SPOT MONITOR key.

2.Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

MPT9500

Standard Coaxitron Mode

1.Enter 95 and press the PRESET SET key.

2.Position the asterisk in the YES row and press the F1 key. The main menu appears.

Extended Coaxitron or RS-485 Mode

1.Enter 95 and press the PRESET SET key.

2.Press the F2 key. The main menu appears.

NET300/NET350/NET4001A

1.Check the Set box.

2.Click the preset 95 button. The main menu appears.

8

C1301M (6/05)

Pelco EHXM31CBW23-2, EHXM31CBW23-2X, EHXM31C22-7, EHXM31C22-7X, EHXM30CBW23-2 User Manual

Quick Start Guide – System Setup

Presets

The following presets are reserved for special functions.

Preset Function

86Wiper

87Washer

88IR filter IN (color)

89IR filter OUT (black-white)

95

Select main programming menu

NOTE: For American Dynamics controllers with only 32 presets, switch SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset

95 becomes 28

89 becomes 22

88 becomes 21

CAMERA

OTHER

 

POWER UP

TYPE OF LIGHTING

 

PARK TIME (MINUTES)

 

POWER UP ACTION

AUTO FOCUS

PARK ACTION

 

 

ZOOM LIMIT

BACK

 

BACK

ZOOM SPEED

 

EXIT

LOW LIGHT LIMIT

EXIT

 

 

IR CUT FILTER*

 

 

 

AUTO IR LEVEL*

 

 

 

<ADVANCED SETTINGS>

 

 

 

BACK

 

 

 

EXIT

 

 

 

ADVANCED SETTINGS

 

 

 

 

 

 

 

SHUTTER SPEED

 

 

 

 

AGC LIMIT

 

 

 

AUTO IRIS

 

 

 

AUTO IRIS LEVEL

 

 

 

AUTO IRIS PEAK

 

 

 

AUTO SHARPNESS

 

 

 

SHARPNESS LEVEL

 

 

 

AUTO WHITE BALANCE

 

 

 

R GAIN

 

 

 

B GAIN

 

 

 

BACKLIGHT COMP

 

 

 

VIDEO LEVEL

 

 

 

WIDE DYNAMIC RANGE*

 

 

 

BACK

 

 

 

EXIT

 

 

 

ADDITIONAL

FREE MEMORY LAST RESET CAMERA ACTIVE FPGA VERSION VIDEO LEVEL <CAMERA> <EAB>

<PMAB>

LANGUAGE 1

LANGUAGE 2

LANGUAGE 3

LANGUAGE 4

LANGUAGE 5

LANGUAGE 6

LANGUAGE 7

LANGUAGE 8

LANGUAGE 9

LANGUAGE 10

BACK

EXIT

LYNE SYNC

LINE SYNC

LINE SYNC PHASE

BACK

EXIT

*Available only with the 23X day/night camera.

**Available only with wiper models.

PELCO EXSITE EHXM

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP>

<UNIT SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

Quick Programming Guide

Access the main menu (preset 95). Refer to

Accessing Main Menu (Preset 95) section.

Use the joystick to position the cursor beside menu selection. If your controller does not have a joystick, use the up or down key.

SYSTEM INFORMATION

 

DISPLAY SETUP

 

LABEL POSITION

 

UNIT SETTINGS

UNIT MODEL

 

PRESET LABEL

 

[PRESET LABEL- - - ---]

 

<CAMERA>

POWER MODULE MEMORY

 

ZOOM

 

[ALARM 1- - - - - - -]

 

<OTHER>

SOFTWARE VERSION

 

ALARM MESSAGE

 

 

 

<POWER UP>

BIOS VERSION

 

 

 

SAVE AND EXIT

 

<LINE SYNC>

FONT VERSION

 

<LABEL POSITIONS>

 

CANCEL AND EXIT

 

<PRESETS>

 

 

RESTORE FACTORY DEFAULTS

 

HELP

 

<PATTERNS>

COMM

 

BACK

 

 

 

<WINDOW BLANKING>

D ADDRESS

 

 

XXX.XXX

 

<ALARMS>

P ADDRESS

 

EXIT

 

 

 

<WIPER>

CM9500 MODE

 

 

 

 

 

<AUX>

32 PRESETS

 

 

 

 

 

<CLEAR>

PROTOCOL

 

 

 

 

 

<PASSWORD>

<ADDITIONAL>

 

 

 

 

 

BACK

BACK

 

 

 

 

 

EXIT

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

Press Iris Open; the submenu/cursor moves to the right.

Move the joystick up or down to view selections. If your controller does not have a joystick, use the up or down key.

Press Iris Open to make selection.

Press Iris Close to cancel selection.

PRESETS

 

PATTERNS

 

WINDOW BLANKING

 

ALARMS

 

WIPER**

 

AUX

 

CLEAR

 

PASSWORD

PRESET NUMBER

PATTERN NUMBER

 

STYLE

 

RESUME

 

WIPER CONTROL

 

AUX 1 MODE

 

CLEAR ALL PRESETS

 

ENABLE PASSWORD

PRESET NOT DEFINED

<PROGRAM PATTERN>

 

<SET WINDOWS>

 

SEQUENCE (SECS)

 

WIPER MODE

 

DWELL TIME (SECS)

 

CLEAR ALL PATTERNS

 

<EDIT PASSWORD>

<CLEAR PATTERN>

 

 

RESET DELAY (SECS)

 

WIPER DWELL (SECS)

 

 

 

CLEAR ALL WINDOW BLANKING

 

 

 

<EDIT PRESET LABEL>

BACK

 

BACK

 

 

 

WIPER TIME (MIN)

 

AUX 2 MODE

 

RESTORE FACTORY DEFAULTS

 

BACK

 

 

 

<ALARM SETTINGS>

 

 

 

DWELL TIME (SECS)

 

 

EXIT

 

<EDIT PRESET SCENE>

EXIT

 

EXIT

 

 

 

<SET WASHER SEQUENCE>

 

 

 

 

 

 

 

<EDIT CAMERA SETTINGS>

 

 

 

 

BACK

 

 

 

BACK

 

BACK

 

 

 

<MOTION DETECTION>*

REFERENCE INFORMATION

 

 

 

EXIT

 

BACK

 

EXIT

 

EXIT

 

 

 

<CLEAR PRESETS>

PATTERN USAGE

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

REMAINING

 

 

 

 

 

 

 

 

 

 

 

 

 

<CLEAR CAMERA SETTINGS>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MOTION DETECTION*

 

 

SET WINDOWS

 

ALARM SETTINGS

 

SET WASHER SEQUENCE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EDIT THE PASSWORD

MOTION DETECTION ENABLED

 

 

 

WINDOW NUMBER

 

ALARM NUMBER

 

PRESET NOT DEFINED

 

 

 

 

 

<EDIT DETECTION AREA>

 

 

 

 

 

 

 

 

 

 

 

- - - - - - - - - - - - - - - - -

ACTIVATE AUX

 

 

<EDIT WINDOW LOCATION>

 

ALARM PRIORITY

 

<EDIT PRESET LABEL>

 

 

 

 

1234567890

OK

 

 

<EDIT WINDOW ZOOM>

 

ALARM ACTION

 

<EDIT PRESET SCENE>

 

 

 

 

 

ABCDEFGHIJ

CANCEL

AUX TIME

 

 

ENABLE WINDOW

 

ACTIVATE AUX

 

<EDIT CAMERA SETTINGS>

 

 

 

 

 

KLMNOPQRST

 

BACK

 

 

 

ALARM CONTACT

 

 

 

 

 

 

 

UZWXYZ.,-/

SPACE

 

 

REVERSE

 

 

 

WASHER TIME (SECS)

 

 

 

 

 

abcdefghij

BACKSPACE

EXIT

 

 

CLEAR WINDOW

 

BACK

 

WIPER DELAY (SECS)

 

 

 

 

 

klmnopqrst

 

 

 

 

 

BACK

 

EXIT

 

AUTO RETURN

 

 

 

 

 

uvwxyz*;:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXIT

 

 

 

<CLEAR PRESET>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<CLEAR CAMERA SETTINGS>

 

 

 

 

 

 

 

BACK

EXIT

EDIT DETECTION AREA*

DETECTION AREA 1

LOCATION

SENSITIVITY

DETECTION AREA 2

LOCATION

SENSITIVITY

DETECTION AREA 3

LOCATION

SENSITIVITY

DETECTION AREA 4

LOCATION

SENSITIVITY

BACK

EXIT

C1301M (6/05)

9

10

C1301M (6/05)

Language

PELCO EXSITE EHXM

LANGUAGE

ENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP>

<UNIT SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER

EXIT

The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Polish, Russian, Turkish, and Czecholslovakian. The factory default language is English.

To change the display language:

1.Use the joystick to position the cursor beside LANGUAGE.

2.Press Iris Open. The cursor moves to the right, beside the current, selected language.

3.Move the joystick up or down to view selections. Press Iris Open to enter selection. All on-screen menus are changed to the selected language.

Quick Programming Guide

(See Page 9)

C1301M (6/05)

11

System Information

PELCO EXSITE EHXM

LANGUAGE

ENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP>

<UNIT SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

SYSTEM INFORMATION

UNIT MODEL

EHXM30C22

POWER MODULE MEMORY

AVAILABLE

SOFTWARE VERSION

0.90.9013

BIOS VERSION

8.00.9000

FONT VERSION

1.00

COMM

2400,N,8,1

D ADDRESS

1

P ADDRESS

2

CM9500 MODE

OFF

32 PRESETS

OFF

PROTOCOL

D

<ADDITIONAL>

BACK

EXIT

 

ADDITIONAL

FREE MEMORY

30464

LAST RESET

3

CAMERA ACTIVE

YES

FPGA VERSION

2

VIDEO LEVEL

HIGH

CAMERA

XXXX-XXXX

<EAB>*

 

<PMAB>**

 

LANGUAGE 1

ENGLISH 1.00

LANGUAGE 2

ESPANOL 1.00

LANGUAGE 3

ITALIANO 1.00

LANGUAGE 4

DEUTSCH 1.00

LANGUAGE 5

PORTUGUES 1.00

LANGUAGE 6

FRANCAIS 1.00

LANGUAGE 7

CESKY 1.00

LANGUAGE 8

POLSKI 1.00

LANGUAGE 9

RUSSIAN 1.00

LANGUAGE 10

TURKISH 1.00

BACK

 

EXIT

 

The System Information screen displays ExSite model, software version, available memory, and other diagnostic information.

System settings cannot be changed using this screen. This screen is for reference only.

Use the following steps to display the System Information screen:

1.Use the joystick to position the cursor beside SYSTEM INFORMATION.

2.Press Iris Open. The SYSTEM INFORMATION window opens.

*EAB (Enclosure Accessory Board) – The EAB information screen displays availability, version, and part number of the enclosure accessory board

**PMAB (Power Module Accessory Board) – The EAB information screen displays availability, version, and part number of the power module accessory board.

12

C1301M (6/05)

Loading...
+ 28 hidden pages