Hard Disk Drive
Replacement Instructions
C2647M (10/06)
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Parts and Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Hard Disk Drive Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preparing the Unit to Install a Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing a Hard Disk Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Reassembling the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Rear Panel Connectors for the DVR5100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 |
C2647M (10/06) |
This manual provides instructions for installing a replacement hard disk drive or upgrading to a higher capacity hard disk drive in a DVR5100 Series DVR (digital video recorder).
The following models numbers are available for hard disk replacements or upgrades for the DVR5100:
DVR5KRP-250 |
Replacement kit containing a 250 GB hard disk drive |
|
|
DVR5KRP-400 |
Replacement kit containing a 400 GB hard disk drive |
|
|
DVR5KRP-500 |
Replacement kit containing one 500 GB hard disk drive |
|
|
DVR5KUP-250-500 |
Upgrade kit containing a 250 GB hard disk drive |
|
|
DVR5KUP-250-800 |
Upgrade kit containing two 400 GB hard disk drives |
|
|
DVR5KUP-250-1TB |
Upgrade kit containing two 500 GB hard disk drives |
|
|
DVR5KUP-500-800 |
Upgrade kit containing two 400 GB hard disk drives |
|
|
DVR5KUP-500-1TB |
Upgrade kit containing two 500 GB hard disk drives |
|
|
DVR5KUP-800-1TB |
Upgrade kit containing two 500 GB hard disk drives |
|
|
NOTE: This kit includes one or more Pelco-certified hard disk drives. Using any other hard disk drive with the DVR5100 voids the manufacturer's warranty for the DVR5100.
Before proceeding, make sure that your replacement or upgrade kit contains the following parts:
QTY
1 or 2
4 or 8
1
Description
Pelco-certified hard disk drives, either 250, 400, or 500 GB (Refer to the model number to confirm the quantity and capacity of the included drives.)
6-32 x 3/16 Phillips pan head screws
ESD disposable wrist strap
To install the replacement drive, you will also need a Phillips screwdriver and an optional small container to store screws.
C2647M (10/06) |
3 |
1.Familiarize yourself with the instructions throughout this manual.
2.Check that you have all the necessary parts and tools. Refer to Parts and Tools on page 3.
3.If possible, export all essential video before you install a new hard disk drive. If your unit contains two hard disk drives, export all essential video on the unaffected drive as well. Follow the instructions for exporting video in the operation manual.
4.Shut down the DVR5100 DVR unit. Refer to the DVR5100 installation or operation manuals for instructions on shutting down the unit.
5.Unplug the power cord from the wall socket and then from the rear of the DVR.
WARNING: For safety reasons, you must remove the power cord because current continues to flow through the DVR5100 even when the unit is off. Remove the power cord from the wall socket first and then from the rear of the DVR. It is critical that the unit be unplugged for your safety.
Figure 1. Removing the Power Cord
4 |
C2647M (10/06) |
6.Ensure that the DVR5100 DVR and all of its components are protected from electrostatic discharge (ESD). Before handling any electronic components, you should take steps to ground yourself properly so that any built-up static electric charges are dissipated away from the unit. The most effective method for combating ESD is to use a properly grounded wrist strap (refer to Figure 2). These wrist straps are designed to be plugged into specially-designed mats.
Figure 2. ESD Protection
A disposable ESD wrist strap (refer to Figure 3) is included with this kit. Attach the copper end of this wrist strap to any unpainted surface of an appliance that is grounded. An appliance is considered grounded if it can direct ESD to the earth, usually through its power cable. An appliance that is plugged into an electrical outlet is considered grounded. The DVR5100 is not considered grounded when it is unplugged. As an alternative, you can discharge builtup static by periodically touching an unpainted section of an appliance.
COPPER END
Figure 3. Disposable Wrist Strap for ESD Protection
C2647M (10/06) |
5 |