OPERATION/PROGRAMMING
® |
Spectra III™ Series |
|
|
Models DD53TC16 & DD53TC16-X
C2446M-E (11/05)
OPERATION/PROGRAMMING MANUAL
MODELS DD53TC16 & DD53TC16-X
16X LowLight™ COLOR TECHNOLOGY
4 |
C2446M-E (11/05) |
CONTENTS
WELCOME ................................................................................................................................................................................................. |
7 |
GETTING STARTED ........................................................................................................................................................................... |
7 |
HOW TO OPERATE YOUR DOME SYSTEM ............................................................................................................................................... |
8 |
ACCESSING MAIN MENU (PRESET 95) ........................................................................................................................................... |
9 |
CM6700/CM6800 .................................................................................................................................................................... |
9 |
KBD200A/KBD300A (DIRECT MODE ONLY) ............................................................................................................................ |
9 |
CM9500 ................................................................................................................................................................................... |
9 |
CM9740/CM9760/CM9770/CM9780 ..................................................................................................................................... |
9 |
KBD4000/KBD4002 ............................................................................................................................................................... |
10 |
MPT9500 ............................................................................................................................................................................... |
10 |
NET300/NET350/NET4001A ................................................................................................................................................. |
10 |
WS5050 ................................................................................................................................................................................. |
10 |
VCD5000 ................................................................................................................................................................................ |
10 |
QUICK START GUIDE – SYSTEM SETUP ................................................................................................................................................. |
11 |
LANGUAGE .............................................................................................................................................................................................. |
13 |
SYSTEM INFORMATION .......................................................................................................................................................................... |
14 |
DISPLAY SETUP ....................................................................................................................................................................................... |
15 |
LABEL POSITION ............................................................................................................................................................................. |
16 |
DOME SETTINGS ..................................................................................................................................................................................... |
17 |
CAMERA ......................................................................................................................................................................................... |
17 |
AUTO FOCUS ......................................................................................................................................................................... |
17 |
ZOOM LIMIT .......................................................................................................................................................................... |
17 |
ZOOM SPEED ......................................................................................................................................................................... |
17 |
LOW LIGHT LIMIT .................................................................................................................................................................. |
17 |
ADVANCED CAMERA SETTINGS ................................................................................................................................................... |
18 |
SHUTTER SPEED .................................................................................................................................................................... |
18 |
AGC LIMIT ............................................................................................................................................................................. |
18 |
AUTO IRIS .............................................................................................................................................................................. |
19 |
AUTO SHARPNESS ................................................................................................................................................................ |
20 |
AUTO WHITE BALANCE ........................................................................................................................................................ |
20 |
BACKLIGHT COMPENSATION (BLC) ...................................................................................................................................... |
21 |
VIDEO LEVEL .......................................................................................................................................................................... |
21 |
MOTION SETTINGS ........................................................................................................................................................................ |
22 |
AUTO FLIP .............................................................................................................................................................................. |
22 |
PROPORTIONAL PAN ............................................................................................................................................................. |
22 |
PARK TIME ............................................................................................................................................................................ |
23 |
SCAN SPEED ......................................................................................................................................................................... |
24 |
LIMIT STOPS .......................................................................................................................................................................... |
24 |
AZIMUTH ZERO ..................................................................................................................................................................... |
25 |
C2446M-E (11/05) |
5 |
POWER UP ...................................................................................................................................................................................... |
26 |
POWER UP ACTION ............................................................................................................................................................... |
26 |
LINE SYNC ...................................................................................................................................................................................... |
27 |
PRESETS ......................................................................................................................................................................................... |
28 |
PATTERNS ....................................................................................................................................................................................... |
29 |
ZONES ............................................................................................................................................................................................ |
30 |
TITLE TEXT ...................................................................................................................................................................................... |
31 |
ALERT ............................................................................................................................................................................................. |
32 |
REPEAT ................................................................................................................................................................................... |
32 |
ACK ACTION .......................................................................................................................................................................... |
33 |
ACTIVATE AUX ....................................................................................................................................................................... |
33 |
CURRENT READING .............................................................................................................................................................. |
33 |
RESET ALERT ......................................................................................................................................................................... |
33 |
CLEAR ............................................................................................................................................................................................. |
34 |
PASSWORD .................................................................................................................................................................................... |
35 |
RESET, CYCLE POWER, REBOOT ............................................................................................................................................................. |
36 |
RESET CAMERA .................................................................................................................................................................... |
36 |
CYCLE CAMERA POWER ....................................................................................................................................................... |
36 |
REBOOT SYSTEM .................................................................................................................................................................. |
36 |
SOFTWARE/LANGUAGE FILE UPLOAD ................................................................................................................................................... |
37 |
UPLOAD ICON ................................................................................................................................................................................. |
37 |
SPECIFICATIONS ...................................................................................................................................................................................... |
38 |
DD53TC16 .............................................................................................................................................................................. |
38 |
DD53TC16-X .......................................................................................................................................................................... |
38 |
REGULATORY NOTICES ........................................................................................................................................................................... |
39 |
6 |
C2446M-E (11/05) |
Thank you for purchasing Pelco’s premier integrated dome system, Spectra III. Your new system features a high resolution, color camera/optics package with LowLight™ technology and programmable dome drive software.
This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about Spectra III’s features and commands, as well as a detailed menu tree.
You will need to install your dome system before using this manual. Refer to the installation packet supplied with the back box for installation instructions.
Once installed apply power to the Spectra III dome system. The system will start a configuration sequence. When configuration is done, the following information is displayed:
Pelco Spectra III
*Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
*Pressurized Spectra III dome systems require software version 1.25 or higher to monitor temperature, pressure, and dew point.
C2446M-E (11/05) |
7 |
Operation |
How to Control |
Pan and Tilt |
Move joystick or press the direction keys left/right and up/down. |
Zoom Far |
To zoom far, do the following: |
|
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. |
|
2. Release the button or joystick for one second. |
|
3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the |
|
picture you want or reach the digital zoom1 limit. |
Zoom Wide |
Press the Zoom Wide button or turn the joystick counterclockwise. |
Scanning |
|
Stop Scan |
Preset 96 |
Random Scan |
Preset 97 |
Frame Scan |
Preset 98 |
Auto Scan |
Preset 99 |
Presets |
Refer to the documentation supplied with the control system. |
Patterns2 |
Refer to the documentation supplied with the control system. |
Zones |
Refer to the Zones section and to the documentation supplied with the control system. |
Alarms |
Refer to the Alarms section in this manual. |
Auto Flip |
Turn on or off in the programming menu. Refer to the Auto Flip section in this manual. |
1Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in resolution.
2The dome cannot do digital zoom in a pattern. Optical zoom will operate in a pattern.
8 |
C2446M-E (11/05) |
You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode).
Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers.
CM6700/CM6800
1.Enter the number of the Spectra dome system and press the CAM key.
2.Enter 95 and hold the PRESET key for two seconds.
3.In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.
1.Enter 95.
2.Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.
CM9500
1.Enter the number of the Spectra dome system and press the CAM key. The Main menu appears.
2.Highlight SETUP in the Main menu and press the SELECT key.
3.Highlight CAM in the Setup menu and press the SELECT key.
4.Highlight PRESET in the Camera menu and press the SELECT key.
5.Enter 95 and press the F1 key. The main menu appears.
CM9740/CM9760/CM9770/CM9780
1.Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu appears.
2.Enter your four-digit PIN if this is your first time entering this mode.
3.Enter 95 and select PRST. The main menu appears on the monitor.
4.Select the Quit icon to return to the default menu.
(Continued on next page)
C2446M-E (11/05) |
9 |
KBD4000/KBD4002
1.Press the SPOT MONITOR key.
2.Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.
MPT9500
Standard Coaxitron Mode
1.Enter 95 and press the PRESET SET key.
2.Press the F1 key, the main menu appears on the screen.
Extended Coaxitron or RS-485 Mode
1.Enter 95 and press the PRESET SET key.
2.Press the F2 key. The main menu appears.
NET300/NET350/NET4001A
1.Check the Set box.
2.Click the preset 95 button. The main menu appears.
WS5050
1.Right-click in the video pane of the Spectra dome system.
2.Click Preset and then click Select Preset.
3.Enter 95 and then click OK.
VCD5000
1.Enter 95 for the preset action. The shortcuts menu appears.
2.Press the Preset button on the KBD5000.
10 |
C2446M-E (11/05) |
QUICK START GUIDE – SYSTEM SETUP
Presets
The following presets are reserved for special functions.
Preset Function
33Flip command
34Pan zero command 83-89 Reserved
90-91 Manual limit stops
92-93 Scan limit stops
94Reserved
95Select main programming menu
96Stop a scan
97Random scanning
98Frame scanning
99Start auto scanning
NOTE: For American Dynamics controllers with only 32 presets, switch SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset
99 becomes 32 |
92 becomes 25 |
98 becomes 31 |
91 becomes 24 |
97 becomes 30 |
90 becomes 23 |
96 becomes 29 |
89 becomes 22 |
95 becomes 28 |
88 becomes 21 |
93 becomes 26 |
|
If the limit stops are turned off, presets 23-26 can be used as regular presets.
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES> <TITLE TEXT> <ALERT>** <CLEAR> <PASSWORD>
BACK
EXIT
|
SPECTRA III |
|
|
|
LANGUAGE |
ENGLISH |
|
|
<SYSTEM INFORMATION> |
|
|
|
<DISPLAY SETUP> |
|
|
|
<DOME SETTINGS> |
|
|
|
ACK ALERT** |
|
|
|
RESET CAMERA |
|
|
|
CYCLE CAMERA POWER |
|
|
|
REBOOT SYSTEM |
|
|
|
EXIT |
|
|
|
DISPLAY SETUP |
|
|
PRESET LABEL |
(2 SECS) |
||
ZONE LABEL |
(2 SECS) |
||
ZOOM |
(2 SECS) |
||
AZIMUTH/ELEVATION |
(2 SECS) |
||
DIRECTION |
OFF |
||
ALARM MESSAGE |
(2 SECS) |
<LABEL POSTIONS> RESTORE FACTORY DEFAULTS
BACK
EXIT
LABEL POSITION
[ZONE LABEL------] [PRESET LABEL------] [ALERT MESSAGE-----]** [TITLE TEXT]
SAVE AND EXIT
CANCEL AND EXIT
HELP
XXX°/-XX°
NE
XXX.XXX
SYSTEM INFORMATION
DOME DRIVE MODEL |
|
DD53TC16 |
||
BACK BOX MEMORY |
|
AVAILABLE |
||
SOFTWARE VERSION |
|
XX.X |
||
BIOS VERSION |
|
XX.X |
||
FONT VERSION |
|
XX.X |
||
COMM |
|
2400, N, 8, 1 |
||
D ADDRESS |
|
1 |
||
P ADDRESS |
|
2 |
||
CM9500 MODE |
|
OFF |
||
32 PRESETS |
|
OFF |
||
PROTOCOL |
|
C |
||
PRESSURIZED** |
|
X.XX |
||
<ADDITIONAL> |
|
|
|
|
BACK |
|
|
|
|
EXIT |
|
|
|
|
|
|
|
||
|
|
|
|
|
ADDITIONAL |
|
|
||
FREE MEMORY |
|
18304 |
|
|
LAST RESET |
|
POWER ON |
||
AZIMUTH ZERO OFFSET |
0O |
|||
MOTOR ACTIVE |
|
YES |
||
CAMERA ACTIVE |
|
YES |
||
FPGA VERSION |
|
X |
||
VIDEO LEVEL |
|
NORMAL |
||
CAMERA |
|
XXXX-XXXX |
||
LANGUAGE 1 |
ENGLISH X.XX |
|||
LANGUAGE 6 |
ITALIANO X.XX |
|||
BACK |
|
|
|
|
EXIT |
|
|
|
CAMERA |
|
|
MOTION |
|
|
POWER UP |
|
LINE SYNC |
|
|
PRESETS |
|
|
PATTERNS |
|
|
AUTO FOCUS |
ON |
AUTO FLIP |
ON |
POWER UP ACTION AUTO |
|
LINE SYNC |
ON PRESET NUMBER |
1 PATTERN NUMBER |
1 |
|
||||||
ZOOM LIMIT |
X128 |
PROPORTIONAL PAN |
ON |
|
|
|
LINE SYNC PHASE |
0 * * * PRESET NOT DEFINED * * * |
|
|
<PROGRAM PATTERN> |
|
|
|||
ZOOM SPEED |
MEDIUM |
PARK TIME (MINUTES) |
0 |
|
|
|
|
|
<EDIT PRESET LABEL> |
|
|
<CLEAR PATTERN> |
|
|
||
LOW LIGHT LIMIT |
2 |
PARK ACTION |
NONE |
BACK |
|
BACK |
|
<EDIT PRESET SCENE> |
|
|
BACK |
|
|
|||
|
|
|
SCAN SPEED DEG/S |
25 |
|
|
<CLEAR PRESET> |
|
|
|
|
|||||
<ADVANCED SETTINGS> |
|
|
LIMIT STOPS |
ON |
EXIT |
|
EXIT |
|
|
|
EXIT |
|
|
|||
|
|
|
|
|
|
|
|
BACK |
|
|
REFERENCE INFORMATION |
|||||
BACK |
|
|
<SET MANUAL STOPS> |
|
|
|
|
|
|
EXIT |
|
|
||||
|
|
<CLEAR MANUAL STOPS> |
|
|
|
|
|
|
|
|
PATTERN USAGE |
0% |
|
|||
EXIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
<SET SCAN STOPS> |
|
|
|
|
|
|
REFERENCE INFORMATION |
|
|
REMAINING |
100% |
|
|
|
|
|
<CLEAR SCAN STOPS> |
|
|
|
|
|
|
- |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
AZIMUTH |
|
|
|
|
||
|
|
|
<SET AZIMUTH ZERO> |
|
|
|
|
|
|
|
ELEVATION |
- |
|
|
|
|
|
|
|
<CLEAR AZIMUTH ZERO> |
|
|
|
|
|
|
|
ZOOM |
- |
|
|
|
|
|
|
|
BACK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EXIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
ADVANCED SETTINGS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SHUTTER SPEED |
AUTO |
|
|
|
* If your controller does not have a joystick, use the up or down key. |
|
|
|||||||||
AGC LIMIT |
25 |
|
|
|
|
|
||||||||||
AUTO IRIS |
AUTO |
|
|
|
** This setting only applies to Pressurized Spectra III dome systems with software version |
|||||||||||
AUTO IRIS LEVEL |
66 |
|
|
|
||||||||||||
AUTO IRIS PEAK |
8 |
|
|
|
1.25 or higher. Spectra III systems that are not pressurized or pressurized systems that do |
|||||||||||
AUTO SHARPNESS |
ON |
|
|
|
||||||||||||
SHARPNESS LEVEL |
26 |
|
|
|
not have dome drive software version 1.25 or higher will not display this menu item. |
|
|
|||||||||
AUTO WHITE BALANCE |
ON |
|
|
|
|
|
||||||||||
R GAIN |
482 |
|
|
|
Software version 1.25 or higher includes the software to monitor temperature, pressure, |
|||||||||||
B GAIN |
678 |
|
|
|
||||||||||||
BACKLIGHT COMP |
OFF |
|
|
|
and dew point for Pressurized Spectra III systems. |
|
|
|
|
|
||||||
VIDEO LEVEL |
HIGH |
|
|
|
|
|
|
|
|
BACK
EXIT
ZONES |
|
|
TITLE TEXT |
ZONE NUMBER |
1 |
|
ENABLE TITLE TEXT |
* * * ZONE NOT DEFINED * * * |
|
|
<EDIT TITLE TEXT> |
<EDIT ZONE LABEL> |
|
|
|
<EDIT ZONE> |
NO |
|
|
ZONE ENABLED |
|
BACK |
|
ZONE BLANKING |
OFF |
|
EXIT |
<CLEAR ZONE> |
|
|
|
BACK |
|
|
|
EXIT |
|
|
|
Quick Programming Guide
Access main menu (preset 95). See the Accessing Main Menu (Preset 95) section.
Use the joystick* to position the cursor beside menu selection.
Press Iris Open, the submenu/cursor moves to the right.
Move the joystick up or down to view selections.
Press Iris Open to make selection.
Press Iris Close to cancel selection.
ALERT** |
|
|
CLEAR |
|
PASSWORD |
|
REPEAT |
CONSTANT |
|
RESTORE FACTORY DEFAULTS |
ENABLE PASSWORD |
OFF |
|
ACK ACTION |
ALWAYS ON |
|
|
<EDIT PASSWORD> |
|
|
ACTIVATE AUX |
NO |
|
BACK |
|
|
|
<CURRENT READING> |
|
|
EXIT |
BACK |
|
|
RESET ALERT |
|
|
|
|
||
BACK |
|
|
|
EXIT |
|
|
|
|
|
|
|
|
|
EXIT |
|
|
|
|
|
|
CURRENT READING** |
EDIT THE PASSWORD |
|
|
TEMPERATURE |
0°C |
---------- |
|
|
|
||
|
0°F |
1234567890 |
OK |
DEWPOINT |
0°C |
ABCDEFGHIJ |
CANCEL |
|
0°F |
KLMNOPQRST |
|
PRESSURE |
0.0 PSIG |
UVWXYZ.,-/ |
SPACE |
|
0.0 BAR |
abcdefghij |
BACKSPACE |
REFRESH |
|
klmnopqrst |
|
BACK |
|
uvwxyz#&:* |
|
|
|
|
|
EXIT |
|
|
|
C2446M-E (11/05) |
11 |
12 |
C2446M-E (11/05) |
SPECTRA III
LANGUAGE |
ENGLISH |
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, Turkish, and Czechoslovakian. The factory default language is English.
NOTE: The dome system cannot store all 10 languages in its memory. There are two language packages available. The standard language package includes English, Spanish, Portuguese, Italian, French, and German. The alternate package includes English, Russian, Polish, Turkish, and Czechoslovakian. If your dome system does not have the language package that you require, you must upload the other language package. Refer to the Software/Language File Upload section.
To change the display language:
1.Use the joystick to position the cursor beside LANGUAGE.
2.Press Iris Open. The cursor moves to the right, beside the current, selected language.
3.Move the joystick up or down to view selections. Press Iris Open to enter selection. All on-screen menus are changed to the selected language.
Quick Programming Guide
(See page 11)
C2446M-E (11/05) |
13 |