Pelco CCQ1400A-4 User Manual

®

CCQ1400A-4

Color CCD Camera

with 4 mm Lens

Installation/

Operation Manual

C1969M-A (1/02)

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com

In North America and Canada: Tel [phone] or FAX [phone]

International Customers: Tel [phone] or FAX [phone]

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P encolsure, it is designed for indoor use only
and it must not be installed where exposed to rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. When used with the CCQ1400A-4 cameras with audio, the Pelco PCMQ14A Observation System is capable of being used as a
two-way intercom system. Applications other than the intended use as a two-way intercom communications system may vio-
late Federal wiretapping laws. No systems may be used to monitor audio without the express knowledge of the parties
being monitored. A warning notice has been included as a part of this manual. Photocopying of this notice is permitted and en­couraged. Signs
CCQ1400A-4 intercom system. Pelco assumes no liability for equipment being used for purposes other than the intended use
as a two-way intercom system.

5. Do not attempt to disassemble the unit.

6. Do not remove screws or cover.

7. There are no user-serviceable parts inside.

8. Do not install any of the system parts where they will be exposed to water, excessive dust or excessive vibration.

The product and/or manual may bear the following marks:

must

be posted and plainly visible at all entrances to public and private premises utilizing the PMCQ14A/

This symbol indicates that dangerous volt­age constituting a risk of electric shock is
present within this unit.

This symbol indicates that there are impor­tant operating and maintenance instructions
in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

2 Pelco Manual C1969M-A (1/02)

DESCRIPTION

OVERVIEW

The CCQ1400A-4 color CCD camera with 4 mm lens is designed for use with the PMCQ14A 14-inch color quad monitor.
A mini-DIN 6 connector in the back of the camera matches the connector on the back of the monitor. Power, alarm, audio and video

contacts are all provided at this connector.

MODELS

CCQ1400A-KIT Camera assembly with audio, consisting of one CCQ1400A-4 camera, one WMQ8 bracket and one

CCQCABLE-60 cable.

CCQ1400A-4 1/4-inch color CCD camera with 4 mm lens, 12 VDC, with a microphone and speaker

INSTALLATION

INSTALLATION TIPS

• Do not locate components or cable where they will get wet.

NO SHARP BENDS

• Lay cable loosely in attic or under floor.

• Do not tightly bundle with other wires.

•Avoid sharp bends in the cable.

• Do not directly staple the cable to any surface.

•Try to locate cable away from power lines and fluorescent fixtures.

• If a power line or fixture is in the way, take the cable across it at right angles.

• Do not run cables parallel to fixtures or power lines.

STORE EXTRA CABLE
SERPENTINE FASHION

• The cable is 60 feet long. Do not try to shorten it.

• Extra cable should be spread out serpentine style.

•Avoid coiling up extra cable.

CROSS AC POWER LINES AND FLORESCENT
FIXTURES AT RIGHT ANGLES

NO STAPLES

AC

VIDEO

UNPACKING

The camera is shipped as a camera only or as a kit. Unpack and inspect the contents carefully.

Camera Kit Camera Only

1 Camera 1 Camera
1 Camera bracket
1 Camera bracket base
1 Cable

Pelco Manual C1969M-A (1/02) 3