Pelco 12FA4.5C, 13FA8, 12FA6C, 12FA12C, 13FA2.3 User Manual

...
0 (0)
Pelco 12FA4.5C, 13FA8, 12FA6C, 12FA12C, 13FA2.3 User Manual

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

Five years on FT/FR8000 Series fiber optic products.

Three years on Genex® Series products (multiplexers, server, and keyboard).

Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models, which have a five-year warranty.

Two years on standard motorized or fixed focal length lenses.

Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products.

Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in continuous motion applications.

Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).

Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and EnduraSeries distributed network-based video products.

One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.

Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1.Model and serial number

2.Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3.Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate address below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:

Service Department

Pelco

3500 Pelco Way

Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the following:

If the goods are to be sent by a COURIER SERVICE, send the goods to:

If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:

Pelco

Pelco c/o Expeditors

3500 Pelco Way

473 Eccles Avenue

Clovis, CA 93612-5699 USA

South San Francisco, CA 94080 USA

 

Phone: 650-737-1700

 

Fax: 650-737-0933

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA www.pelco.com

In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150

® Pelco and the Pelco logo are registered trademarks of Pelco. • © Copyright 1999, Pelco. All rights reserved.

C747M (5/99)

Fixed Focal

Length Lenses

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Servicing should only be done by qualified service personnel.

2.Only use replacement parts recommended by Pelco.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

DESCRIPTION

Lenses in the fixed focal length category offer a selection of imager format optics in various focal lengths.

The 1/2-inch imager format lenses are available in both C- and CS-type mounts, depending upon the model used, while the 2/3-inch lenses are available in C-type mounts only. A 5-mm spacer (commonly referred to as a C/CS-mount adapter and available from Pelco as the PCMA40 lens adapter) may be used to make a C-type lens compatible to a CS-type camera.

However, CS-type lenses are not compatible to C-mount cameras. The CS lenses require fewer glass elements to focus at a shorter distance, while not affecting picture quality. The entire series of 1/3-inch imager format lenses come with CS-type mounts.

All fixed focal length lenses feature high-resolution power in a compact body.

The FA series fixed focal length lenses have a manual iris and manual focus.

The FD series fixed focal length lenses have a direct-drive auto iris and manual focus, while the FV series have a video-drive auto iris. Both the FD and FV series have an industrystandard square four-pin connector that plugs directly into the camera receptacle. In addition, all auto-iris lenses include a spot filter.

MODELS

 

 

 

Fixed focal length lenses with manual iris and manual focus.

 

12FA3.5C

13FA2.3

23FA8

 

12FA4.5C

13FA2.8

23FA12

 

12FA6C

13FA4

23FA16

 

12FA12C

13FA8

23FA25

 

Suffix “C” indicates 1/2-inch lenses having a C-type mount.

 

Fixed focal length lenses with direct-drive auto iris and manual focus.

13FD2.3 (CE)

13FD4 (CE)

 

 

13FD2.8 (CE)

13FD8 (CE)

 

 

Fixed focal length lenses with video-drive auto iris and manual focus.

12FV3.5 (CE)

12FV6 (CE)

13FV2.3 (CE)

23FV8 (CE)

12FV4C (CE)

12FV6C (CE)

13FV2.8 (CE)

23FV12 (CE)

12FV4.5 (CE)

12FV12 (CE)

13FV4 (CE)

23FV16 (CE)

12FV4.5C (CE)

12FV12C (CE)

13FV8 (CE)

23FV25 (CE)

Suffix “C” indicates 1/2-inch lenses having a C-type mount.

Loading...
+ 1 hidden pages