PEERLESS PLS-65F25AL04-04 User Manual [ru]

0 (0)

Revision:3 | Date: 2014-10-11

Full Range

This 2.5 inch 4 ohm member of the PLS family sets a high standard for compact full range drivers intended for applications such as television soundbars and compact music systems. Design features in this family include a stiff steel basket with venting under the spider to aid cooling of the motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low frequencies and extended high frequency response. A black anodized aluminium cone is employed, along with a black anodized aluminium dust cap coupled directly to the voice coil. Additionally, the cones come equipped with special-designed large roll rubber surrounds, which allow for a dynamic linear response at high excursion.

MECHANICAL 2D DRAWING

PLS-65F25AL04-04

SPECIFICATIONS

DC Resistance	Revc	Ω	3.61	±5.0%	Moving Mass	Mms	g	2
Minimum Impedance	Zmin	Ω	4.33	±7.5%	Suspension Compliance	Cms	um/N	864
Voice Coil Inductance	Le	mH	0.03	–	Effective Cone Diameter	D	cm	5.2
Resonant Frequency	fs	Hz	120.6	15%	Effective Piston Area	Sd	cm2	21.2
Mechanical Q Factor	Qms	–	4.14	–	Equivalent Volume	Vas	L	0.55
Electrical Q Factor	Qes	–	0.82	–	Motor Force Factor	BL	T•m	2.53
Total Q Factor	Qts	–	0.69	–	Motor Efficiency Factor	β	(T•m2)/Ω	1.8
Ratio	fs/Qts	–	176.05	–	Voice Coil Former Material	VCfm	–	ASV
Half Space Sensitivity	dB@2.83V/1m	dB	85.59	±1.01	Voice Coil Inner Diameter	VCd	mm	25.73
Sensitivity	1W/1m	dB	82.9	±1.01	Gap Height	Gh	mm	3
Rated Noise Power (IEC 268-5 18.1)	P	W	25	–	Maximum Linear Excursion	Xmax	mm	1.7
Test Spectrum Bandwidth		12 dB/Oct	100Hz~20KHz	–	Ferrofluid Type	FF	–
Energy Bandwidth Product	EBP	(1/Qes)•fs		–	Transducer Size	–	–	2.5 in
				–	Transducer Mass	–	Kg	0.34

FREQUENCY & IMPEDANCE RESPONSE