KIL540, KIL540-S, KIL540-EUK,
KIL542, KIL542-S, KIL542-EUK,
KIL546, KIL546-S, KIL546-EUK,
KIL547, KIL547-S, KIL547-EUK,
KIL555, KIL555-S, KIL555-EUK
ENG
1 |
2014-20-03 #:150-9017-2 06-04-14 |
WARNING
ENG - Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. To reduce the risk of electric shock or fire, do not expose product to water or moisture. Be sure power cord is routed so that it will not be tripped on, stepped on, or pinched by heavy items. Avoid overloading electrical outlets or extension cords. Always disconnect the power cord from the power outlet when installing, servicing, or not using the product for an extended period of time. Do not block ventilation slots or fan exhaust on product. Blocking airflow could damage product. Arrange product to allow air to flow freely around product. Keep product away from direct sunlight or any source of heat. For support please call 800-4-SIGNAGE.
ENG Symbols
ENG Do not overtighten screws.
ENG Two person lift. |
ENG WARNING
#
ENG Skip to step.
x3 |
ENG Screws must get at least three full turns and fit snug.
ENG Tools Needed for Assembly.
2 |
2014-20-03 #:150-9017-2 06-04-14 |
ENG Parts (Before beginning, make sure you have all parts shown below).
Parts List |
|
KIL540-S |
KIL542-S |
KIL546-S |
KIL547-S |
KIL555-S |
|
|
|
|
KIL540 |
KIL542 |
KIL546 |
KIL547 |
KIL555 |
|
Description |
Qty |
KIL540-EUK KIL542-EUK KIL546-EUK |
KIL547-EUK |
KIL555-EUK |
||
|
Part # |
Part # |
Part # |
Part # |
Part # |
||
|
|
|
|||||
A |
kiosk BLK |
1 |
150-P1169 |
150-P1170 |
150-P1171 |
150-P1172 |
150-P1172 |
|
kiosk SLV |
|
150-4169 |
150-4170 |
150-4171 |
150-4172 |
150-4172 |
B |
M5 x 12mm Pan Phl |
4 |
520-1027 |
520-1027 |
520-1027 |
520-1027 |
520-1027 |
|
screw |
|
|
|
|
|
|
C |
M5 X 25mm Pan Phl |
4 |
520-9543 |
520-9543 |
520-9543 |
520-9543 |
520-9543 |
|
screw |
|
|
|
|
|
|
D |
M6 x 12mm Pan Phl |
4 |
520-1128 |
520-1128 |
520-1128 |
520-1128 |
520-1128 |
|
screw |
|
|
|
|
|
|
E |
M6 x 25mm Pan Phl |
4 |
520-1208 |
520-1208 |
520-1208 |
520-1208 |
520-1208 |
|
screw |
|
|
|
|
|
|
F |
M8 x 12mm Pan Phl |
4 |
520-9571 |
520-9571 |
520-9571 |
520-9571 |
520-9571 |
|
screw |
|
|
|
|
|
|
G |
M8 x 25mm Pan Phl |
4 |
520-1031 |
520-1031 |
520-1031 |
520-1031 |
520-1031 |
|
screw |
|
|
|
|
|
|
H |
M5/M4/M6 multi washer |
4 |
580-1398 |
580-1398 |
580-1398 |
580-1398 |
580-1398 |
I |
1/4"spacer |
4 |
540-1059 |
540-1059 |
540-1059 |
540-1059 |
540-1059 |
J |
key |
2 |
565-0049A |
565-0049A |
565-0049A |
565-0049A |
565-0049A |
K |
6x1 wrench |
1 |
560-9646 |
560-9646 |
560-9646 |
560-9646 |
560-9646 |
A (1) |
B (4) |
C (4) |
kiosk |
M5 x 12 mm |
M5 x 25 mm |
|
D (4) |
E (4) |
|
M6 x 12 mm |
M6 x 25 mm |
|
F (4) |
G (4) |
|
M8 x 12 mm |
M8 x 25 mm |
H (4) |
I (4) |
M5/M4/M6 washer |
spacer |
K (1) |
J (2) |
6x1 wrench |
key |
3 |
2014-20-03 #:150-9017-2 06-04-14 |
1 |
J (2) |
4 |
2014-20-03 #:150-9017-2 06-04-14 |
2
3
K
5 |
2014-20-03 #:150-9017-2 06-04-14 |