Peerless Industries PRS 40, PRS 45-W, PRS 45-S, PRS 35, PRS 45 User Manual

...
0 (0)
Peerless Industries PRS 40, PRS 45-W, PRS 45-S, PRS 35, PRS 45 User Manual

page 1 of 2

TECHNICAL DATA SHEET - PRS Series Clamp-Style Universal Projector Mount

MODELS: PRS 35, PRS 35-S, PRS 35-W, PRS 40, PRS 40-S, PRS 40-W, PRS 45, PRS 45-S, PRS 45-W

R

The PRS Series Clamp-Style Universal Projector Mount is the most low profile universal mount available today. It offers a quick and easy installation in addition to unmatched versatility. The mount ships preassembled, can be attached to any common ceiling structure, and is offered in multiple colors to complement any setting.

Features:

+5°/-20° Pitch, +/-10° Roll, 360° Yaw (when attached to an extension column), +/-15° Yaw (when flush mounted), which enables the image to be perfectly aligned with the screen

Mount completely pre-assembled to save you time

Independent roll, pitch, and yaw adjustments provide easy image alignment

Can be mounted directly to a single wood beam or concrete slab without disassembling the mount and without reinforcing the ceiling

Can attach to 1 1/2" extension column, 3/4" extension column, or 3/8" threadedrod

Armor Locksecurity screws pre-installed for a secure installation in minutes

Quickly release the projector for maintenance with the simple turn of a knob

Built in cord management access hole provides complete access to route cords through extension column to keep cords hidden

4 adjustment points allow a quick, simple installation

Final security lock down is optional to use

Easily and quickly attaches to clamp-style universal adapter plate

Universal clamp designed to hold projectors either inverted or upright

Ideal for projectors that do not have mounting holes or cannot be inverted

Large side openings in clamp provide access to projector ports*

Offered in black, white, and silver to complement any setting

Low profile allows the projector to be close to the ceiling

Offers the fastest installation to reduce installation time and costs

*It is the responsibility of the installer to check the vents and ports on the projector to ensure that they are not obstructed by the universal mount. Blocked vents may cause damage to the projector.

PRS SERIES

PROJECTOR

MOUNT

Accessories:

Ceiling Plates (various models available)

Cord Wrap (ACC 852, 852S, 852W)

Fixed and Adjustable length Extension Columns, 1 1/2" NPT (“EXT” or “ADJ” models)

Fixed length Extension Columns, 3/4" NPT (“FLP” models)

Armor Lock Plussecurity cable with Lock (ACC020)

Armor Lock Plus security cable (ACC 021)

Side to Side Adjuster (ACC 830)

Dimensions:

For product dimensions, see page 2.

A R C H I T E C T S S P E C I F I C A T I O N S

The PRS Series Clamp-Style Universal Projector Mount shall be a Peerless model and shall be located where indicated on the plans. It

shall feature 25°(+5°/-20°) pitch, 20°(+10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the projector. It shall be constructed of aluminum alloy finished in black, white, or silver. Assembly and installation shall be done according to instructions provided by the manufacturer.

Peerless Industries, Inc.

3215 W. North Ave. Melrose Park, IL 60160

708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com

ISSUED: 1-26-04 SHEET NO: 055-9819-1

© 2004 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark and Armor Lock and Armor Lock Plus are trademarks of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Loading...
+ 1 hidden pages