PCE Instruments PCE-VE 320HR, PCE-VE 333HR, PCE-VE 350N3, PCE-VE 330N, PCE-VE 350HR User Manual
...
Manual
Videoscope PCE-VE 3xxN Series
Version 2.1
Date of creation: 21.04.2016
Date of last change: 05.05.2017
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@industrial-needs.com
Manual
2
Contents
1 Safety notes......................................................................................................................................... 3
2 Specifications...................................................................................................................................... 4
2.1 Technical specifications ............................................................................................................................. 4
2.2 Delivery contents ....................................................................................................................................... 5
3 System description ............................................................................................................................. 5
4 Getting started .................................................................................................................................... 6
5 Operation ............................................................................................................................................. 6
5.1 Take a picture ............................................................................................................................................ 6
5.2 Record a video ........................................................................................................................................... 6
5.3 View data ................................................................................................................................................... 6
5.4 Settings ...................................................................................................................................................... 7
6 HR camera cable (PCE-VE 3xxHR or optional) ................................................................................ 8
6.1 Safety notes ............................................................................................................................................... 8
6.2 Technical specifications ............................................................................................................................. 9
6.3 System description .................................................................................................................................. 10
6.4 Getting started ......................................................................................................................................... 11
6.5 Operation ................................................................................................................................................. 12
7 Articulating camera cable (PCE-VE 350N / HR / N3 / HR3 only or optional) ................................... 14
7.1 Safety notes ............................................................................................................................................. 14
7.2 System description .................................................................................................................................. 15
7.3 Getting started ......................................................................................................................................... 15
7.4 Operation ................................................................................................................................................. 16
8 HR camera cable with 360° articulating camera head (PCE-VE 370HR3 or optional) .................. 17
8.1 Safety notes ............................................................................................................................................. 17
8.2 Technical specifications ........................................................................................................................... 17
8.3 System description .................................................................................................................................. 17
8.4 Getting started ......................................................................................................................................... 17
8.5 Operation ................................................................................................................................................. 19
9 PCE-VE 380N ..................................................................................................................................... 21
9.1 Safety notes ............................................................................................................................................. 21
9.2 Technical specifications ........................................................................................................................... 21
9.3 System description .................................................................................................................................. 22
9.4 Getting started ......................................................................................................................................... 23
9.5 Operation ................................................................................................................................................. 25
10 PCE-VE 390N ..................................................................................................................................... 28
10.1 Safety instructions ................................................................................................................................... 28
10.2 Technical specifications ........................................................................................................................... 28
10.3 System description .................................................................................................................................. 29
10.4 Getting started ......................................................................................................................................... 29
11 Disposal ............................................................................................................................................. 31
12 Contact ............................................................................................................................................... 31
12.1 PCE Instruments UK ................................................................................................................................ 31
12.2 PCE Americas ......................................................................................................................................... 31
Manual
3
Thank you for purchasing a video endoscope from PCE Instruments.
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
This device may only be used in the way specified in this manual. If used otherwise, this may
cause dangerous situations.
Do not expose the device to extreme temperatures, direct sunlight, extreme air humidity or
moisture.
The case should only be opened by qualified personnel of PCE Instruments.
Do not touch the instrument with wet hands.
Do not expose the device to shocks or strong vibrations.
You should not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner without
solvents or abrasives.
The device must only be used with original PCE accessories or equivalent.
Before each use, please inspect the case for damage. In case of any visible damage, please do
not use the device.
The device must not be used be used when the environmental conditions (temperature, air
humidity,…) are outside the limit values stated in the specifications.
Do not expose the instrument to explosive atmospheres.
Do not use the endoscope near uninsulated current-carrying conductors.
The instrument should never be placed with the user interface facing an object (e. g. keyboard
side on a table).
This product has been produced for industrial use only. Do not use it for medical or any other
biological purposes.
This user's handbook is published by PCE Instruments without any guarantee.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
Manual
4
2 Specifications
2.1 Technical specifications
General specifications
Sensor
CMOS
Resolution videos / pictures
640 x 480
Frame rate
30 fps
Lighting
Automatic
White balance
Fixed
Field of view
67 °
PCE-VE 380N / PCE-VE 390N: 150.8 °
Depth of field
1.5 … 10 cm
PCE-VE 380N / PCE-VE 390N:10 … mm
Bending radius
90 mm
PCE-VE 380N / PCE-VE 390N: Ø 30 cm
Display
3.5 “ (88.9 mm) TFT display
Interface
Mini-USB 1.1
AV out
Memory
8 GB SD card
Compression format
MPEG4
Video format
ASF
Video output system
NTSC / PAL
Picture format
JPEG
Power supply
Rechargeable 3.7 V Li-ion battery
Environmental conditions
0 … +60 °C
PCE-VE 350N: -10 … +50 °C
PCE-VE 380N: -10 … +60 °C
Weight
450 g (incl. carrying case)
Camera cable specifications
Model
Cable
length
Cable type
Cable Ø
Boost
function*
Lighting
PCE-VE 320N
1000 mm
Semi-flexible
5.5 mm
No
4 LEDs
PCE-VE 320HR
1000 mm
Semi-flexible
5.5 mm
Yes
4 LEDs on the front
2 LEDs on the side
PCE-VE 330N
2000 mm
Semi-flexible
5.5 mm
No
4 LEDs
PCE-VE 333HR
3000 mm
Semi-flexible
5.5 mm
Yes
4 LEDs on the front
2 LEDs on the side
PCE-VE 340N
10000 mm
Flexible
5.5 mm
No
4 LEDs
PCE-VE 350N
1000 mm
Flexible
6.0 mm
No
4 LEDs
PCE-VE 350N3
3000 mm
Flexible
6.0 mm
No
4 LEDs
PCE-VE 350HR
1000 mm
Flexible
6.0 mm
Yes
4 LEDs on the front
2 LEDs on the side
PCE-VE 350HR3
3000 mm
Flexible
6.0 mm
Yes
4 LEDs on the front
2 LEDs on the side
PCE-VE 360N
1000 mm
Semi-flexible
3.9 mm
No
3 LEDs
PCE-VE 370HR
1000 mm
Semi-flexible
6.0 mm
Yes
4 LEDs on the front
2 LEDs on the side
PCE-VE 370HR3
3000 mm
Flexible
6.0 mm
Yes
4 LEDs on the front
2 LEDs on the side
PCE-VE 380N
30000 mm
Semi-flexible
28 mm
No
8 LEDs
PCE-VE 390N
10000 mm
Semi-flexible
28 mm
No
8 LEDs
*The boost function improves the quality of pictures and videos in dark environments.
Manual
5
2.2 Delivery contents
1 x endoscope PCE-VE 3xxN or HR (one of the models)
1 x 8 GB SD card
1 x USB cable
1 x mains adaptor
1 x carrying case (PCE-VE 390 N: + carrying belts)
1 x instruction manual
3 System description
Function keys
A power button
B photo button
C video button
D up button ▲
E down button ▼
F OK button OK
G escape button ESC
H illumination switch
I SD card slot
J AV out
K USB interface
L mains connection
M Display
N camera cable/tube
O reset button
Manual
6
4 Getting started
Connect the camera cable to the display unit and screw it tightly. Make sure that the indication on the
connector is on the upper side (see picture above).
After that, press and hold the power button for approx. 5 seconds to turn on the device.
Now the display shows the following:
SD card capacity
Battery status
To turn off the device, press and hold the power button for 3 to 5 seconds.
5 Operation
5.1 Take a picture
To take a picture of the current image on the display, simply press the photo button .
The picture is stored on the SD card. After saving the picture, the device returns to the standard viewing
mode.
You can press the escape button ESC to zoom in (2x digital zoom).
If you press and hold the escape button ESC for a few seconds, the image on the screens gets mirrored.
5.2 Record a video
To start recording a video, press the video button . An indication appears on the display showing that
video recording is in progress. Press the video button again to stop the recording. The video is stored
on the SD card automatically.
You can press the escape button ESC to zoom in (2x digital zoom).
If you press and hold the escape button ESC for a few seconds, the image on the screens gets mirrored.
5.3 View data
To view the stored pictures and videos, press the up ▲ or down ▼button in standard viewing mode. Now
you can use these buttons to navigate through all pictures and videos. The data is sorted by date of
recording.
To delete a file, select it and press the OK button. A confirmation window appears on the display. Use the
up ▲ or down ▼button to choose “Yes” if you want to delete the file or choose “No” to cancel. After
selecting the desired option, press the OK button to confirm.
Manual
7
5.4 Settings
Press the OK button in standard viewing mode to enter the settings menu. Here you have the following
options:
DELETE ALL FILES
AV OUTPUT
DATE / TIME
LANGUAGE
TV SYSTEM
AUTO POWER OFF
Reset
To set the device back to factory default settings, press the reset button on the back of the device.
Delete all files
To delete all files, select the “DELETE ALL FILES” option in the settings and press the OK button. After
that, use the up ▲ and down ▼ button to select “Yes” if you want to delete all files or select “No” to
cancel. After selecting the desired option, press the OK button to confirm.
AV output
Connect the AV out to an external display unit, choose the “AV OUTPUT” option and press the OK
button. The display of the endoscope turns black and the image is shown on the external display unit. To
exit this mode, press the OK button again.
Date / Time
To adjust the time and date settings, select the “DATE / TIME” option and press the OK button. Now you
can use the up ▲ and down ▼ button to move between the parameters year, month and day, as well as
hours, minutes and seconds. Move to the desired parameter and use the photo and video button
to adjust the value.
If you want the date and time to be displayed on each picture and video, move to the “Display” option and
choose “Yes”. Choose “no” if you do not want date and time to be shown on each picture and video.
Language
To change the language of the device, select the “LANGUAGE” option and press the OK button. Now you
are in the language selection screen. Use the up ▲ and down ▼ button to select the desired language
and press the OK button to confirm.
TV system
To change the TV system / video output format, select the “TV SYSTEM” option and press the OK button.
Here you can choose between “PAL” and “NTSC”. Use the up ▲ and down ▼ button to select the
desired option and press the OK button to confirm.
Auto power off
To adjust the auto power off settings, select the “AUTO POWER OFF” option and press the OK button.
Now you can choose between different time settings. Select the desired option by using the up ▲ and
down ▼ button and press the OK button to confirm.
Manual
8
6 HR camera cable (PCE-VE 3xxHR or optional)
6.1 Safety notes
In addition to the general safety notes of the PCE-VE 3xxN device, please mind the following safety notes
to prevent damage and injuries when using the HR camera cable.
To avoid dangerous situations, make sure that the probe does not get in touch with
inflammable liquids or gases.
The HR cable includes various small cables which control the optics and electronics of the
camera tip. To ensure high reliability, do not bend the cable to an angle of more than 90 ° and
store the cable as little bent as possible.
Do not disassemble the device as this can cause damage and electric shocks.
Do not expose the device to direct sunlight and store it in a cool, dry, sufficiently ventilated
place.
To protect the camera module, make sure the protection ring is on the camera head as long as
no accessories are in use.
Do not apply force to the end of the cable and
do not bend it. This can deteriorate your vision
and even damage the probe.
When you roll up the cable, the inner diameter
must be at least 15 cm.
Put the protection ring back on and tighten it
when not using the device for a longer period of
time.
Manual
9
Do not crash the probe head.
Make sure that the camera does not get in
contact with the following liquids:
lead-free petrol, diesel oil, machine oil, brake
fluid, transmission oil and water.
Do not screw the accessories on too tightly.
Only screw it slightly until it is fixed.
To clean the camera head, use the
cleaning liquid and the swabs provided in
the cleaning kit.
6.2 Technical specifications
Length of camera head
20 mm
Diameter with protection ring
6 mm
Depth of field
10 … 60 mm
Field of view
60.7 °
Protection class
IP67
Manual
10
6.3 System description
1. Probe: to guide the camera
2. Camera head: for illumination and capturing
3. Assembly ring: to attach accessories
4. Protection ring: to protect the thread
5. Red cap: protects the camera when not in use
6. Boost key: for better illumination in dark environments
7. Rotation key: Press once to turn the display counter-clockwise by 90 °. The red LED will light up.
The LED will stop glowing when the original position has been reached.
8. Light key: This key activates a mirror which enables particle-free vision.
9. Connector
Manual
11
6.4 Getting started
Connection
Step 1: Connect the main unit with the connector and fix it with the screw mechanism.
Step 2: Switch on the system. You should now see a picture in the display.
Attachment of the accessories
Mirror
Step 1: Unscrew the thread protection ring.
Step 2: Screw the assembly ring down to the bottom.
Step 3: Screw the mirror attachment onto the thread until the thread is completely covered.
Step 4: Align the lateral LED opening of the mirror attachment in a way that the LEDs are uncovered.
Step 5: Turn the assembly ring upwards in order to fix the mirror attachment.
Step 6: Press the light key to activate the lateral light.
Step 7: Adjust the light intensity as required to ensure ideal vision to the side.
(Steps 4-5 must be repeated until the right position is reached)
Manual
12
Magnetic hook
Step 1: Turn the assembly ring down to the bottom.
Step 2: Screw the magnetic hook on until it snaps in.
Climbing ball
Step 1: Remove the assembly ring.
Step 2: Screw the climbing ball on until it snaps in.
6.5 Operation
Boost key
Use this key in a dark environment. The red LED indicates that the Boost function has been activated.
The image will be lightened up.
Note: Hold the probe steady.
Before “boosting”
After “boosting”
Manual
13
Rotation key
You can use this key to turn the image by 90 ° four times, for instance, when trying to read an inscription
completely.
Light key
When using the mirror attachment, this key improves the vision which will not be impeded by particles,
dust, etc.
Without “particle free” function
With “particle free” function
Manual
14
7 Articulating camera cable (PCE-VE 350N / HR / N3 / HR3 only or optional)
7.1 Safety notes
In addition to the general safety notes of the PCE-VE 3xxN device, please mind the following safety notes
to prevent damage and injuries when using the pivoting camera head.
Do not bend the pivoting camera head by hand. Only use the rotary switch to adjust the angle.
Do not try to rotate the rotary switch any further when it has already been rotated all the way to
the stop.
Do not expose the device to extreme temperatures, direct sunlight, extreme air humidity or
moisture. Only use the pivoting camera head at temperatures between 0 and +55 °C.
If you coil up the camera cable for storing, make sure the diameter is at least 15 cm and that the
camera head is in a straight position.
Do not expose the camera head to mechanical strains and stresses.
Manual
15
7.2 System description
1. Camera cable
2. Camera head
3. Gooseneck
4. Operating unit
5. Rotary switch for gooseneck
6. Connecting cable
7. Connector
8. Locking lever
7.3 Getting started
Connect the connecting cable to the display unit of the endoscope and screw it tightly. Make sure that the
indication on the connector is on the upper side.
Manual
16
7.4 Operation
1. By using the rotary switch, you can pivot the camera head. Turn the switch in a clockwise motion
to pivot the camera head to the right or in a counter-clockwise motion to pivot the camera head to
the left.
2. You can lock the pivoting angle of the camera head by using the red locking lever. To lock the
camera head, carefully push the lever clockwise all the way to the stop. To unlock the camera
head carefully push the lever counter-clockwise, until it reaches its starting point.
Manual
17
8 HR camera cable with 360° articulating camera head (PCE-VE 370HR3 or
optional)
8.1 Safety notes
In addition to the general safety notes of the PCE-VE 3xxN device, please mind the following safety notes
to prevent damage and injuries when using the HR camera cable with 360° articulating camera head.
To avoid dangerous situations, make sure that the probe does not get in touch with
inflammable liquids or gases.
Do not disassemble the device as this can cause damage and electric shocks.
To protect the camera module, make sure the protection ring is on the camera head as long as
no accessories are in use.
Do not bend the articulating camera head by hand. Only use the joystick to adjust the angle.
Do not expose the device to extreme temperatures, direct sunlight, extreme air humidity or
moisture. Only use the device at temperatures between 0 and +60 °C. Store it in a cool, dry,
sufficiently ventilated place.
If you coil up the camera cable for storing, make sure the diameter is at least 15 cm and that
the camera head is in a straight position.
Do not expose the camera head to mechanical strains and stresses.
8.2 Technical specifications
Camera head diameter
6 mm
Camera cable
Length: 3 m; water proof
Swivel mechanism
Camera head can be swivelled by 110° in all
directions
Illumination
LEDs on the front and on the side
Operating and storing temperature
0 … +60 °C
Weight
800 g
8.3 System description
1. Joystick
2. Rotation key
3. Light key
4. Boost key
8.4 Getting started
Attachment of the accessories
Manual
18
Mirror
Step 1: Unscrew the thread protection ring.
Step 2: Screw the assembly ring down to the bottom.
Step 3: Screw the mirror attachment onto the thread until the thread is completely covered.
Step 4: Align the lateral LED opening of the mirror attachment in a way that the LEDs are uncovered.
Step 5: Turn the assembly ring upwards in order to fix the mirror attachment.
Step 6: Press the light key to activate the lateral light.
(Steps 4-5 must be repeated until the right position is reached)
Manual
19
8.5 Operation
Hold the device with one hand and use your thumb for operating the joystick and the function keys. With
your index finger, you can use the boost key.
Use the joystick to adjust the swivelling angle and direction of the camera head.
Boost key
Use this key in dark environments to lighten up the image.
Note: Hold the camera cable steady to get a clear image.
before “boosting” after “boosting”
Manual
20
Rotation key
Use this key to rotate the image by 90 °, for instance, when trying to read an inscription completely.
Light key
Use this key in combination with the mirror attachment to improve the vision which will not be impeded by
particles, dust, etc.
without “particle free” function with “particle free” function
Manual
21
9 PCE-VE 380N
9.1 Safety notes
In addition to the general safety notes of the PCE-VE 3xxN device, please mind the following safety notes
to prevent damage and injuries when using the camera cable and the accessories of the PCE-VE 380N.
When rolling the camera cable out or in, be very careful to prevent mechanical damage due to
tensile or compressive strain.
You can move the camera cable around corners from 90° upwards. If the corner is narrower than
90°, this might interfere your measurement and even cause damage to the product.
Do not use the camera cable to inspect fuel tanks or other environments with explosive or
inflammable atmospheres.
To clean the whole set, wash it with water and dry it with a cloth or let it dry. Do not sluice it with a
hose or a high-pressure cleaner.
Do not expose the device to direct sunlight and store it in a cool, dry, sufficiently ventilated place.
9.2 Technical specifications
Cable drum
Diameter
300 mm
Operating temperature
-10 … +60 °C
Weight
3.5 kg
Cable
Diameter
6 mm
Length
30 m
Bending radius
150 mm
Weight
100 g/m
Camera head
Camera diameter
28 mm
Camera length
24.3 mm
Depth of field
10 mm … ∞
Field of view
150.8 ° (diagonal)
Lighting
8 LEDs (white)
Operating temperature
-10 … +60 °C
Fitting pipe diameters
Ø 40 … 100 mm
Cable measuring device
Measuring units
m / ft
Counting
Forward / backward
Accuracy
±0.4 m (±1.3 ft)
Display
3 digits (1 decimal place)
Protection class
IP 55
Power supply
2 x 1.5 V AAA batteries
Battery life
≥ 90 hours
Dimensions
62 x 110 x 24 mm
Manual
22
9.3 System description
PCE-VE 380N
1. Connection to display unit
2. Support for display unit
3. Handle
4. Camera head
5. Support for camera head
6. Cable measuring device
7. No function
Cable measuring device
1. ON/OFF/RESET button
2. m/ft button
3. Display backlight button
4. Battery compartment
Manual
23
Camera cable
1. Camera head
2. Semi-flexible camera cable
3. Connection
4. Camera cable
5. Mounting ring
9.4 Getting started
Battery replacement
Transmitting unit
The battery compartment of the transmitting unit is located at the back of the unit. To open it, you have to
loosen a screw first. After that, you can open the battery compartment and replace the batteries.
Manual
24
Cable measuring device
The battery compartment of the cable measuring device is located at the front, right below the function
keys. To open it, you have to loosen a screw first. After that, you can open the battery compartment and
replace the batteries.
Installation
1. Place the display unit in the support.
2. Connect the camera cable to the display unit and screw it tightly.
You can adjust the angle of the display support at any time, but do not use angles smaller than 90° cause
this might damage the support.
Manual
25
The PCE-VE 380N can also be used in horizontal position.
9.5 Operation
Pulling out the cable
1. Before pulling out the camera cable, loosen the cable drum fixing first.
2. Pull out the camera cable horizontally. Do not pull it out in an angle larger than 45° to the
camera head support.
Manual
26
3. Once you have reached the desired cable length, fix the cable drum to prevent it from rolling
out any further.
Coiling up the cable
1. Hold the camera head horizontally and carefully coil up the cable.
2. When the camera cable is coiled up completely, place the camera head in the camera head
support.
4. Fix the cable drum to prevent the cable from rolling out.
Manual
27
Cable measuring device
To turn on the device, press and hold the OF/OFF button for 3 seconds.
You can reset/restart the device at any time by pressing and holding the ON/OFF button for 1 second.
To switch the measuring unit between m and ft, press the “m/ft” button.
Press the backlight button to activate the display backlight. The display backlight is active for 10
seconds.
To turn off the device, press and hold the ON/OFF button for 3 seconds.
The device also has an automatic power-off function which turns it off automatically after 1 hour of idling
time.
If the display shows a battery indication , please replace the batteries.
Centring star
1. Put the camera head in the centring star attachment and align the mounting ring with the screw
holes.
2. Put the screws in the screw holes and fasten the camera head.
Screw hole
Manual
28
Cleaning
1. Remove the display unit from the support.
2. Put the protecting hood on the connector of the camera cable.
3. Wash the cable drum with water and let it dry for a few minutes.
4. If necessary, dry the cable drum with a dry cloth before putting it back into the carrying case.
10 PCE-VE 390N
10.1 Safety instructions
Do not use the camera cable to inspect fuel tanks or other environments with explosive or
inflammable atmospheres.
When bending or rolling up the camera tube make sure that the bending diameter is more than
30 cm. Otherwise it can cause damage to the tube.
Pay attention when pushing the camera tube in the object to be inspected or when pulling it back
out. The camera tube is a high-strength structure which can be used for pushing obstacles in
pipes. However, due to its rigidity, it might unwind from the carrying system when pulling it out.
Do not expose the device to direct sunlight and store it in a cool, dry, sufficiently ventilated place.
The display unit is not waterproof. Remove the display unit and the connector before cleaning the
camera tube and the carrying system.
10.2 Technical specifications
Carrying system
Dimensions
490 x 450 x 60 mm
Weight
1222 g (without display unit and camera tube)
Camera tube
Length
10 m
Diameter
6 mm
Bending diameter
30 cm
Weight
100 g / meter
Camera head
Diameter
28 mm
Length
24.3 mm
Depth of field
10 mm … ∞
Field of view
150.8 °
Illumination
8 LEDs (white)
Environmental temperature
-10 … +70 °C
Protection class
IP 68 (10 m)
Pipe diameter
Ø 40 mm … Ø 100 mm
Manual
29
10.3 System description
Carrying system
1. Neck strap
2. Carrying system
3. Hip belt
10.4 Getting started
Inserting the display unit
Insert the display unit into the carrying system as seen in the picture above.
Use the connecting cable to connect the display unit to the camera tube,
Roll up the camera tube on the carrying system.
Manual
30
Attaching and wearing the carrying straps
Step 1 / 2:
Attach the neck strap to one of the upper supports, put it around your neck and attach the other
end to the other upper support of the carrying system.
Attach the hip belt to one of the lower supports, put it around your hip and attach the other end to
the other lower support of the carrying system.
Step 3:
Turn on the device.
Step 4:
Unwind the camera tube until you have reached the desired length.
Manual
31
11 Disposal
For the disposal of batteries, the 2006/66/EC directive of the European Parliament applies. Due to the
contained pollutants, batteries must not be disposed of as household waste. They must be given to
collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or
give them to a recycling company which disposes of the devices in line with law.
If you have any questions, please contact PCE Instruments.
12 Contact
If you have any questions about our range of products or measuring instruments please contact PCE
Instruments.
12.1 PCE Instruments UK
By post:
PCE Instruments UK Ltd.
Units 12/13 Southpoint Business Park
Ensign Way, Southampton
Hampshire
United Kingdom, SO31 4RF
By phone:
02380 987 035
12.2 PCE Americas
By post:
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
33458 FL
USA
By phone:
561 3209162
Loading...