Paxton Net2 User Manual
12V
Port 1Port 2Port 3Port 4
Port 5
12V
0V
Power
Ethernet
PoE 1
PoE 2
PoE 3
PoE 4
Power over Ethernet IEEE 802.3af
PoE Extension switch
INPUT AC 100-240V
50 / 60 Hz
1.2A
OUTPUT DC 13.8V 2A
23/07/2012
Ins-30203 Net2 Entry - Extension switch
Paxton
Technical Support
01273 811011 support@paxton.co.uk
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Description of product
The Net2 Entry extension switch allows more monitors to be connected to the Net2 Entry system. It is connected
to the system using one of its network ports and communicates using IPv6.
1
2
3
4
Paxton recommend that the network cable is run
to each location and terminated in a network box.
A patch cable should then be used to link the unit
to the network. This makes unit replacement or
removal for building maintenance much easier.
1. PoE Switch ( 4 PoE + 1 standard port )
2. 2A 12V DC power supply
3. Battery backup ( not supplied )
4. Plastic cabinet
Installation
This extension switch should be used in conjunction with a Net2 Entry control unit(s) and other PoE switches as
required to provide the power and network connections for the Net2 Entry devices.
Power up the extension switch.
The Net2 Entry units will power up using the PoE provided by the extension switch.
See also: AN1127 - Net2 Entry - Planning and installation < http://paxton.info/1896 >
Specications
Dimensions
Electrical
PSU output voltage
PSU output current
Features
PoE network ports
Standard network ports
Environment
Operating temperature
IP Rating
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to the standard EN55022, when using UTP (unshielded twisted pair) category cable. In order
to comply with the limits for a Class B digital device it is necessary to use FTP (foiled twisted pair) or
STP (shielded twisted pair) category cable on the PoE/network ports.
Width
236 mm 320 mm 80 mm
Min
Min
Min
0 °C 45 °C
Height
Max
12v DC
2A
Max
4
1
Max
Depth
IEEE 802.3af
Indoor use only
Loading...