Paxar 9800 User Manual

0 (0)
Paxar 9800 User Manual

Monarch

9800 Series

Printers

TC9825OH Rev. AA 2/02 ©2002 Paxar Corporation. All rights reserved.

Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Monarch has made every effort to provide complete and accurate information in this manual, Monarch shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual.

©2002 Paxar Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Paxar Corporation.

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

Trademarks

MONARCH®, MPCL, 917, 9800, 9825, and 9850 are trademarks of Monarch Marking Systems, Inc. Paxar® is a trademark of Paxar Corporation.

Microsoft and MS-DOS are trademarks of Microsoft Corporation.

Windows and NT are trademarks of Microsoft in the U.S. and other countries. NetWare is a trademark of Novell, Inc. in the United States and other countries. Centronics is a trademark of Centronics Data Computer Corporation.

TrueType is a registered trademark of Apple Computer, Inc. Hewlett-Packard is a trademark of Hewlett-Packard Inc.

HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc. Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

Paxar Corporation

170 Monarch Lane

Miamisburg, Ohio 45342

T A B L E O F C O N T E N T S

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Unpacking the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Ordering Programmer’s Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

About Monarch® MPCL Toolbox Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Establishing Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Connecting the Communication Cable . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Using the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Printer Status Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Selecting a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Exiting an Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

LOADING SUPPLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Loading Labels or Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Using the Optional Tear Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Using Linerless Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Adding the Peel Edge or Shelf. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Adjusting the Wide/Narrow Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

LOADING RIBBON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Loading Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

SETTING SUPPLY OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Supply Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Table of Contents i

Feed Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Backfeed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Print Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Supply Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Margin Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Batch Separators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Skip Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

Setting Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

COMMUNICATION VALUES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Baud Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Word Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Stop Bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Flow Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Reset to Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Parallel Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

SETTING DEFAULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-1

Monetary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Secondary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Decimal Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Slashed Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Power-Up Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Prompt Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

USING SCRIPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7-1

Initial Script Startup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Checking Script Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Formatting Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Downloading a Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Enabling a Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

ii Table of Contents

Viewing Script Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Deleting a Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Enabling Status Polling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

Enabling Immediate Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

Checking Available Flash Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

PRINTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

On-Demand Mode Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Printing an Error Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Pausing a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Restarting a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Canceling a Paused Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Repeating a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Printing TrueType® Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Licensing Your Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Clearing Label Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Replacing the Printhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

USING DIAGNOSTICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Factory Set Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Checking the Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Printing a Test Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

Checking Supply Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Using Password Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

Enabling the Password (System Administrators only). . . . . . . . . . . . 10-4

Service Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6

Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7

Common Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8

Table of Contents iii

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Linerless Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Ribbon Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

About Ribbons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Cable Pinouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

ACCESSORIES & OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-1

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Factory-Installed Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Ethernet Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

iv Table of Contents

G E T T I N G S T A R T E D

1

The Monarch® 9825 printer lets you print text, graphics, and bar codes on thermal transfer (ribbon) and thermal direct labels or tags. The 9825 printer prints labels continuously (in one strip) or on-demand (one label at a time).

You can print on edge aperture, die cut, black mark, or continuous (non-indexed) supplies. Continuous supply must be used in continuous mode. See "Supply Type" in Chapter 4 for more information about the supply types.

This chapter includes information about

unpacking the printer.

connecting the power cord.

connecting the communication cable.

using the printer’s control panel.

Several chapters of this manual have one or more charts showing the printer’s menu structure. For example:

MAIN MENU

CANCEL

 

 

PRINT

 

REPEAT

 

SETUP

 

 

SCRIPTS

 

 

DIAG.

ALL

 

 

 

MODE

 

BATCH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUPPLY

 

 

CONTRAST

 

DEFAULTS

 

 

 

PORT

 

FLASH

 

 

 

 

 

 

 

 

SETTINGS

 

MEMORY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The black boxes show where you are; the bordered boxes show how you got there.

Getting Started 1-1

A u d i e n c e

The Operator’s Handbook is for the person who prints and applies labels.

U n p a c k i n g t h e P r i n t e r

After you unpack the printer, you should have the 9825 printer, a power cord, and a ribbon take-up core (may already be on take-up reel). Keep the box and packaging material in case the printer ever needs repair.

O r d e r i n g P r o g r a m m e r ’ s M a n u a l s

The Packet Reference Manual, which describes how to create format and batch packets for printing labels, how to configure the printer online, how to diagnose printer error messages, and how to perform other advanced techniques can be downloaded from our Web site (www.monarch.com). You can print this manual or order a hard-copy version (part number TC9800PM).

A b o u t M o n a r c h ® M P C L To o l b o x U t i l i t i e s

The Monarch® MPCL Toolbox utilities are available on our Web site and are free to download. This group of development utilities helps you configure the printer, customize fonts, and download files. Monarch MPCL Toolbox utilities are not label production software. Call Customer Service for information about label production software.

1-2 Getting Started

C o n n e c t i n g t h e P o w e r C a b l e

The power supply automatically switches between 115V or 230V. No operator settings are required.

1.Plug the power cable into the socket. Plug the other end of the cable into a grounded electrical outlet.

2.Turn on the printer. Press ( I ) to turn on and ( O ) to turn off the printer.

E s t a b l i s h i n g C o m m u n i c a t i o n s

Before the printer can accept print jobs from the host, you must:

Connect the communication cable to the printer and to the host.

Set the communication values on the printer to match those at the host. (Only required if you are using the serial port.)

Make sure the printer is off before connecting the cable to the communication port.

Parallel Port

Power Cable goes here

Serial Port

Ask your System Administrator which method you will use to communicate with the host:

Serial Communication 9 to 25 pin cable (Part #118364)

25 to 25 pin cable (Part #118366)

Parallel Communication IEEE-1284 or Centronics® mode cable (Part #118363)

Getting Started 1-3

C o n n e c t i n g t h e C o m m u n i c a t i o n C a b l e

Connect the communication cable into the appropriate port. Secure the cable with the connecting screws (serial) or spring clips (parallel).

If you are communicating with the host through the serial port, make sure the printer’s communication values match those at the host. The factory default values are 9600 Baud, 8 bit data frame, 1 stop bit, no parity, and DTR flow control.

U s i n g t h e C o n t r o l P a n e l

The control panel has a two-line LCD display, 2 status lights, and five buttons. The control panel displays error codes/messages, and allows you to setup/configure the

printer.

P r i n t e r S t a t u s L i g h t s

Power:

The printer shows a

 

steady green light

 

when it is on.

Fault:

The printer shows a

 

blinking amber light

 

when there is a

 

printer error.

B u t t o n F u n c t i o n s

 

Feed/Cut:

 

Prints a label in the on-demand mode.

 

 

Feeds a blank label if there is no print job.

 

 

Prints a label with error information that is

 

 

useful to your System Administrator if an

 

 

error is displayed.

1-4 Getting Started

Enter/Pause:

When the printer is online, pauses the current

 

print job or resumes a paused print job.

 

When the printer is offline, selects the

 

displayed menu item.

Escape/Clear:

 

When an error is present, clears the error.

 

 

When a job (batch) is printing, cancels the

 

 

print job (batch). For more information

 

 

about canceling batches, see "Canceling a

 

 

Paused Batch" in Chapter 8.

 

 

When the printer is online (without errors),

 

 

enters the offline menu mode.

 

 

When the printer is in the offline menu

 

 

mode, returns the display to the next

 

 

higher menu.

l

When the printer is in the offline menu mode,

 

displays the previous menu item.

r

When the printer is in the offline menu mode,

 

displays the next menu item.

l and r

In online mode, prints a test label when you

 

press the buttons at the same time. Hold for

 

one second and release.

D i s p l a y

The display shows a three-digit error code and brief message to identify any problem the printer may have. For a description of the problem, look up the error code in Chapter 10, "Using Diagnostics."

Getting Started 1-5

S e l e c t i n g a F u n c t i o n

The Main menu has several functions (operating modes). These functions are shown in the chart below.

MAIN MENU

CANCEL

 

 

PRINT

 

REPEAT

 

SETUP

 

 

SCRIPTS

 

 

DIAG.

ALL

 

 

 

MODE

 

BATCH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUPPLY

 

 

CONTRAST

 

DEFAULTS

 

 

 

PORT

 

FLASH

 

 

 

 

 

 

 

 

SETTINGS

 

MEMORY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the printer displays PRINT MODE Ready when you turn it on, press Escape/Clear to display the Main menu.

To display menu options, press l or r.

When the screen displays a right arrow, press r to display more options.

MAIN MENU

 

Cancel All

r

When the screen displays a left arrow, press l to display more options.

MAIN MENU

lDiagnostics

When the screen displays a left and a right arrow, press either l or r to display more options.

MAIN MENU

l Print Mode r

1-6 Getting Started

When you see the menu option you want, press Enter/Pause to select it.

The Main Menu controls the printer’s setup and operation. Through the Setup Menu, you can select a sub-menu for the supply, contrast, default, or port settings. Each of those sub-menus have several options, such as ribbon, speed, monetary symbols, and baud rate.

E x i t i n g a n O p t i o n

To exit an option, press Escape/Clear once. You will exit to the next higher menu.

If you press Escape/Clear from a menu, your settings are not saved. Your settings are only saved when you press Enter/Pause from a menu.

Getting Started 1-7

1-8 Getting Started

L O A D I N G S U P P L I E S

2

This chapter describes how to load:

a roll of supply

fan-fold supply

a roll of tag supply.

There are two types of supplies:

Thermal Direct specially treated thermal supplies that do not use a ribbon for printing.

Thermal Transfer standard supplies that require a ribbon for printing.

If you are using thermal direct supplies, do not load a ribbon.

If you switch from black mark to die cut supplies, make sure the printer’s supply type is set correctly. See "Supply Type" in Chapter 4 for more information. Your System Administrator can also send the supply setup packet to change the supply type. Refer to the optional Packet Reference Manual for more information about sending the supply setup packet.

Loading Supplies 2-1

L o a d i n g L a b e l s o r Ta g s

Make sure the printer is configured for the correct supply type.

1.Open the cover.

2.Unlock the printhead by turning the retaining latch.

3.Lift printhead assembly using the printhead tab until the assembly locks into place.

Printhead Tab

Deflector Tab

4.Place the roll of supply on the supply holder. For labels, the supply unrolls from the top or the bottom. For tags, make sure the supply unrolls from the bottom, because tag rolls are wound face in.

Do not pick up the printer by the supply holder.

2-2 Loading Supplies

Supply Holder

Guides

5.Adjust the supply holder guides so the sides barely touch the roll. Make sure the supply roll turns freely.

If you are using fan-fold supplies, place the supply stack behind the printer, label side facing up.

6.Push down on the supply lever to unlock the supply guides.

7.Lay the label strip across the supply guide so that a few inches extend past the front of the printer. Tuck the supply under the nibs and in between the die cut sensor.

For fan-fold supplies, lay the label strip over the supply holder and across the supply guide so that a few inches extend past the front of the printer. Tuck the supply under the nibs and in between the die cut sensor.

Loading Supplies 2-3

8.Adjust the supply guides so they touch the supply. Push up on the supply lever to lock the supply guides into place.

Die Cut

Sensor

Nibs

Supply Lever

9.Hold the printhead assembly by the printhead tab while pressing down on the printhead release.

2-4 Loading Supplies

10.Close the printhead by pressing down on the thumb well until you hear it click into place.

Thumb Well

11.Close the cover.

12.Press Feed/Cut to position the supply under the printhead.

You may need to adjust the wide/narrow knobs depending on the width of your supply. See "Adjusting the Wide/Narrow Knobs" for more information.

If the printer will be unused for extended periods of time, we recommend leaving the printhead unlatched.

Loading Supplies 2-5

L o a d i n g L a b e l s f o r t h e O p t i o n a l P e e l M o d e :

Peel mode is an option that must be purchased separately. In peel mode, the printer separates the backing paper from the label. The next label is not printed until the completed one is removed from the printer. Make sure the printer is configured for on-demand mode and the correct supply type.

The minimum feed length is 1.5 inches for peel mode. We recommend using 0.5-inch gap supplies in peel mode when backfeed is disabled. Hold the leading edge of peeled labels when printing on stock longer than six inches. You must use non-perforated supplies for peel mode. Follow the steps for loading supplies from the previous section. Then, follow these steps after you close the printhead.

1.Remove the labels from the first 10 inches of the backing paper.

2.Press down on the exit cover tabs to open the exit cover on the front of the printer.

Exit Cover

2-6 Loading Supplies

3. Feed the backing paper over the peel bar.

Peel Bar

Lower Opening

4.Feed the backing paper through the lower opening of the exit cover. Close the exit cover. Pull down firmly on the backing paper to remove any slack.

Tear Edge

Backing Paper

When removing the backing paper, pull up across the saw-toothed tear edge. Make sure the backing paper tears at the edge.

Loading Supplies 2-7

5.Close the printer’s cover.

6.Press Feed/Cut to position the supply under the printhead.

U s i n g t h e O p t i o n a l Te a r B a r

Note the following change to loading labels if you have purchased the optional tear bar. Tear labels against the tear bar. You cannot tear tags with the tear bar.

Slide the supply between the tear bar and peel bar.

Tear Bar

Peel Bar

Do not tear both label and backing paper at the same time.

Tear labels against the tear bar.

Tear backing paper against the tear edge.

Tear Edge

Backing Paper

2-8 Loading Supplies

U s i n g L i n e r l e s s S u p p l y

Linerless printing is an option that must be purchased separately on the original printer order. The linerless option is not customer or field-installable.

You must use thermal direct and black mark supplies for linerless applications. The linerless printer must use on-demand mode.

For maximum platen roller life, use only wide or only narrow supplies. Switching between wide and narrow supplies may lead to uneven platen roller wear and possibly reduce the platen roller life. Narrow supplies are two inches wide or less. Wide supplies are greater than two inches. However, when using linerless supply, adjust the wide/narrow knobs to the narrow setting (knobs are up).

To prevent jams, do not leave the printhead closed (in the locked position) longer than 30 minutes without printing. Open (unlock) the printhead before a break period, at the end of each shift, and at the end of each day.

Your linerless machine includes a shelf already installed. You can remove the shelf and add the peel edge if you are not using linerless supplies.

A d d i n g t h e P e e l E d g e o r S h e l f

1.Turn off the printer.

2.Open the cover.

3.Unlock the printhead by turning the retaining latch.

4.Lift the printhead assembly using the printhead tab until the assembly locks into place.

Loading Supplies 2-9

5. Press down on the exit cover tabs to open the exit cover.

6.Pull back slightly on the spring latch with your thumb or fingernail and lift the shelf out.

CAUTION

Be careful when inserting or removing the shelf. The shelf has sharp points.

2-10 Loading Supplies

7.If inserting the peel bar:

Insert the left edge of the peel bar into the side slot at an angle. Then, slide the peel bar to the right and press down until you hear it click into place. The peel bar must be lined up with the platen roller.

8.If inserting the shelf:

Insert the left edge of the shelf into the side slot at an angle. Slide the shelf to the right, aligning it with the spring latch, and press down until you hear it click into place. The shelf must be lined up with the platen roller.

Loading Supplies 2-11

The shelf must be parallel to the platen roller, not at an angle. See the following diagrams.

Platen Roller

Spring Latch

Shelf

Shelf inserted correctly.

Platen Roller

Shelf

Shelf not inserted correctly.

CAUTION

Make sure the shelf is not misaligned with the platen roller, or damage to the platen roller could occur.

2-12 Loading Supplies

9.Close the exit cover.

10.Load supplies by following the label loading procedures. You may notice a different color and texture on the platen roller. Linerless supplies do not stick to the textured platen roller.

11.Close the printhead assembly and the cover.

12.Turn on the printer.

13.Verify the alignment of the platen roller with the peel bar or shelf. Press Feed/Cut to position the supply under the printhead.

A d j u s t i n g t h e W i d e / N a r r o w K n o b s

You may need to adjust the two wide/narrow knobs according to the width of your supply. For supply that is more than two inches, adjust the knobs to the wide setting. For supply that is two inches or less, adjust the knobs to the narrow setting. For linerless supply, use the narrow setting (knobs are up). If you experience ribbon smudging in cold, dry environments, adjust the wide/narrow knobs to the wide setting.

You must adjust both of the knobs to the same position.

For wide supplies, push down and turn the wide/narrow knobs clockwise with a screwdriver.

For narrow supplies, turn the wide/narrow knobs counter-clockwise with a screwdriver until it pops back up.

The adjustment is shown in the wide position.

Loading Supplies 2-13

2-14 Loading Supplies

L O A D I N G R I B B O N

3

This chapter describes how to load a ribbon roll.

There are different ribbon requirements for the two types of supplies:

Thermal Direct do not use a ribbon for printing.

Supplies

Thermal Transfer require a ribbon for printing.

Supplies

If you are using thermal direct supplies, do not load a ribbon.

Loading Ribbon 3-1

L o a d i n g R i b b o n

Make sure the printer is configured to use a ribbon.

To load ribbon:

1.Open the cover.

2.Unlock the printhead by turning the retaining latch.

3.Lift printhead assembly using the printhead tab until the assembly locks into place.

Printhead Assembly

Deflector Tab

4.Push the deflector tab down.

5.Slide the extra ribbon core on the take-up reel as far as it will go with the "Monarch This End Out" writing facing out. Use your empty ribbon core as the take-up core. The take-up core only fits on the take-up reel one way. (An extra take-up core is available by ordering part number 117961.)

3-2 Loading Ribbon

Loading...
+ 76 hidden pages