881 LEG PRESS ADAPTER KIT FOR 880 GYM SYSTEM
WARNING:
Read and follow all directions for each step to insure proper assembly of this product.
USER’S GUIDE
CLASS H |
1 |
Version: 881102 |
PART # 7168701 |
|
Revision: 3/08/02 |
REV. C |
|
|
TABLE OF CONTENTS
Safety Statement |
.............2 |
General Notes.................. |
3 |
Tools Required................ |
3 |
Parts list.......................... |
4 |
Assembly Instructions..... |
5-26 |
Insert-Registration Card |
|
IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1.Before using, read all the warnings and instructions on the use of this machine. Use only for intended exercise. DO NOT modify the machine.
2.Obtain a medical exam before beginning any exercise program.
3.Keep body and clothing free of all moving objects.
4.Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a broken or
jammed machine. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.
5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in this condition. DO NOT attempt to fix. Notify your authorized ParaBody dealer.
7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.
8.Make sure all spring loaded pull pins are fully engaged in the adjustment position and fully tighten thumbscrew before use.
9.Children must not be allowed near this machine. Supervise teenagers.
.
NOTE: In a continual effort to improve our products, specifications are subject to change © 2001 Life Fitness, a division of Brunswick Corporation. All rights reserved. ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
IMPORTANT NOTES
Please note:
*Thank you for purchasing the ParaBody 881 LEG PRESS ADAPTER KIT. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
*This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated.
Tools Required for Assembly
*9/16” wrench
*Ratchet with 9/16” socket and 6” Ratchet extension
*Adjustable wrench
*Tape measure
Bolt Length Ruler
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OFTHE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
|
1/2 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
3
PARTS LIST
KEY |
PART # |
DESCRIPTION |
QTY |
|
KEY |
PART # |
DESCRIPTION |
QTY |
1 |
7160008 |
LEG PRESS ADAPTER |
1 |
|
11 |
6533501 |
CABLE CLIP |
2 |
2 |
7156001 |
SHORT LEG PRESS CABLE |
1 |
|
12 |
3102807 |
3/8” LOW HEIGHT LOCK NUT |
6 |
3 |
7156102 |
LONG LEG PRESS CABLE |
1 |
|
13 |
6122701 |
3/8 X 1” SPACER |
6 |
4 |
3116201 |
3-1/2” PULLEY |
9 |
|
14 |
6480301 |
3/8” FLANGE SPACER |
10 |
5 |
3102501 |
3/8” WASHER |
7 |
|
15 |
7242408 |
PULLEY BRACKET |
1 |
6 |
3102802 |
3/8” LOCKNUT |
8 |
|
16 |
7245008 |
PULLEY L-BRACKET |
1 |
7 |
3102924 |
3/8 X 1-3/4” BOLT |
4 |
|
17 |
6995708 |
PULLEY PLATE |
1 |
8 |
3102922 |
3/8 X 2-3/4” BOLT |
2 |
|
18 |
3102904 |
3/8 X 3”BOLT |
2 |
9 |
3102905 |
3/8 X 3-3/4” BOLT |
3 |
|
19 |
3102955 |
3/8” X 4-1/4” BOLT |
2 |
10 |
3102935 |
3/8 X 4-1/2” BOLT |
5 |
|
|
|
|
|
NOTE: The LEG PRESS ATTACHMENT (100102) must be assembled before connecting it to the PARABODY 880 GYM SYSTEM
•NOTE: If assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM SYSTEM without SECOND STACK OPTION , please refer to PAGE 5.
•NOTE: If assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM SYSTEM with SECOND STACK OPTION , please refer to PAGE 18.
•NOTE: It is recommeded that the SECOND STACK OPTION is assembled before the LEG PRESS OPTION.
4
|
3/8” |
|
LOCK |
|
NUT |
3/8 X 3-3/4” |
3/8 X 1” |
SPACER |
|
BOLT |
THREADED |
|
|
|
HOUSING |
FIGURE 1 |
|
STEP 1:
•NOTE: Follow these steps if assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM SYSTEM without SECOND STACK OPTION, otherwise if the SECOND STACK OPTION is assembled please refer to PAGE 18.
•REMOVE the LAT CABLE, THREADED HOUSING, 3/8 X 3-3/4” BOLT, two 3/8 X 1” SPACERS and one 3/8” LOCK NUT from the 880 GYM SYSTEM. See FIGURE 1. Save the LAT CABLE if you ever plan to purchase the SECOND STACK OPTION. Discard the 3/8 X 1” SPACERS. (NOTE: Remove pulleys for ease of removal.)
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
|
1/2 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
5
PEC STATION PAD
3/8 X 2-3/4” 3/8” WASHER
FRAME
FIGURE 2
STEP 2:
• Remove the PEC STATION PAD from the FRAME, then discard the two 3/8 X 2-3/4” BOLTS. See FIGURE 2.
15
PEC STATION PAD
18 3/8 X 3”
FRAME
FIGURE 3
STEP 3:
•SECURELY assemble the PULLEY BRACKET (15) and the PEC STATION PAD to the FRAME using two 3/8 X 3” BOLTS (18). See FIGURE 3.
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
|
1/2 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
6
REAR UPRIGHT |
3/8 X 4” BOLTS |
FIGURE 4 |
STEP 4:
•Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in FIGURE 4. Discard the 3/8 X 4” BOLTS.
FIGURE 5 |
|
16 |
REAR UPRIGHT |
|
|
19 |
3/8 X 4-1/4” |
STEP 5:
•SECURELY assemble the PULLEY L-BRACKET (16) to the REAR UPRIGHT using two 3/8 X 4-1/4” BOLTS (19), four previously removed 3/8” WASHERS and two previously removed 3/8” LOCK NUTS as shown in FIGURE 5.
7
BOOM |
BRACKET |
2 |
FRAME |
FIGURE 6 |
STEP 6:
•Route the SHORT LEG CABLE (2) through the FRAME and BOOM BRACKET as shown in FIGURE 4. (NOTE: Remove pulleys for ease of installation.)
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
|
1/2 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
8