PANJIT SD10100YT, SD1020YT, SD1030YT, SD1040YT, SD1050YT Datasheet
...
SD1020YT Thru SD10100YT
SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 to 100 Volts CURRENT - 10.0 Amperes
FEATURES
•Plastic package has Underwriters Laboratory Flammability Classification 94V-O
•For thorough hole applications
•Low profile package
•Built-in strain relief
•Metal to silicon rectifier majority carrier conduction
•Low power loss, High efficiency
•High current capability, low VF
•High surge capacity
•For use in low voltage high frequency inverters, free wheeling, and polarity protection applications
•High temperature soldering guaranteed:260°C/10 seconds at terminals
MECHANICAL DATA
Case: TO-251AB molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes cathode
Weight: 0.015 ounce, 0.4 gram.
TO-251AB
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
1 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
|
|
3 |
4 |
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Resistive or inductive load.
|
|
SYMBOLS |
SD1020YT |
SD1030YT |
SD1040YT |
SD1050YT |
SD1060YT |
SD1080YT |
SD10100YT |
UNITS |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Recurrent Peak Reverse Voltage |
V RRM |
20 |
30 |
40 |
50 |
|
60 |
80 |
100 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum RMS Voltage |
|
V RMS |
14 |
21 |
28 |
35 |
|
42 |
56 |
70 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Blocking Voltage |
|
V DC |
20 |
30 |
40 |
50 |
|
60 |
80 |
100 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Average Forward Rectified Current |
I (AV) |
10.0 |
10.0 |
10.0 |
10.0 |
|
10.0 |
10.0 |
10.0 |
Amps |
|
at TC=75oC |
|
|
|||||||||
Peak Forward Surge Current |
|
|
|
|
|
|
|
|
|
|
|
8.3ms single half sine-wave superimposed on |
I FSM |
200 |
200 |
200 |
200 |
|
200 |
200 |
200 |
Amps |
|
rated load(JEDEC method) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Instantaneous Forward Voltage at 10.0A |
V F |
0.55 |
0.55 |
0.55 |
0.75 |
|
0.75 |
0.85 |
0.85 |
Volts |
|
(Note 1) |
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Reverse Current (Note 1)TA=25oC |
I R |
0.2 |
0.2 |
0.2 |
0.2 |
|
0.2 |
0.2 |
0.2 |
mA |
|
at Rated DC Blocking Voltage |
TA=100oC |
20 |
20 |
20 |
20 |
|
20 |
20 |
20 |
||
Maximum Thermal Resistance (Note 2) |
Rθ JC |
6 |
6 |
6 |
6 |
|
6 |
6 |
6 |
oC / W |
|
|
|
Rθ JA |
80 |
80 |
80 |
80 |
|
80 |
80 |
80 |
|
Operating Junction Temperature Range |
T J |
|
|
|
-55 to +125 |
|
|
|
oC |
||
Storage Temperature Range |
|
T STG |
|
|
|
-65 to +150 |
|
|
|
oC |
|
NOTES:
1.Pulse Test with PW=300µ sec, 2% Duty Cycle.
2.Mounted on P.C. Board with 14mm2 (.013mm thick) copper pad areas.
Part Number: SD1020YT - SD10100YT |
PAGE 1 |
Loading...