PANJIT PG150R, PG151R, PG152R, PG154R, PG156R Datasheet

PG150R THRU PG158R

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

VOLTAGE - 50 to 800 Volts	CURRENT - 1.5 Amperes
FEATURES	DO-15

• Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound

•1.5 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Fast switching for high efficiency

•Glass passivated junction in DO-15 package

MECHANICAL DATA

Case: Molded plastic, DO-15

Terminals: axial leads, solderable per MIL-STD-202,

Method 208

Polarity: denotes cathode

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.

	PG150R	PG151R	PG152R		PG154R	PG156R	PG158R	UNITS
Peak Reverse Voltage, Repetitive; VRM	50	100	200		400	600	800	V
Maximum RMS Voltage	35	70	140		280	420	560	V
DC Reverse Voltage; VR	50	100	200		400	600	800	V
Average Forward Current, IO @ TA=55 ¢J 3.8”lead				1.5				A
length 60 Hz, resistive or inductive load
Peak Forward Surge Current, IFM (surge) 8.3msec.				50				A
single half sine wave superimposed on rated
load(JECEC method)
Maximum Forward Voltage VF @1.5A, 25 ¢J				1.3				V
Maximum Reverse Current, @Rated Ta=25 ¢J				5.0				£g A
Reverse Voltage Ta=100 ¢J				150
Typical Junction capacitance (Note 1) CJ				25				PF
Typical Thermal Resistance (Note 2) R £KJA				45				¢J /W
Reverse Recovery Time	150	150	150		150	250	500	ns
IF=.5A, IR=1A, Irr=.25A
Operating and Storage Temperature Range			-55 to +150					¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted