PANJIT PG101R, PG102R, PG104R, PG106R, PG108R Datasheet

PG100R THRU PG108R

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

VOLTAGE - 50 to 800 Volts	CURRENT - 1.0 Ampere
FEATURES
• Plastic package has Underwriters Laboratory	DO-41
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound

•Glass passivated junction

•1 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Fast switching for high efficiency

MECHANICAL DATA

Case: Molded plastic, DO-41

Terminals: axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	PG100R	PG101R	PG102R		PG104R	PG106R	PG108R	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200		400	600	800	V
Maximum RMS Voltage	35	70	140		280	420	560	V
Maximum DC Blocking Voltage	50	100	200		400	600	800	V
Maximum Average Forward Rectified				1.0				A
Current .375"(9.5mm) lead length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine				30				A
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A				1.3				V
Maximum Full Load Reverse Current Full Cycle				5.0				£g A
Average, .375”,9.5mm Lead Length at TA=55 ¢J
Maximum DC Reverse Current				150				£g A
at Rated DC Blocking Voltage TA=100 ¢J
Maximum Reverse Recovery Time(Note 1)	150	150	150		150	250	500	ns
Typical Junction capacitance (Note 2) CJ				15				PF
Typical Thermal Resistance (Note 3) R £KJA				67				¢J /W
Operating and Storage Temperature Range TJ			-55 to +150					¢J

NOTES:

1.Measured with IF=.5A, IR=1A, Irr=.25A

2.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

3.Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted