|
Electronic Board |
|
Operating Instructions |
[Stand (option)] [Wall-mounting (option)] |
With Installation Manual |
Stand and wall-mounting kit are optional. |
(for qualified service personnel) |
|
Model No. UB-7325 |
Instructions Operating
Manual Installation
•Before operating this unit, please read these instructions completely. After reading them, preserve them carefully for future reference.
•Because of the nature of the print film, all the printed text will remain on the film.
•This product is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of this equipment.
•To locate the closest authorized dealer in your area, please call 1-800-449-8989.
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Accessories
|
Q’ty |
Q’ty |
• Thermal transfer film |
. . . . . . . . . . . . . . 1 |
• Letter size copy paper . . . . . . . . . . . . . 20 |
• Markers (red, black, and blue) . . . . . . 1 each |
• Software CD-ROM . . . . . . . . . . . . . . . 1 |
|
• Operating Instructions |
. . . . . . . . . . . . . 1 |
• Warranty card . . . . . . . . . . . . . . . . . . 1 |
• Eraser . . . . . . . . . . . . . . . . . . . . . . 1 |
|
|
• Power cord . . . . . |
. . . . . . . . . . . . . . 1 |
|
*The stand and wall-mounting kit are optional. By way of example, this manual describes an Electronic Board which is used with the stand.
*USB cable is not included.
Things you should keep a record of
Attach your sales receipt here
For your future reference |
|
Date of purchase: _________________________ |
Serial number: ____________________________ |
Dealer’s name and address: ______________________________________________________________
Dealer’s address: Tel:
Federal Communications Commission Requirements
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Warning: To assure continued FCC compliance, the user must use only the provided power supply cord. Also, any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
•Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•IBM and AT are trademarks of International Business Machines Corporation in the United States, other countries, or both.
•Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
•Adobe, Acrobat, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
•SANFORD and EXPO are registered ® U.S. trademarks of SANFORD or its Affiliates.
•All trademarks referred to in this manual are property of their respective companies.
•This software is based in part of the work of the IndependentJPEG Group.
•This software is based on the “libtiff” which has the following copyrights: Copyright (C) 1988-1997 Sam Leffler
Copyright (C) 1991-1997 Silicon Graphics, Inc.
The information given in this Operating Instructions is subject to change without notice.
2
|
Table of Contents |
|
|
|
Page |
|
For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 4 |
Before |
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 5 |
|
• CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . 6 |
You Start |
|
|
|
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 8 |
• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing the Thermal Transfer Film. . . . . . . . . . . . . . . . . . . . . . . 10
Loading Copy Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Copy types and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the Projector Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacing the Thermal Transfer Film . . . . . . . . . . . . . . . . . . . . . . 14
Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using
Computer Interfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
17 |
• Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
17 |
• Installing Drivers / Board Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
18 |
• Installing Quick Image Navigator / Panasonic-DMS . . . . . . . . . . . . . . . . . . . . |
19 |
• Removing Drivers / Board Image Capture / Quick Image Navigator . . . . . . . . |
19 |
• Removing Panasonic-DMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
• Scanning with the Board Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
• Scanning with the Quick Image Navigator / Panasonic-DMS . . . . . . . . . . . . . |
21 |
• Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
22 |
• Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
Daily Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Cleaning the screen and the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Caring for the eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Cleaning the printer head, platen roller and pick-up roller . . . . . . . . . . . . . . . . 24
Help Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Meanings of error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
• Option and Separately available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Warning about saving data
When the system storage device or any of its optional storage device is adversely effected by operational errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction, repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a point of reading the precautionary notes in the Operating Instructions and the help information, and observe them during operation.
Please observe carefully the following precaution:
• Make absolutely sure that all important data is saved by back-up or the original is saved.
The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data stored on floppy disks, hard disks, optical disks, or other memory devices.
Instructions Operating
3
For Your Safety
CAUTION:
TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE.
The product should be used only with the power cord that is supplied by the manufacturer.
Stop operation immediately if your product emits smoke, excessive heat, abnormal smell or unusual noise. These conditions can cause fire or electric shock. Immediately turn the product off and unplug the power cord, and contact your dealer for service.
CLASS 1 LED PRODUCT
4
Precautions
Never remove the cover, take apart or modify the |
Do not position the electronic board in a location where |
||
product. This will void the warranty. |
it is unstable. |
||
|
|
|
|
|
|
|
|
Do not put drinks, other liquids or heavy items on the |
After installing or moving the electronic board, lock the |
tray or screen. |
casters and set the fall-prevention extension legs. |
|
Push to lock |
|
Locking the casters |
|
(Push this side) |
Do not use the electronic board in an excessively |
If the electronic board is not going to be used for an |
humid or dusty location. |
extended period of time (e.g., during extended |
|
holidays), turn off the power and remove the plug from |
|
the wall outlet. |
Instructions Operating
5
Precautions
Do not lean against the screen or on the cover (lower), even if the electronic board is mounted on the wall.
Have the unit installed, removed and disposed of only by qualified service personnel.
CHOKING HAZARD
Keep the marker’s cap out of reach of children to prevent swallowing.
When the unit will no longer be used, in order to prevent it from falling, do not leave the unit installed, but remove it. If the unit falls, it can cause injury.
■CD-ROM
To prevent the CD-ROMs from accidental damages:
Do not touch or write on the surface |
Do not leave the disc out of the |
Do not leave the disc in direct |
of the disc. |
protective case. |
sunlight or near heat sources. |
|
|
|
|
|
|
|
Do not place heavy objects on the |
To clean the disc, hold the disc by |
|
||||
disc case or drop the case. |
its edges and wipe it from the |
|
||||
|
|
|
center to the edges with a dry, soft |
|
||
|
|
|
|
|||
|
|
|
cloth. |
|
||
|
|
|
|
|
|
|
6
Precautions
Installation • Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents as this may cause stretching and/or discoloration of the screen.
•Do not install the unit in strong sunlight or strong lighting. Proper copying may become impossible.
•Do not install the unit in locations where the temperature may change suddenly as this may disable the unit’s ability to make copies.
Screen Film |
• Make thick and dark lines inside the copying area. |
|
25 mm (1" ) |
|
|
Note that any writing inside the shaded area (on |
|
|
|
|
|
|
|
|
|
right) cannot be copied. |
|
|
|
|
• Do not allow writing to remain on the screen for an |
35 mm |
Copying area |
35 mm |
|
extended period of time as it will become harder to |
|||
|
(1 3/8" ) |
|
(1 3/8" ) |
|
|
erase. |
|
|
|
|
• Do not touch the screen, write with markers, or |
|
25 mm (1" ) |
|
|
erase while the screen is moving as this may result |
|
|
|
|
|
|
|
|
|
in damage to the unit. |
|
|
|
•Do not erase with an overly dirty eraser (see page 24).
•Use a commercially available white board cleaner for hard-to-erase stains. (SANFORD® EXPO® white board cleaner etc.)
•Do not attach chart paper to the screen film for copying as this may result in damage to the unit.
Markers, |
• Use only the included or designated markers, erasers and thermal transfer film. (See page |
Erasers and |
28.) |
Thermal |
Use of accessories other than those included or designated (such as oil-based |
Transfer Film |
markers) may damage the screen or result in hard-to-erase markings. |
•Do not store the thermal transfer film in a location subject to extreme changes in temperature (such as near air conditioning or heating equipment) as this may cause condensation on the thermal transfer film and result in poor print quality and/or paper jams.
•The length of one roll of designated thermal transfer film (Replacement film: UG-6001) is approximately 50 meters (164 ft.). One roll of thermal transfer film can make approximately 150 sheets of copies.
Note that the total number of copies may differ depending on the operating conditions. Also note that the length of the thermal transfer film supplied with the unit is shorter than the replacement film roll and is only approximately 10 meters (32.8 ft.).
•Store markers horizontally as vertical storage may stop the ink from coming out.
Power Cord • The included power cord is for use with this unit only. Do not use it with other devices.
•When moving the unit, disconnect the power cord from the electrical power socket and from the printer’s power connector and coil it for transportation as stepping on the power cord or having it catch on something during movement may result in damage to the cord.
Replacing |
• Dispose of the used thermal transfer film in a trash receptacle for burnable trash. |
the Thermal |
• A negative of the copied image will remain on the thermal transfer film. (To protect the |
Transfer Film |
security of your information, we recommend cutting up the used thermal transfer film with |
|
scissors or shredder before disposing of it.) |
USB Cable • Use a shielded USB cable that is certified as logo by USB-IF.
•If you connect the electronic board to a USB hub, it is not guaranteed to work.
•Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.
Projector |
• Light from the projector may enter the eye when using a projector to project images for the |
|
purpose of making presentations and so on. Be very careful as direct projector light may |
|
hurt the eyes. |
Instructions Operating
7
Part Names and Functions
Scanner
Screen
One screen (with no ruled lines) of four screens can also be used for a projector (see page 14).
Tray
Printer
Stand
The stand is optional.
Output Port
This port holds up to 10 sheets of output paper.
Printer Open Lever
Push down this lever to open the printer door.
USB Connector
(See page 17.)
Paper Cover
Open this cover to load copy paper.
Control Panel
(See page 9 for details.)
Power Switch
ON
OFF
AC Inlet
Cord Holder
Power Cord
Printer Door
Open this door to load a thermal transfer film or to remove jammed paper.
(See pages 10, 15.)
8
Part Names and Functions
Contrast/Remaining Film |
Reverse Key |
|
Advance Key |
||
Indicator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contrast Key |
|
|
|
|
|
|
|
|
|
|
|
|
Multi-Copy/Stop Key |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
Copy Key |
|
|
|
|
|
|
|
|
|
Multi-Copy/Error Indicator |
||||
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Panel |
Name |
|
|
|
|
|
|
|
Description |
||||||||
|
|
|
This lamp indicator notifies the user when the time to replace the thermal transfer |
||||||||||||||
|
|
|
film is approaching (estimated) and of the printing contrast used during copying. |
||||||||||||||
|
|
|
Indicator off: |
Normal printing contrast |
|||||||||||||
|
Contrast/ |
Indicator on: |
Darker than normal printing contrast |
||||||||||||||
|
Indicator flashing*: |
Almost time to replace the thermal transfer film |
|||||||||||||||
|
Remaining |
|
|
|
|
|
|
(Note that only about 15 more sheets may be |
|||||||||
|
Film |
|
|
|
|
|
|
copied when this indicator starts flashing.) |
|||||||||
|
Indicator |
|
|
|
|
|
|
Replacement film (UG-6001) is separately available |
|||||||||
|
|
|
|
|
|
|
|
|
from the dealer where you purchased your unit. |
*The flashing indicator will go out after the power is turned off, or the printer has been opened and closed. (When copying is performed, this indicator will begin flashing again.)
|
|
|
Contrast |
Each time this key is pressed, the unit will alternate between normal and dark |
|||
|
|
|
Key |
contrast modes (Normal/Dark). |
|
||
|
|
|
|
|
|||
|
|
|
Copy Key |
This key causes the screen to be copied. |
|||
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
This indicator displays the number of copies to be made. The display changes |
|||
|
|
|
Multi-Copy/ |
each time the Multi-Copy/Stop Key is pressed. |
|||
|
|
|
Error |
Example: |
1 → 2 → ··· → 9 → |
→1 → ··· |
|
|
|
|
(Selecting “ ” allows you to copy 4 screens continuously.) |
||||
|
|
|
Indicator |
||||
|
|
|
When an error occurred, a flashing symbol will appear in this display to |
||||
|
|
|
|
indicate the error status. (See page 27.) |
|||
|
|
|
|
|
|||
|
|
|
|
When making multiple copies or copying 4 screens continuously, press this |
|||
|
|
|
|
key until the desired number of copies or “ ” is displayed on the Multi-Copy/ |
|||
|
|
|
|
Error Indicator. This key can also be pressed to stop copying while executing |
|||
|
|
|
Multi-Copy/ |
multiple copies or copying 4 screens continuously. |
|||
|
|
|
• The display changes as shown below each time the screen is copied. After |
||||
|
|
|
|||||
|
|
|
Stop Key |
reaching 0, the display will reset to 1. |
|||
|
|
|
|
Example for multiple copies: |
|
||
|
|
|
|
5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.) |
|||
|
|
|
|
Example for copying 4 screens continuously: |
|||
|
|
|
|
→ |
→ |
→ → 0 → 1 (Display changes.) |
|
|
|
|
|
|
|||
|
|
|
Advance |
Pressing this key advances the screen from right to left. |
|||
|
|
|
Pressing this key twice advances two screens from right to left. |
||||
|
|
|
Key |
Pressing this key more than 2 seconds advances the screen to the projector |
|||
|
|
|
|
screen with no ruled lines. |
|
||
|
|
|
Reverse |
Pressing this key advances the screen from left to right. |
|||
|
|
|
Pressing this key twice advances two screens from left to right. |
||||
|
|
|
Key |
Pressing this key more than 2 seconds advances the screen to the projector |
|||
|
|
|
|
screen with no ruled lines. |
|
Instructions Operating
9
Installing the Thermal
Transfer Film
Install the thermal transfer film in the printer.
1 Set the power switch to on ( I ).
•“ ” will flash on the Multi-Copy/Error Indicator when the thermal transfer film has run out.
•The screen will move to home position and stop.
ON
OFF
2 |
Push down the printer open lever and open |
the printer door. |
Printer door
3 Install the thermal transfer film.
1)Set the thermal transfer film, with the blue gear in front, on the right.
Blue gear
2) Insert the blue shaft into the front left hole.
Blue shaft
3) Place the blue gear on the front right groove.
Blue gear
4)Place the white shaft on both sides of the back grooves.
White shaft
10
4 Tighten the film, then close the printer door.
1)Rotate the blue gear in the direction of the arrow to take up the slack on the film.
Blue gear
•If a slack remains, perform step 3-2) through 4-1) again.
2)Securely close the printer door by using both hands until a click is heard.
•“ ” flashing on the Multi-Copy/Error Indicator will go out.
Latches
Note
•If “ ” is still flashing after closing the printer door, make sure that the thermal transfer film has been installed properly and tightened.
•The printer door should be closed to make copies properly. Confirm both latches are locked.
Loading Copy Paper
It is possible to load up to 40 sheets of Letter size copy paper [assuming a paper weight of 80 g/m2 (20 lb.)].
Note that only Letter size paper may be used.
When the unit is first used or when “ ” flashes on the Multi-Copy/Error Indicator to indicate that the unit is out of paper, load copy paper as described below.
Notes on Loading Copy Paper
Follow the guidelines below to ensure smooth and accurate printing by the unit.
•Only use Letter size copy paper having a weight of 60 g/m2 (16 lb.) to 90 g/m2 (24 lb.) as the copy paper for this unit.
•Do not simultaneously load paper of varying type and thickness as this may result in paper jams.
•Before adding copy paper, be sure to remove all the copy paper remaining inside the unit’s paper cover. (Note that copy paper will slightly resist being removed, but may be pulled out without problems.) After removing the copy paper, stack the removed paper together with the new paper, fan it thoroughly, square it and reload.
DO NOT USE THE FOLLOWING TYPES OF PAPER
•Extremely smooth or glossy paper
•Coated paper
•Thermal paper
•Paper that is printed on one side
•Wrinkled paper, creased paper, etc.
1Set the power switch to on ( I ).
•“ ” will flash on the Multi-Copy/Error Indicator when copy paper has run out.
•The screen will move to home position and stop.
ON
OFF
Instructions Operating
11
Loading Copy Paper
2 |
Pull the paper cover forward as shown in the |
figure. |
3 |
To prevent paper jams such as those caused |
by multiple sheets feeding at once, fan the |
paper thoroughly, square it, align it with the guide inside, and insert as far as it will go.
Guide
Maximum paper limit
Note
•Only use Letter size copying paper having a weight of 60 g/m2 (16 lb.) to 90 g/m2 (24 lb.) as the copy paper for this unit.
•Do not stack more copy paper in the unit than the maximum paper limit indicated by the guide (see the above figure) as this may result in paper jams. [Note that the unit can hold about 40 sheets of paper having a weight of 80 g/m2 (20 lb.).]
4 Close the paper cover until a click is heard.
Note
•Close the paper cover, or the unit will not work properly.
•The paper cover should be closed to make copies properly. Confirm the both latches are locked.
12
Making Copies
This section describes how to copy text and illustrations drawn on the screen.
1 Set the power switch to on ( I ).
• “ ” will light on the Multi-Copy/Error Indicator to indicate that the unit is ready to copy.
• The screen will move to home position and stop.
ON
OFF
2 Press the Copy Key |
|
. |
|
•Text and illustrations on the screen will be copied and copies emerge from the output port.
•The output port can hold up to 10 sheets of copy paper. (Note that exceeding the output port’s capacity may result in paper jams.)
•For details on making multiple copies and so on, see “Copy types and procedures” on this page.
Note
•Do not use paper that has been copied on one side by this printer as copy paper in this unit or in any other copiers or printers as this may result in dirty rollers, degradation of printing quality, paper jams, and streaks and smudges on output paper.
•Do not write on the back side of the output paper from this unit. The printed ink may be transferred underneath the paper.
•Text or images in shades of yellow will not copy.
[A]Copying the front of the screen
1)Press *1.
[B]Copying the back of the screen
1)Press or to move the screen to be copied to the front.
2)Press *1.
[C]Copying 4 screens continuously
1)Select “ ” by pressing .
2)Press .
•Press to stop copying in mid-operation.
[D]Making multiple copies (up to 9)
1)Select the number of copies (1 to 9) by pressing as necessary.
2)Press *1.
•Press to stop copying in mid-operation.
*1 When copying is finished, the next screen is displayed.
Instructions Operating
13
Using the Projector Screen / Replacing the Thermal Transfer Film
Using the Projector
Screen
One of four screens of this electronic board can also be used as the projector screen. The screen has no ruled lines so the projected image is easy to see.
1 |
Press |
or |
more than 2 seconds to |
move the screen to the projector screen. |
•“0” is displayed on the Multi-Copy/Error Indicator while the screen advances to the projector screen.
or
Press or to move the screen to the screen with no ruled lines.
2 Project an image on the screen.
Caution
•Light from the projector may enter the eye when using a projector to project images for the purpose of making presentations and so on. Be very careful as direct projector light may hurt the eyes.
Note
•Letters can be written on the projector screen by the marker provided. However, the writing may be harder to erase than on the other screens. To erase them, use a commercially available white board cleaner (SANFORD® EXPO® white board cleaner etc.).
Replacing the Thermal
Transfer Film
The unit is capable of producing about 15 more copies when the Contrast/Remaining Film Indicator begins to flash. The unit has run out of thermal transfer film and can no longer make copies when the Multi-Copy/Error Indicator flashes “ ”. Separately available replacement film (UG-6001) may be purchased from the dealer where you purchased the unit. Thermal transfer film is replaced as follows.
Notes on Replacing Thermal Transfer Film
•Only use the designated product (UG-6001) from Panasonic as the replacement film. (Note that using another type of replacement film may result in degraded printing quality or damage to the unit.)
•Thermal transfer film is disposable. Dispose of used thermal transfer film as “burnable” or “nonrecyclable” rubbish.
•A negative of the copied image will remain on the thermal transfer film. To protect the security of your information, we recommend cutting up the used thermal transfer film with scissors or shredder before disposing of it.
1Push down the printer open lever to open the printer door, and remove the used film.
2 |
Refer to steps 3 and 4 in the section of |
“Installing the Thermal Transfer Film” on |
page 10.
14