Manufactured by: |
81-IN3013-9922 |
for
Before attempting to connect or operate this product, please read these instructions completely.
PRODUCT INSTRUCTIONS
MODEL: P9000HW•HC•HP
PRECAUTIONS ON INSTALLATION
•The mounting brackets P9000HW, P9000HC or P9000HP are designed for outdoor use and can support the WV-7140 or WV-7135 housings.
The P9000HW is a wall mount bracket. The P9000HC is a corner mount bracket. The P9000HP is a pole mount bracket.
•Combined weight of camera, lens, housing, and pan/tilt must not exceed 85 lbs. (38 kg).
•Select a location where the combined weight of the bracket, housing, and camera can be properly supported.
INSTALLATION
1.Assemble bottom of swivel head and cable guard plate to the end of the main bracket body as shown at the right, by using the bolts provided. Place one rubber grommet provided in the hole found on the cable guard plate.
3.Mount the camera housing on the top of the swivel head and firmly attach it with two hex head bolts, lock washers and flat washers.
HOUSING
|
26 |
|
37 |
TOP OF |
52 |
SWIVEL |
|
4.Adjust the camera direction with the four bolts of the bracket and tighten the bolts firmly after adjustment.
60° |
90° |
90° |
|
|
|
60° |
|
|
2.Mount entire assembly in desired location. (Mounting hardware is not included.)
NOT PROVIDED |
P9000HW |
P9000HP
P9000HC
NOT PROVIDED