Panasonic KX-TG2432, KX-TG2431 User Manual

5 (1)

 

Operating Instructions

 

2.4 GHz Digital Cordless Answering System

 

Model No. KX-TG2431

 

2.4 GHz Digital Cordless Answering System

 

with Dual Handsets

Model shown is KX-TG2431.

Model No. KX-TG2432

This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider.

Charge the battery for 6 hours before initial use.

Please read these Operating Instructions before using the unit and save for future reference.

For assistance, visit our website: http://www.panasonic.com for customers in the U.S.A. or Puerto Rico.

Table of Contents

Introduction

Your phone . . . . . . . . . . . . . . . . . . . . 4 Accessory information . . . . . . . . . . . . . . 5 Important safety instructions . . . . . . . . . 6 For best performance . . . . . . . . . . . . . . . 8

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . 9 Battery installation . . . . . . . . . . . . . . . . 10 Battery charge . . . . . . . . . . . . . . . . . . . 11 Battery replacement . . . . . . . . . . . . . . . 12 Controls and displays . . . . . . . . . . . . . . 13

Controls . . . . . . . . . . . . . . . . . . . . . 13 Display . . . . . . . . . . . . . . . . . . . . . . . 15 Setting the date and time . . . . . . . . . . . 16

Making/Answering Calls

Making calls . . . . . . . . . . . . . . . . . . . . . 17 Answering calls . . . . . . . . . . . . . . . . . . 18 Useful features during a call. . . . . . . . . 19 HOLD button . . . . . . . . . . . . . . . . . . 19 MUTE button . . . . . . . . . . . . . . . . . . 19 Voice enhancer . . . . . . . . . . . . . . . . 19 Clarity booster . . . . . . . . . . . . . . . . . 20 Call share (KX-TG2432 only) . . . . . 20

PAUSE button (for PBX/long distance service users). . . . . . . . . . . . . . . . . . 20 Flash button . . . . . . . . . . . . . . . . . . 20 For Call Waiting service users . . . . . 21 Temporary tone dialing (for rotary/pulse service users) . . . . . . . . . . . . . . . . . 21

Phonebook

Using the phonebook . . . . . . . . . . . . . . 22 Adding items to the phonebook . . . 22 Calling someone in the phonebook . 23 Editing items in the phonebook . . . . 23 Erasing items in the phonebook . . . 23 Chain dial feature. . . . . . . . . . . . . . . 24

Copying phonebook items (KX-TG2432 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Copying an item . . . . . . . . . . . . . . . 24 Copying all items . . . . . . . . . . . . . . . 25

Caller ID Service

Using Caller ID service. . . . . . . . . . . . . 26 Caller list. . . . . . . . . . . . . . . . . . . . . . . . 27

Viewing the caller list and calling

back . . . . . . . . . . . . . . . . . . . . . . . . . 27 Editing a caller’s phone number before calling back . . . . . . . . . . . . . . . . . . . 28 Storing caller information into the phonebook . . . . . . . . . . . . . . . . . . . 28 Erasing caller information. . . . . . . . . 29

Intercom Features

Intercom . . . . . . . . . . . . . . . . . . . . . . . . 30 For KX-TG2431 users . . . . . . . . . . . 30 For KX-TG2432 users . . . . . . . . . . . 31 Transferring a call (KX-TG2432 only) . . 32 Conference calls (KX-TG2432 only). . . 32

Programmable Settings

Guide to handset programming . . . . . . 33 Ringer settings . . . . . . . . . . . . . . . . . . . 34 Handset ringer volume . . . . . . . . . . 34 Handset ringer tone . . . . . . . . . . . . . 35 Handset interrupt tone . . . . . . . . . . . 35 Call options. . . . . . . . . . . . . . . . . . . . . . 36 Auto talk . . . . . . . . . . . . . . . . . . . . . 36 Voice enhancer . . . . . . . . . . . . . . . . 36 Caller ID edit . . . . . . . . . . . . . . . . . . 36 Display options . . . . . . . . . . . . . . . . . . . 37 Handset LCD contrast . . . . . . . . . . . 37 Display language . . . . . . . . . . . . . . . 37 Telephone settings . . . . . . . . . . . . . . . . 37 Dialing mode . . . . . . . . . . . . . . . . . . 37 Flash time . . . . . . . . . . . . . . . . . . . . 37 Line mode . . . . . . . . . . . . . . . . . . . . 38 Other options . . . . . . . . . . . . . . . . . . . . 38 Handset key tone . . . . . . . . . . . . . . 38 Re-registering the handset . . . . . . . 38 Time adjustment (Caller ID subscribers only) . . . . . . . . . . . . . . . . . . . . . . . . . 39 Customer support . . . . . . . . . . . . . . 39 Programming via direct commands . . . 40 Direct commands chart . . . . . . . . . . 40

Answering System Features

Answering system . . . . . . . . . . . . . . . . 42 Recording your greeting message . . . . 42 Erasing your greeting message . . . 43 Pre-recorded greeting message . . . 43 Turning the answering system on/off . . 43

2

For assistance, please call 1-800-211-PANA (7262).

Table of Contents

Screening your calls . . . . . . . . . . . . 43 Listening to messages . . . . . . . . . . . . . 44

Listening to messages using the base unit . . . . . . . . . . . . . . . . . . . . . . . . . 44 Listening to messages using the handset . . . . . . . . . . . . . . . . . . . . . . 45

Memory capacity . . . . . . . . . . . . . . . . . 46 Remote operation. . . . . . . . . . . . . . . . . 47

Using the answering system

remotely . . . . . . . . . . . . . . . . . . . . . 47 Answering system settings. . . . . . . . . . 48 Remote code . . . . . . . . . . . . . . . . . 48 Ring count . . . . . . . . . . . . . . . . . . . . 49 Caller’s recording time . . . . . . . . . . . 49 Message alert . . . . . . . . . . . . . . . . . 50

Useful Information

Belt clip. . . . . . . . . . . . . . . . . . . . . . . . . 51 Headset (optional) . . . . . . . . . . . . . . . . 51 Wall mounting. . . . . . . . . . . . . . . . . . . . 52 Base unit . . . . . . . . . . . . . . . . . . . . . 52 Charger unit (KX-TG2432 only) . . . . 54 Error messages . . . . . . . . . . . . . . . . . . 55 Troubleshooting . . . . . . . . . . . . . . . . . . 56 General use . . . . . . . . . . . . . . . . . . 56 Programmable settings . . . . . . . . . . 56 Making/answering calls, Intercom . . 57 Phonebook . . . . . . . . . . . . . . . . . . . 57 Caller ID . . . . . . . . . . . . . . . . . . . . . 58 Answering system . . . . . . . . . . . . . . 59 Battery charge . . . . . . . . . . . . . . . . . 60 Power failure . . . . . . . . . . . . . . . . . . 60

Important information about subscription services . . . . . . . . . . . . . . . . . . . . . . . . 61 FCC and other information . . . . . . . . . . 62 openLCR service for the Caller IQ feature . . . . . . . . . . . . . . . . . . . . . . . . . 64 Technical information . . . . . . . . . . . . . . 65

Base unit . . . . . . . . . . . . . . . . . . . . . 65 Handset . . . . . . . . . . . . . . . . . . . . . 65 Charger unit (KX-TG2432 only) . . . . 65 Warranty. . . . . . . . . . . . . . . . . . . . . . . . 67 Customer services . . . . . . . . . . . . . . . . 69

Index

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . 70

For assistance, please call 1-800-211-PANA (7262).

3

Introduction

Accessory information

Included accessories

To order replacement accessories, call 1-800-332-5368.

TTY users (hearing or speech impaired users) can call 1-866-605-1277.

No.

Accessory

Order number

Quantity

 

 

 

KX-TG2431W KX-TG2431G

KX-TG2432W KX-TG2432B

 

items

 

1

AC adaptor

PQLV19Z

1

1

2

2

2

Telephone

PQJA10075Z

1

1

1

1

 

line cord

 

 

 

 

 

3

Wall

PQKL10067Z1

1

1

 

mounting

PQKL10067Z2

1

1

 

adaptor

 

 

 

 

 

 

4

Battery

HHR-P105

1

1

2

2

5

Handset

PQYNTG2421WR

1

2

 

cover

PQYNTG2431GR

1

 

 

 

 

PQYNTG2432BR

2

6

Belt clip

PQKE10393Z1

1

2

 

 

PQKE10393Z2

1

2

7

Charger unit

PQLV30029ZW

1

 

 

PQLV30029ZB

1

1

 

2

3

 

4

 

5

6

7

Additional/replacement accessories

Accessory items

Order number

 

Rechargeable nickel metal

HHR-P105

 

hydride (Ni-MH) battery

 

 

Headset

KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA,

 

 

KX-TCA91, KX-TCA92, or KX-TCA98

 

Battery back-up power supply

KX-TCA200

 

For assistance, please call 1-800-211-PANA (7262).

5

Introduction

Important safety instructions

When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on this unit.

3.Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

4.Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc.

5.Place the unit securely on a stable surface. Serious damage and/or injury may result if the unit falls.

6.Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating.

Never place the unit near radiators, or in a place where proper ventilation is not provided.

7.Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

8.Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.

9.Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

10.Never push any objects through slots in this unit. This may result in the risk of fire or electric shock. Never spill any liquid on the unit.

11.To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks.

Incorrect reassembly can cause electric shock when the unit is subsequently used.

12. Unplug this unit from power outlet29(2)9utpwim

6

For assistance, please call 1-800-211-PANA (7262).

Introduction

LDo not touch the plug with wet hands.

LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible.

Battery

To reduce the risk of fire or injury to persons, read and follow these instructions.

LUse only the battery(ies) specified.

LDo not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions.

LDo not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

LExercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns.

LCharge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

WARNING:

LTo prevent the risk of fire or electrical shock, do not expose this product to rain or any type of moisture.

Medical

LConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 2.4 GHz to 2.48 GHz, and the power output level can range from 0.04 to 0.1 watts.) Do not use

the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

For assistance, please call 1-800-211-PANA (7262).

7

Introduction

For best performance

Base unit location/noise

The base unit and handset use radio waves to communicate with each other. For maximum distance and noise-free operation, we recommend the following:

LPlacing the unit away from electrical appliances such as a TV, personal computer or another cordless phone.

LPlacing the base unit in a HIGH and CENTRAL location with no obstructions such as walls.

LRaising the antenna vertically.

LIf you use the handset near a microwave oven which is being used, noise may be heard. Move away from the microwave oven and closer to the base unit.

LIf you use the handset near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and closer to your base unit.

Environment

LKeep the unit away from electrical noise generating devices, such as fluorescent lamps and motors.

LThe unit should be kept free from excessive smoke, dust, high temperature and vibration.

LThe unit should not be exposed to direct sunlight.

LDo not place heavy objects on top of the unit.

LWhen you leave the unit unused for a long period of time, unplug this unit from power outlet.

LThe unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 5 °C (41 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided.

LThe maximum calling distance may be shortened when the unit is used in the following places: Near obstacles such as hills, tunnels, undergrounds, near metal objects such as wire fences, etc.

LOperating near 2.4 GHz electrical appliances may cause interference. Move away from the electrical appliances.

Routine care

LWipe the outer surface of the unit with a soft cloth. Do not use benzine, thinner or any abrasive powder.

8

For assistance, please call 1-800-211-PANA (7262).

Panasonic KX-TG2432, KX-TG2431 User Manual

Preparation

Connections

Base unit

Fasten the AC adaptor cord.

Hooks

Charger unit (KX-TG2432 only)

To power outlet (120 V AC, 60 Hz)

AC adaptor

Raise the antenna.

To single-line telephone jack (RJ11C)

Telephone line cord

To power outlet (120 V AC, 60 Hz)

AC adaptor

Hooks

Bottom of

 

 

the charger

Fasten the AC adaptor cord to prevent it from being disconnected.

For assistance, please call 1-800-211-PANA (7262).

9

Preparation

Note:

Battery installation

LUse only the included Panasonic AC

adaptor PQLV19.

1 Insert the battery (1), and press it

LThe AC adaptor must remain connected

at all times. (It is normal for the adaptor

down until it snaps into the

to feel warm during use.)

compartment (2).

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a standard telephone to the same

telephone line or to the same telephone 2 Close the handset cover. jack using the Panasonic KX-J66 T-

adaptor. Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 5.

If you subscribe to an xDSL service

LPlease attach a noise filter (contact your xDSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

Noise is heard during conversations.

Caller ID features (page 26) do not function properly.

10

For assistance, please call 1-800-211-PANA (7262).

Preparation

Battery charge

Place the handset on the base unit or charger for 6 hours before initial use.

LThe unit will beep once, the CHARGE indicator will light, and “Charging” will be displayed.

L“Charge completed” is displayed when the battery has been fully charged. The CHARGE indicator will remain lit.

Base unit

CHARGE indicator

Charger unit (KX-TG2432 only)

CHARGE indicator

Note:

LTo ensure the battery charges properly, clean the charge contacts of the handset, base unit, and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust, or high humidity.

Battery strength

You can confirm the battery strength on the handset display.

Battery icon

Battery strength

5

Fully charged

 

 

6

Medium

 

 

7

Low

 

When flashing: needs

 

to be recharged.

8

Discharged

 

 

 

 

Recharging the battery

Recharge the battery when:

Recharge battery” is displayed or 7flashes on the handset display.

the handset beeps intermittently while it is in use.

Note:

LRecharge the handset battery for more than 15 minutes, or the display will continue showing the indication.

LIf the battery has been discharged, the handset will display “Charge for 6h” and 8when you place the handset on the base unit or charger.

For assistance, please call 1-800-211-PANA (7262).

11

Preparation

Battery performance

After your Panasonic battery is fully charged, you can expect the following performance:

Operation

Operating time

While in use

Up to 5 hours

(talking)

 

 

 

While not in use

Up to 11 days

(standby)*1

 

While using the

Up to 3 hours

Clarity Booster

 

feature (page 20)

 

 

 

*1 Handset is off the base unit or charger but not in use.

Note:

LBattery power is consumed whenever the handset is off the base unit or charger, even when the handset is not in use. The longer you leave the handset off the base unit or charger, the shorter you can actually talk on the handset. Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use.

LOnce the battery is fully charged, you do not have to charge it again until “Recharge battery” is displayed or 7flashes. This will maximize the battery life.

Battery replacement

If battery performance diminishes, make sure you have cleaned the charge contacts and fully charged the battery. The battery needs to be replaced if any of the following are displayed after a few phone calls even when you have fully charged the battery.

Recharge battery

7(flashing)

Charge for 6h

8

LUse only the rechargeable Panasonic battery noted on page 5.

1 Press the notch on the cover firmly and slide it as indicated by the arrow.

2 Replace the old battery with a new one, and close the cover (see page 10 for battery installation).

Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY for information on how to recycle this battery.

12

For assistance, please call 1-800-211-PANA (7262).

Preparation

Controls and displays

Controls

Base unit

A B C D E F G H IJ K L

KX-TG2432 KX-TG2431

M

N O P

Q R

A {LOCATOR/INTERCOM 1}

K {GREETING CHECK}

 

B {LOCATOR/INTERCOM 2}

L Display

 

C {LOCATOR/INTERCOM}

M Charge contacts

 

D {<} (Repeat)

N MIC (Microphone)

 

E {>} (Skip)

O CHARGE indicator

 

F Antenna

P VOL. (Volume) {<} {>}

G Speaker

Q {MESSAGE}

 

H {ERASE}

MESSAGE indicator

 

I {GREETING REC} (Recording)

R {ANSWER ON}

 

J {STOP}

ANSWER ON indicator

 

 

 

For assistance, please call 1-800-211-PANA (7262).

13

Preparation

Handset

I

J

A

BK L

C

B

 

D

M

E

 

F

N

 

G

O

 

H

 

 

P

 

Q

ASpeaker

BSoft key

CHeadset jack

D{C} (TALK)

ENavigator key

F{s} (SP-PHONE)

G{*} (TONE)

H{PAUSE}{REDIAL}

IRinger indicator Message indicator

JReceiver

KDisplay

L{MENU}

M{OFF}

N{MUTE} {CLEAR}

O{HOLD} {INTERCOM}

PMicrophone

QCharge contacts

Charger unit (KX-TG2432 only)

A

B

ACharge contacts

BCHARGE indicator

Using the navigator key

The handset navigator key can be used to navigate through menus and to select items shown on the display, by pressing

{^}, {V}, {<}, or {>}.

14

For assistance, please call 1-800-211-PANA (7262).

Preparation

Display

Base unit display items

Displayed

Meaning

item

 

E

Flashes when message

 

memory is full.

 

 

E

Flashes when the date and

 

time need to be set.

 

 

C

Base unit is on an intercom

 

call, or handset is using the

 

answering system.

 

When flashing: base unit is

 

paging or is being paged.

 

 

B

Line is in use.

C

When flashing: a call is on

 

hold or the answering

 

system is answering a call.

 

When flashing rapidly: a

 

call is being received.

 

 

E

Greeting message

 

recording error

 

 

9@

Answering system is in

 

greeting only mode (caller

 

messages will not be

 

recorded).

 

 

H1

Handset number; displayed

 

when paging or being

 

paged. (example shown

 

here: handset 1)*1

*1 KX-TG2432 only

 

 

Handset display items

 

 

Displayed

Meaning

item

 

J

Voice enhancer is on.

 

 

5

Battery strength

 

 

Soft keys

The handset features 2 soft keys. By pressing a soft key, you can select the function displayed directly above it.

LThe functions displayed will vary depending on how you are using the unit.

LWhen a function does not appear above a soft key, the soft key has no function.

Rcvd

Phone

Kcalls

book L

Soft key examples:

Display

Action

function

 

Rcvd

Enters caller list

calls

 

Conf

Establishes a conference

 

call*1

*1 KX-TG2432 only

Backlit display and handset keypad

The handset display and dialing buttons will light for a few seconds after pressing any of the handset’s controls or lifting the handset off the base unit or charger. They will also light when a call is being received.

For assistance, please call 1-800-211-PANA (7262).

15

Preparation

Setting the date and time

Set the date and time so that the unit will announce the day and time each message was recorded by the answering system (page 42) when you play back messages.

1 Press {MENU}.

2 Scroll to “Date and time” by pressing {V} or {^}, then press {>} or {Select}.

Date and time

KBack dB SelectL

3 Enter the current month, day, and year by selecting 2 digits for each. Example: June 15, 2005

Press {0}{6} {1}{5} {0}{5}.

Date:12.31.2005

Time:12:00 AM

KAM/PM SaveL

4 Enter the current hour and minute (12hour clock format) by selecting 2 digits for each.

Example: 9:30 PM

Press {0}{9} {3}{0}.

Date:06.15.2005

Time:12:00 AM

KAM/PM SaveL

5 Select “AM” or “PM” by pressing {AM/ PM}.

Date:06.15.2005

Time:09:30 AM

KAM/PM SaveL

6 Press {Save}.

LWhen the date and time are set, E disappears from the base unit display.

LIf the handset beeps 3 times, the date and time were not set correctly. Enter the correct digits.

7 Press {OFF}.

Note:

LIf you make a mistake when entering the date and time, press {<}, {>}, {V}, or {^} to move the cursor, then make the correction.

LIf a power failure occurs, Ewill flash to indicate the date and time must be set again.

To confirm the date and time

Repeat steps 1 and 2. Press {OFF} when finished.

Time adjustment (Caller ID subscribers only)

When calls are received, Caller ID will automatically adjust the date and time (including daylight saving time).

LIf you have not set the date and time manually, Caller ID will not adjust the date and time.

LYou can turn this feature off (page 39).

16

For assistance, please call 1-800-211-PANA (7262).

Making/Answering Calls

Making calls

 

Soft keys

{C}

{OFF}

Navigator key

{s}

 

{*}

{MUTE}

{CLEAR}

{PAUSE}

{HOLD}

{REDIAL}

Microphone

 

1 Lift the handset and press {C}. L“Talk” will be displayed.

2 Dial the phone number.

3 When finished talking, press {OFF} or place the handset on the base unit or charger.

Note:

L“Line in use” is displayed when someone is talking on the other handset (KX-TG2432 only) or another phone.

To adjust the receiver volume

3 levels (high/medium/low) are available. While using the receiver, press {V} or {^} repeatedly.

To use the speakerphone

1 Lift the handset and press {s}. L“SP-phone” will be displayed.

2 Dial the phone number.

3 When the other party answers, speak into the microphone.

4 When finished talking, press {OFF} or place the handset on the base unit or charger.

Note:

LTalk alternately with the caller in a quiet room.

LIf the other party has difficulty hearing you, press {V} to decrease the speaker volume.

LWhile on a call, you can switch from the receiver to the speakerphone by pressing {s}. To switch back to the receiver, press {C}.

To adjust the speaker volume

6 levels (high to low) are available. While using the speaker, press {V} or {^} repeatedly.

To dial after confirming the entered number

1 Enter the phone number. Example: 3334444

KFlash CallL

LTo correct a digit, press {<} or {>} to move the cursor, then press {CLEAR}. Enter the correct number.

LIf a pause is required when dialing, press {PAUSE} where needed (page 20).

LTo cancel, press {OFF}.

2 Press {C}, {s}, or {Call}.

3 When finished talking, press {OFF} or place the handset on the base unit or charger.

To redial the last number dialed

1 Press {C} or {s}.

2 Press {REDIAL}.

For assistance, please call 1-800-211-PANA (7262).

17

Making/Answering Calls

To make a call using the redial list

The last 5 phone numbers dialed are stored in the redial list.

1 Press {REDIAL}.

LThe last number dialed will be displayed.

2 Press {V} or {^} repeatedly to display the desired number.

LTo delete the displayed number, press {CLEAR}.

LTo exit the list, press {OFF}.

3 Press {C}, {s}, or {Call}.

Answering calls

When a call is being received, the ringer indicator flashes rapidly.

1 Lift the handset and press {C} or {s}.

LYou can also answer a call by pressing any button except {V}, {^},

{<}, {>}, or {OFF}. (Any key talk feature)

2 When finished talking, press {OFF} or place the handset on the base unit or charger.

Auto talk

This feature allows you to answer a call by simply lifting the handset off the base unit or charger. You do not need to press {C}. To activate this feature, see page 36.

Temporary ringer off

While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {OFF}. The handset will ring the next time a call is received.

18

For assistance, please call 1-800-211-PANA (7262).

Making/Answering Calls

Useful features during a call

HOLD button

This feature allows you to put an outside call on hold.

KX-TG2431:

Press {HOLD} during an outside call. L“Hold” will be displayed.

LTo return to the call, press {C} or {s}.

KX-TG2432:

1 Press {HOLD} during an outside call.

LTo transfer the call to the other handset, see page 32, step 2.

2 Press {HOLD} again.

L“Hold” will be displayed.

LTo return to the call, press {C} or

{s}.

LThe other handset user can take the call by pressing {C} or {s}.

Note:

L“Line on hold” will be displayed on the other handset (KX-TG2432 only).

LIf another phone is connected on the same line (page 10), you can also take the call by lifting its handset.

LIf a call is kept on hold for more than 6 minutes, an alarm tone will start to sound and the ringer indicator will flash rapidly. After 4 additional minutes on hold, the call will be disconnected.

MUTE button

You can mute your voice during a conversation. While mute is turned on you will be able to hear the other party, but the other party will not be able to hear you.

To mute your voice, press {MUTE}.

Example: Talk

00-00-30 <Mute>

L“<Mute>” will flash on the display.

LTo return to the conversation, press

{MUTE}, {C}, or {s}.

Voice enhancer

This feature clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand.

1 Press {MENU} during an outside call.

2 To turn this feature on or off, press {3}.

LYou can also select “V.E. on” or “V.E. off” by pressing {V} or {^} then pressing {>}.

g3=V.E. on

4=Caller IQ

LWhen turned on, “J” will be displayed.

Note:

LOnce you turn voice enhancer on, it will be activated for all outside calls until turned off.

LYou can also turn this feature on or off by programming (page 36).

LDepending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off.

For assistance, please call 1-800-211-PANA (7262).

19

Making/Answering Calls

Clarity booster

This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature will be turned on automatically when necessary. This feature will turn off when you hang up or put a call on hold. It will not turn off automatically during a call. You can also turn this feature on or off manually.

1 Press {MENU} during an outside call.

2 Press {2} to select “Booster on” or “Booster off”.

LYou can also select “Booster on” or “Booster off” by pressing {V} or {^} then pressing {>}.

1=Phonebook g2=Booster on

LWhile this feature is turned on, “BOOST” will flash on the display.

Note:

LIf this feature is turned off manually during a call, it will not be turned on automatically during the same call.

LWhile this feature is turned on, battery operating time will be shortened (page 12).

Call share (KX-TG2432 only)

When the other handset is on an outside call, this feature allows you to join that call. To join a conversation, press {C} or {s} when the other handset is on an outside call.

L“Conference” will be displayed.

PAUSE button (for PBX/long distance service users)

A pause is sometimes required when making calls using a PBX or long distance service.

For example, if you need to dial the line access number “9” when making outside calls with a PBX:

1 Press {9}.

2 Press {PAUSE}, then dial the phone number.

Example: 9P15556667777

KFlash CallL

3 Press {C}, {s}, or {Call}.

Note:

LA 3.5 second pause is inserted each time {PAUSE} is pressed. Press repeatedly to insert longer pauses.

Flash button

Pressing {Flash}allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as Call Waiting.

Example: Talk

00-00-20 KFlash

Note:

LTo change the flash time, see page 37.

20

For assistance, please call 1-800-211-PANA (7262).

Making/Answering Calls

For Call Waiting service users

To use Call Waiting, you must subscribe to your telephone company’s Call Waiting service.

This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a Call Waiting tone.

Press {Flash} to answer the 2nd call.

LThe 1st call is put on hold while you answer the 2nd call.

LTo switch between calls, press {Flash}.

Note:

LPlease contact your telephone company for details and availability of this service in your area.

Temporary tone dialing (for rotary/pulse service users)

You can temporarily switch the dialing mode to tone when you need to access touch tone services (for example, answering services, telephone banking services, etc.).

Press {*}(TONE) before entering access numbers which require tone dialing.

Note:

LThe dialing mode will return to pulse when you hang up.

For assistance, please call 1-800-211-PANA (7262).

21

Phonebook

Using the phonebook

The handset phonebook allows you to make calls without having to dial manually. You can add 50 names and phone numbers to the handset phonebook and search for phonebook entries by name.

Adding items to the phonebook

1

Press {Phonebook}.

 

 

 

 

 

 

 

Rcvd

Phone

 

 

Kcalls

book L

2

Press {Add}.

 

 

 

 

 

LThe display shows the number of

 

items in the phonebook.

 

 

Example:

 

 

Phonebook

 

 

7 items

 

 

KAdd

SearchL

3

 

 

Enter the name (max. 16 characters).

 

See the character table for entry.

 

 

 

 

 

Enter name

 

 

|

 

 

 

KBack

NextL

4

Press {Next}.

 

 

 

 

5

Enter the phone number (max. 32

 

digits).

 

 

LIf a pause is required when dialing, press {PAUSE} where needed (page 20).

Enter phone no.

6 Press {Next}.

LIf you want to change the name and number, press {Edit}, then repeat from step 3.

Example: Tom

555-765-4321 KEdit SaveL

7 Press {Save}.

LTo add other items, repeat from step

2.

8 Press {OFF}.

Character table

The dial keys can be used to enter characters. To enter a character, press the appropriate dial key, repeatedly if necessary. To enter another character that is located on the same dial key, first press {>} to move the cursor to the next space.

Key

Characters

 

 

 

{1}

&

(

)

,

. / 1

 

 

 

 

 

 

 

 

{2}

a

b

c

A

B

C

2

 

 

 

 

 

 

 

 

{3}

d

e

f

D

E

F

3

 

 

 

 

 

 

 

 

{4}

g

h

i

G

H

I

4

 

 

 

 

 

 

 

 

{5}

j

k

l

J

K

L

5

 

 

 

 

 

 

 

 

{6}

m

n

o

M

N

O

6

 

 

 

 

 

 

 

 

{7}

p

q

r

s

P

Q

R S 7

 

 

 

 

 

 

 

 

{8}

t

u

v

T

U

V

8

 

 

 

 

 

 

 

{9}

w

x

y

z

W X

Y Z 9

 

 

 

 

 

 

 

{0}

0

Space

 

 

 

 

 

 

 

 

 

 

 

 

{*}

;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

{#}

#

 

 

 

 

 

 

 

 

{CLEAR}

To delete a character or

 

number

 

 

 

 

 

 

 

 

 

 

 

 

To edit/correct a mistake

Press {<} or {>} to move the cursor to the character or number you wish to erase, then press {CLEAR}. Enter the appropriate character or number.

Note:

LPress and hold {CLEAR} to erase all characters or numbers.

22

For assistance, please call 1-800-211-PANA (7262).

Loading...
+ 50 hidden pages