Panasonic HDC-HS900PC, HDC-TM900P, HDC-TM900PC Operating Instruction

Owner’s Manual

High Definition Video Camera

Model No.HDC-TM900P/PC

HDC-HS900P/PC

Before connecting, operating or adjusting this product, please read the instructions completely.

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

VQT3K69

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right.

The serial number is on the tag located on the back of your camera. Be sure to retain this manual as your convenient camera information source.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Safety Precautions

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

≥DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

The following mark and symbols are located on bottom of the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

2

VQT3K69

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥Reorient or relocate the receiving antenna.

≥Increase the separation between the equipment and receiver.

≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

≥Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:	To assure continued compliance, follow the attached installation
	instructions and use only shielded interface cables with ferrite
	core when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Declaration of Conformity

Trade Name:	Panasonic
Model No.:	HDC-TM900P/HDC-HS900P
Responsible party:	Panasonic Corporation of North America
	One Panasonic Way, Secaucus, NJ 07094
Support Contact:	Panasonic Consumer Electronics Company
	1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

HDC-TM900P			HDC-HS900P

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian ICES-003.

3

VQT3K69

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V.

But

≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only.

≥When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.

≥When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited to the voltage of the AC supply and the rated current of the AC adaptor.

≥Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC cord set.

The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it.

To completely disconnect power from the unit, unplug the power cord from the AC power outlet.

∫ Concerning the battery

Batteries

1 Battery pack (Lithium ion battery pack)

≥ Use the specified unit to recharge the battery pack.

≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.

≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire.

2 Button-type battery (Lithium battery)

≥ Insert with poles aligned.

≥ Do not touch the terminals (i and j) with metal objects.

≥ Do not recharge, disassemble, remodel, heat or throw into fire. ≥ Keep out of reach of children.

If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.

If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble.

Do not heat the batteries above the following temperatures or incinerate.

Button-type battery	60 oC (140 oF)
Battery pack	60 oC (140 oF)

4

VQT3K69

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

∫ Product Identification Marking

Product	Location
High Definition Video Camera	Battery holder
AC adaptor	Bottom

U.S.A./CANADA CONSUMERS: ATTENTION:

A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

<For USA-California only>

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

5

VQT3K69

IMPORTANT SAFETY

INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the

cart, stand, tripod, bracket, or table specified by the

manufacturer, or

sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

6

VQT3K69

Precautions

USE & LOCATION

WARNING

≥TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your camera. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your camera from the power supply before cleaning.

≥AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD.

CAUTION

≥DO NOT AIM YOUR CAMERA AT THE SUN OR OTHER BRIGHT OBJECTS

≥DO NOT LEAVE THE CAMERA WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE DAMAGE TO THE INTERNAL PARTS OF THE EVF

≥DO NOT EXPOSE YOUR CAMERA TO EXTENDED HIGH TEMPERATURE ...

Such as, in direct sunlight, inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your camera.

≥AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm place, moisture may form on the SD card and inside the unit.

≥DO NOT LEAVE YOUR CAMERA OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.

≥STORAGE OF YOUR CAMERA ... Store and handle your camera in a manner that will not subject it to unnecessary movement (avoid shaking and striking). Your camera contains a sensitive pick-up device which could be damaged by improper handling or storage.

CARE

≥TO CLEAN YOUR CAMERA ... Do not use strong or abrasive detergents when cleaning your camera body.

≥TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camera lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

≥TO PROTECT THE FINISH OF YOUR CAMERA ... Before handling your camera, make sure your hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

-If you see this symbol-

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

7

VQT3K69

∫About the recording format for recording motion pictures

You can select from AVCHD, 1080/60p or iFrame recording formats to record motion pictures using this unit. (l 57, 67)

AVCHD:

You can record high definition quality images with this format. It is suitable for viewing on a large format TV or for saving to disc.

1080/60p:

This is a 1080/60p (1920k1080/60 progressive) recording mode that can record in maximum quality*. The scenes recorded in 1080/60p can be saved or played back by this unit or the HD Writer AE 3.0.

* This means the highest quality for this unit.

iFrame:

This is a recording format suitable for playing back or editing on Mac (iMovie’11). Using iMovie’11, iFrame motion pictures can be imported faster than AVCHD motion pictures. Also, the imported file size of iFrame motion pictures will be smaller than that of AVCHD motion pictures.

≥It is not compatible with motion pictures recorded in AVCHD or 1080/60p format.

∫Indemnity about recorded content

Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-built-in memory/ HDD related component).

∫Handling of built-in memory [HDC-TM900]

This unit is equipped with the built-in memory. When using this component, pay attention to the following points.

8

Back up data periodically.

The built-in memory is temporary storage. In order to avoid erasing data due to static electricity, electromagnetic waves, breakage, and failures, back up the data to a PC or DVD disc. (l 113, 125)

≥Access lamp [ACCESS] (l 17) illuminates while the SD card or built-in memory is being accessed (initialization, recording, playback, deleting etc.). Do not perform the following operations when the lamp illuminates. It may damage the builtin memory or cause a malfunction in the unit.

jTurn the unit off (remove the battery) jInsert and remove the USB cable

jExpose the unit to vibrations or shock

≥About disposing of or giving away this unit. (l 149)

∫ Handling of HDD [HDC-HS900]

This unit is equipped with the built-in HDD. While the HDD is capable of storing a large amount of data, there are a few things to look out for. When using this component, pay attention to the following points.

Do not expose the HDD to vibrations and shocks.

Due to the environment and handling conditions, the HDD may be subject to partial damages or may not be able to read, record, and play back data. Do not expose the unit to vibrations or shock, and do not turn off the unit during recording or playback.

If the unit is used in a place with loud sounds, such as a club or similar venue, the recording may stop due to sound vibrations. Recording data on an SD card is recommended in these places.

Back up data periodically.

The HDD is temporary storage. In order to avoid erasing data due to static electricity, electromagnetic waves, breakage, and failures, back up the data to a PC or DVD disc. (l 113, 125)

VQT3K69

If the HDD experiences any abnormality, back up data immediately.

Failure in the HDD may produce continuous noise or choppy sound during recording or playing back. Continuous use will cause further deterioration, and may eventually disable the HDD. If these phenomena are observed, copy the data on the HDD to a PC, a DVD disc etc. immediately and contact consumer support. (l 168, 169) Once the HDD is out of order, data cannot be restored.

Operation may stop in hot or cold environments.

The unit is disabled in order to protect the HDD.

Do not use the unit in low atmospheric pressures.

The HDD may fail if it is used at altitudes of 3000 m (9800 feet) or higher above sea level.

Transportation

When the unit is transported, turn off the unit and be careful not to shake, drop, or cause impact to the unit.

Falling detection

[ ] is indicated on the screen when it detects a falling state (a weightless state). If the falling state is detected repeatedly, the unit may stop the recording or playback operation in order to protect the HDD.

≥HDD access lamp [ACCESS HDD] (l 20) illuminates while the HDD is being accessed (initialization, recording, playback, deleting etc.). Do not perform the following operations when the lamp illuminates. It may damage the HDD or cause a malfunction in the unit.

jTurn the unit off (remove the battery) jInsert and remove the USB cable

jExpose the unit to vibrations or shock

≥About disposing of or giving away this unit. (l 149)

∫Cards that you can use with this unit

SD Memory Card, SDHC Memory Card

and SDXC Memory Card

≥4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.

≥Refer to page 26 for more details on SD cards.

∫For the purposes of this owner’s manual

≥SD Memory Card, SDHC Memory Card and SDXC Memory Card are referred to as the “SD card”.

≥Functions that can be used for Motion

Picture Recording Mode:

Functions that can be used for Still Picture Recording Mode:

≥Functions that can be used for Motion

Picture Playback Mode: Functions that can be used for Still Picture Playback Mode:

≥Pages for reference are indicated by an arrow, for example: l 00

This owner’s manual is designed for use with models HDC-TM900 and HDC-HS900 . Pictures may be slightly different from the original.

≥The illustrations used in this owner’s manuals show model HDC-TM900 , however, parts of the explanation refer to different models.

≥Depending on the model, some functions are not available.

≥Features may vary, so please read carefully.

≥Not all models may be available depending on the region of purchase.

9

VQT3K69

Contents
Accessories.............................................	12
Quick Guide.............................................	13
Preparation
Parts identification and handling ..........	17
Power supply...........................................	21
Inserting/removing the battery...........	21
Charging the battery .........................	22
Charging and recording time.............	23
Recording to a card ................................	26
Cards that you can use
with this unit ......................................	26
Inserting/removing an SD card..........	27
Turning the unit on/off............................	28
Turning the unit on and off
with the power button........................	28
Turning the unit on and off
with the LCD monitor/viewfinder .......	28
Selecting a mode ....................................	29
How to use the touch screen .................	29
About the Touch Menu ......................	30
Setting date and time..............................	31

Advanced (Recording)

Zoom in/out function..............................	55
About the zoom speed ......................	55
Ring zoom.........................................	55
Extra Optical Zoom ...........................	55
Image Stabilizer Function ......................	56
1080/60p recording.................................	57
Recording with the Touch function.......	58
Touch function icons .........................	58
Recording functions of
operation icons.......................................	61
Operation icons.................................	61
Recording functions of menus..............	66
Manual recording....................................	82
White balance ...................................	83
Manual shutter speed/iris
adjustment ........................................	84
Recording with Manual focus............	85
Recording 3D video................................	86
Functions not available during
3D recording .....................................	88

		Advanced (Playback)
Basic

Before recording.....................................	32
Selecting a media to record ...................	34
Recording motion pictures ....................	35
Recording still pictures..........................	37
Recording still pictures in
Motion Picture Recording Mode........	38
Intelligent Auto Mode .............................	39
Motion picture/Still picture playback ....	41
Using the menu screen ..........................	44
Using the quick menu .......................	45
Using the Setup Menu ............................	46
Using with the remote control ...............	53
Operation of direction buttons/
OK button..........................................	54

Playback Operations ..............................	89
Motion picture playback using
operation icon ...................................	89
Creating still picture from
motion picture ...................................	90
Highlight&Time frame index..............	90
Repeat playback ...............................	91
Resuming the previous playback......	91
Zooming in on a still picture during
playback (Playback zoom)................	91
Various playback functions ...................	92
Playing back motion pictures/
still pictures by date ..........................	92
Highlight Playback ............................	93
Changing the playback settings and
playing back the slide show ..............	95

10

VQT3K69

Deleting scenes/still pictures ................	96
Dividing a scene
(AVCHD, 1080/60p) ..........................	97
Dividing a scene to partially delete
(iFrame) ............................................	98
Deleting personal information ...........	99
Protecting scenes/still pictures..........	99
DPOF setting .........................................	100
Relay scene combining
[HDC-TM900] .........................................	101
Watching Video/Pictures
on your TV .............................................	103
Connecting with a HDMI mini
cable ...............................................	106
Listening in 5.1 channel sound
(AVCHD, 1080/60p) ........................	106
Connecting with the AV multi
cable ...............................................	106
Playback using VIERA Link™ ..............	107
3D video playback.................................	109
Functions not available during
3D playback ....................................	110
Copy/Dubbing
Copying between SD card and Built-in
Memory/HDD .........................................	111
Connecting a DVD burner to copy to/
play back a disc ....................................	113
Preparing for copying/
playing back ....................................	113
Copying to discs..............................	115
Playing back the copied disc...........	117
Managing the copied disc ...............	118
Dubbing with a Blu-ray disc recorder,
video device, etc. ..................................	119
3D video storage...................................	123

				Preparation
	With a PC
	End User License Agreement .........	127
	What you can do with a PC..................	125
	Operating environment ........................	128
	Installation.............................................	131
	Connecting to a PC ..............................	133
	About the PC display ......................	135		Basic
	Starting HD Writer AE 3.0.....................	136
	Reading the operating instructions
	of the software applications ............	136
	If using Mac...........................................	136
	Others
				Advanced	(Recording)
	Indications	138
	Messages ..............................................	141
	About recovery................................	142
	Troubleshooting ...................................	143
	Cautions for use ...................................	148
	....................................About copyright	154
	Recording modes/approximate			Advanced	(Playback)
	recordable time	155
	Approximate number of recordable
	pictures..................................................	156
	Specifications .......................................	158
	Optional accessories ...........................	163
	Accessory Order Form (For USA and
	Puerto Rico Customers) .................	166		Copy/Dubbing
	Limited Warranty (ONLY FOR U.S.A.
	AND PUERTO RICO).............................	167
	Warranty
	(For Canadian Customers)...................	169
	Index ......................................................	170
	Spanish Quick Use Guide/
	Guía española para el uso rápido .......	172
				With a PC

Others

11

VQT3K69

Accessories

Check the accessories before using this unit.

Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Dec. 2010. These may be subject to change.

Battery pack

VW-VBN130

AC adaptor

VSK0732

AC cable

K2CA2CA00025

Remote control (Built-in battery)

N2QAEC000024

AV multi cable

K1HY12YY0008

USB cable

K1HA05AD0007

Stylus pen

VGQ0C14

≥This is used for operations that are hard to operate with your fingers or performing detailed operations with the touch screen operation. (l 29, 52)

Lens hood

VDW2053

Shoe adaptor

(supplied for HDC-TM900; not supplied for HDC-HS900) VYC0996

CD-ROM

Software

12

VQT3K69

Quick Guide

∫ Inserting the battery

Install the battery by inserting it in the direction shown in the figure.

A Insert the battery until it clicks and locks.

∫ Charging the battery

A DC input terminal

1 Connect the AC adaptor to the DC input terminal.

2 Connect the AC cable to the AC adaptor, then the AC outlet.

≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.

It will turn off when the charging is completed.

∫ Inserting/removing an SD card

Access lamp [ACCESS] A

≥When this unit is accessing the SD card or built-in memory, the access lamp lights up.

1)Open the LCD monitor.

≥ Check that the access lamp has gone off.

2)Open the SD card/terminal cover and insert (remove) the SD card into (from) the card slot.

≥Face the label side B in the direction shown in the illustration and press it straight in as far as it will go.

≥Press the center of the SD card and then pull it straight out.

3)Securely close the SD card/terminal

cover.

≥ Securely close it until it clicks.

13

VQT3K69

∫ Turning the unit on/off

Turning the unit on and off with the power button

Press the power button to turn on the unit.

A The status indicator lights on.

≥To turn off the unit, hold down the power button until the status indicator goes off.

Turning the unit on and off with the LCD monitor/viewfinder

Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD monitor/viewfinder turns off the unit.

To turn on the unit

A The status indicator lights on.

To turn off the unit

B The status indicator goes off.

∫ Selecting a mode

Operate the mode switch to change the mode to , or .

Motion Picture Recording

Mode (l 35)

Still Picture Recording Mode (l 37)

Playback Mode (l 41, 89)

∫ How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.

Touch

Touch and release the touch screen to select icon or picture.

Slide while touching

Move your finger while pressing on the touch screen.

14

VQT3K69

∫ Selecting a media to record

A Touch Menu

Touch Menu

∫

Recording motion pictures

Touch

to display the Touch Menu.

Touch

(left side)/ (right side) of

on

1)

Change the mode to

.

the Touch Menu to switch the operation

2)

Open the LCD monitor or extend the

icons.

viewfinder.

3)

Press the recording start/stop button to

start recording.

A When you begin recording, ; changes to ¥.

			∫ Recording still pictures
	∫ Language selection
			1)	Change the mode to		.
	1)	Touch [MENU], then touch [SETUP] #
			2)	Open the LCD monitor or extend the
		[LANGUAGE].		viewfinder.
	2)	Touch desired language.
			3)	Press the	button fully to take the

picture.

1) Change the mode to or . 2) Select the menu.

MENU : [MEDIA SELECT]

3) Touch the media to record motion pictures or still pictures.

≥ Touch [VIDEO/SD CARD] or [PICTURE/ SD CARD] to record to the SD card.

HDC-TM900

Touch [VIDEO/Built-inMemory] or [PICTURE/Built-inMemory] to record to the built-in memory.

HDC-HS900

Touch [VIDEO/HDD] or [PICTURE/HDD] to record to the HDD.

≥The media is selected separately to motion pictures or still pictures is highlighted in yellow.

4)Touch [ENTER].

15

VQT3K69

∫ Motion picture/Still picture playback

1)	Change the mode to	.
2)	Touch the play mode select icon A.
	ALL
3)	Select the [MEDIA] and [VIDEO/

PICTURE] you wish to play back. ≥ Touch [ENTER].

4)Touch the scene or the still picture to be played back.

ALL

B is displayed when [1080/60p] is touched, is displayed when [AVCHD] is touched or is

displayed when [iFrame] is touched in step 3.

≥To display the next (previous) page: jSlide the thumbnail display upward

(downward) while touching it.

jSwitch the Touch Menu, and then touch (up)/ (down) on the thumbnail scroll lever.

5)Select the playback operation by touching the operation icon.

0h00m15s

C Operation icon

≥Operation icons and screen display will disappear when no function is performed

16

for a specific period of time. To display them again, touch the screen.

(Motion picture playback) 1/;: Playback/Pause 6: Rewind playback

5: Fast forward playback

∫: Stops the playback and shows the thumbnails.

(Still picture playback)

1/;: Slide show (playback of the still pictures in numerical order) start/ pause.

2;: Plays back the previous picture. ;1: Plays back the next picture.

∫: Stops the playback and shows the thumbnails.

VQT3K69

Preparation

Parts identification and handling

	1 2 3 4 5	6	1	Speaker
			2	Power button [		] (l 28)
			3	Inlet (cooling fan) (l 32)
			4	Intelligent auto/Manual button
				[iA/MANUAL] (l 39, 82)
			5	Optical image stabilizer button
				[	O.I.S.] (l 56)
			6	Eyepiece corrector dial (l 33)
			7	1080/60p button [1080/60p] (l 57)
			8	Battery release lever [BATT] (l 21)
	7 8 9		9	Battery holder (l 21)
			10	HDMI mini connector [HDMI]
		10		(l 103, 107)
			11	USB terminal [		] (l 114, 119, 133)
		11	12	AV multi connector (l 103, 122)
		12	≥ Use the AV multi cable (only the supplied
			cable).
			13	Card slot (l 27)
			14	Access lamp [ACCESS] (l 27)

14 13

15

16

17

18

19

20

21

22

23

15 Lens cover

≥The lens cover opens in Motion Picture Recording Mode or Still Picture Recording Mode. (l 29)

16Multi manual ring (l 82, 85)

17Camera function button [CAMERA FUNCTION] (l 82)

18Remote control sensor (l 54)

19Built-in flash (l 63)

203D Conversion Lens attachment part (concave) (l 86)

21Lens (LEICA DICOMAR)

≥Please refer to page 33 for details about attaching the lens hood.

22AF assist lamp (l 81)

23Recording lamp (l 49)

17

VQT3K69

24 LCD monitor (Touch screen) (l 29)

24 25

≥ It can open up to 90o.

26 27

≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.

Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.

25 Viewfinder (l 33)

Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the viewfinder screen. However, this is not a malfunction and does not affect the recorded picture.

26 Zoom buttons (l 55)

27 Sub recording start/stop button (l 32)

≥ This button functions in the same manner as the recording start/stop button.

28 Tripod receptacle

≥ If you attach a tripod which has 5.5 mm (0.22 q) screw or larger, it may damage this unit.

28

18

VQT3K69

MIC

313233 34 35

36 37 38

29 Microphone terminal [MIC]

≥A compatible plug-in powered microphone 29 can be used as an external microphone.

≥Audio will be stereo (2 ch) with the

30external microphone input.

≥ (Microphone input level meter) is displayed when the external microphone is connected. (l 75)

≥When the unit is connected with the AC adaptor, sometimes noise may be heard depending on the microphone type. In this

case, please switch to the battery for the power supply and the noise will stop.

30 Headphone terminal [ ] (l 65)

31 Photoshot button [ ] (l 37)

32 Zoom lever [W/T] (In Motion Picture Recording Mode or Still Picture Recording Mode) (l 55)

Thumbnail display switch [ / ]/ Volume lever [sVOLr] (In Playback

Mode) (l 42)

33Mode switch (l 29)

34Status indicator (l 28)

35Internal microphones

36Recording start/stop button (l 35)

37Shoulder strap fixture

38Grip belt

Adjust the length of the grip belt so that it fits your hand.

1 Flip the belt.

2 Adjust the length.

3 Replace the belt.

19

VQT3K69

HDC-TM900

HDC-HS900

39

40 41

42

39Shoe adaptor mount (l 165)

40Shoe adaptor cover (l 165)

41Shoe adaptor release lever

[SHOE ADAPTOR RELEASE] (l 165)

42DC input terminal [DC IN] (l 22)

≥Do not use any other AC adaptors except the supplied one.

20

43 44

45

43HDD access lamp [ACCESS HDD]

44Accessory shoe (l 165)

45DC input terminal [DC IN] (l 22)

≥Do not use any other AC adaptors except the supplied one.

VQT3K69

Preparation

Power supply

∫ About batteries that you can use with this unit

The battery that can be used with this unit is VW-VBN130/VW-VBN260.

≥The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBN130/VW-VBN260) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.

It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

Inserting/removing the battery

≥ Press the power button to turn off the unit. (l 28)

Install the battery by inserting it in the direction shown in the figure.

Removing the battery

Be sure to hold down the power button until the status indicator goes off. Then remove the battery while supporting the unit to prevent it from dropping.

Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked.

A Insert the battery until it clicks and locks.

BATT

21

VQT3K69

Connect the AC cable to the AC adaptor, then the AC outlet.

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.

Important:

≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.

≥Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit.

≥The battery can also be charged using a battery charger (VW-BC20PP; optional).

≥The battery will not be charged if the unit is turned on.

≥It is recommended to charge the battery in a temperature between 10 °C to 30 °C (50 °F to 86 °F). (The battery temperature should also be the same.)

A DC input terminal

≥ Insert the plugs as far as they will go.

1 Connect the AC adaptor to the DC input terminal.

2

≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.

It will turn off when the charging is completed.

∫ Connecting to the AC outlet

If you turn on the unit while connecting the AC adaptor, you can use the unit with power supplied from the outlet.

≥If the status indicator flashes at a particularly fast or slow rate, refer to page 151.

≥We recommend using Panasonic batteries (l 12, 23, 24, 163).

≥If you use other batteries, we cannot guarantee the quality of this product.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

22

VQT3K69

Charging and recording time

∫ Charging/Recording time

≥Temperature: 25 oC (77 oF)/humidity: 60%RH

≥When using the viewfinder (times in parentheses are when using the LCD monitor)

HDC-TM900

	Battery model number	Charging	Recording	Maximum	Actual
	[Voltage/Capacity			continuous	recordable
		time	mode
	(minimum)]			recordable time	time
			[1080/60p]	1 h 30 min	55 min
				(1 h 25 min)	(55 min)
	Supplied battery/		[HA]	1 h 35 min
				(1 h 30 min)	1 h
	VW-VBN130 (optional)	2 h 30 min
			[HG], [HX],	1 h 35 min	(55 min)
	[7.2 V/1250 mAh]
			[HE]	(1 h 35 min)
			[iFrame]	1 h 40 min	1 h
				(1 h 35 min)	(1 h)
			[1080/60p]	2 h 55 min	1 h 45 min
				(2 h 50 min)	(1 h 45 min)
			[HA]	3 h 5 min
	VW-VBN260 (optional)			(3 h)	1 h 55 min
		4 h 30 min
	[7.2 V/2500 mAh]		[HG], [HX],	3 h 10 min	(1 h 50 min)
			[HE]	(3 h)
			[iFrame]	3 h 15 min	2 h
				(3 h 10 min)	(1 h 55 min)

23

VQT3K69

HDC-HS900

	Battery model				Maximum	Actual
	number	Charging	Recording	Recording	continuous
						recordable
	[Voltage/Capacity	time	destination	mode	recordable
						time
	(minimum)]				time
				[1080/60p]	1 h 15 min	45 min
					(1 h 10 min)	(45 min)
			HDD	[HA], [HG],	1 h 20 min	50 min
				[HX], [HE]	(1 h 15 min)	(45 min)
	Supplied battery/			[iFrame]	1 h 20 min	50 min
					(1 h 20 min)	(50 min)
	VW-VBN130	2 h 30 min
					1 h 15 min	45 min
	(optional)			[1080/60p]
					(1 h 15 min)	(45 min)
	[7.2 V/1250 mAh]
				[HA], [HG]	1 h 20 min	50 min
			SD			(45 min)
					(1 h 20 min)
				[HX], [HE]		50 min
					1 h 25 min
				[iFrame]		(50 min)
					(1 h 20 min)
				[1080/60p]	2 h 25 min	1 h 30 min
					(2 h 20 min)	(1 h 25 min)
			HDD	[HA], [HG],	2 h 35 min	1 h 35 min
				[HX], [HE]	(2 h 30 min)	(1 h 30 min)
				[iFrame]	2 h 40 min	1 h 40 min
					(2 h 35 min)	(1 h 35 min)
	VW-VBN260
					2 h 30 min	1 h 30 min
	(optional)	4 h 30 min		[1080/60p]
					(2 h 25 min)	(1 h 30 min)
	[7.2 V/2500 mAh]
				[HA]		1 h 35 min
					2 h 40 min	(1 h 35 min)
			SD
				[HG], [HX],	(2 h 35 min)	1 h 40 min
				[HE]		(1 h 35 min)
				[iFrame]	2 h 45 min	1 h 40 min
					(2 h 40 min)	(1 h 40 min)

24

VQT3K69

≥These times are approximations.

≥The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/low temperature.

≥Recordable time of 3D recording mode is the same.

(During 3D recording mode, 1080/60p and iFrame recording mode cannot be used.)

≥The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc.

≥The batteries heat up after use or charging. This is not a malfunction.

Battery capacity indication

≥The display changes as the battery capacity reduces.

# # # #

If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash.

≥The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use.

≥When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown.

25

VQT3K69

Preparation

Recording to a card

The unit can record still pictures or motion pictures to an SD card, built-in memory or HDD. To record to an SD card, read the following.

This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, check the equipment is compatible with these memory cards.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.

	Card type	Capacity	Motion picture recording	Still picture
				recording
		8 MB/16 MB/	Cannot be used.	Cannot be
		32 MB
	SD			guaranteed in
		64 MB/128 MB/
			Cannot be guaranteed in operation.	operation.
	Memory
		256 MB
	Card
		512 MB/1 GB/
		2 GB
	SDHC	4 GB/6 GB/8 GB/
	Memory	12 GB/16 GB/	Can be used.	Can be used.
	Card	24 GB/32 GB
	SDXC
	Memory	48 GB/64 GB
	Card

	* SD Speed Class Rating is the speed	e.g.:
	standard regarding continuous writing.
	Check via the label on the card, etc.

≥Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC Memory Cards that can be used for motion picture recording on the following website.

http://panasonic.jp/support/global/cs/e_cam

(This website is in English only.)

≥4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.

≥When the write-protect switch A on SD card is locked, no recording,

deletion or editing will be possible on the card.

≥ Keep the Memory Card out of reach of children to prevent swallowing.

32

26

VQT3K69

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 51) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Caution:

Check that the access lamp has gone off.

Access lamp [ACCESS] A

≥ When this unit is accessing the SD card or built-in memory, the access lamp lights up.

1

2

Open the LCD monitor.

Open the SD card/terminal cover and insert (remove) the SD card into (from) the card slot.

		≥ Face the label side B in the direction
		shown in the illustration and press it
		straight in as far as it will go.
		≥ Press the center of the SD card and then
		pull it straight out.

3 Securely close the SD card/ terminal cover.

≥ Securely close it until it clicks.

≥Do not touch the terminals on the back of the SD card.

≥Do not apply strong shocks, bend, or drop the SD card.

≥Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card.

≥When the card access lamp is lit, do not: jRemove the SD card

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock Performing the above while the lamp is on may result in damage to data/SD card or this unit.

≥Do not expose the terminals of the SD card to water, dirt or dust.

≥Do not place SD cards in the following areas:

jIn direct sunlight

jIn very dusty or humid areas jNear a heater

jLocations susceptible to significant difference in temperature (condensation can occur.)

jWhere static electricity or electromagnetic waves occur

≥To protect SD cards, return them to their cases when you are not using them.

≥About disposing of or giving away the SD card. (l 152)

27

VQT3K69

Preparation

Turning the unit on/off

You can turn the unit on and off using the power button, the LCD monitor or the viewfinder.

A clicking sound is heard when the unit is shaken.

≥This is the sound of the lens moving and is not a defect.

This sound will no longer be heard when the unit is turned on and change the mode to

or .

Turning the unit on and off with the power button

Press the power button to turn on the unit.

To turn off the unit

Hold down the power button until the status indicator

goes off.

A The status indicator lights on.

Turning the unit on and off with the LCD monitor/ viewfinder

Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD monitor/viewfinder turns off the unit.

During general use, you may find it convenient to turn the unit on/off using the LCD monitor or viewfinder.

∫ To turn on the unit

∫ To turn off the unit

A The status indicator lights on.

B The status indicator goes off.

≥The unit will not turn off unless the LCD monitor is closed and the viewfinder is retracted.

≥The unit will not turn off while recording motion pictures even if the LCD monitor is closed and the viewfinder is retracted.

28

VQT3K69

≥In the following cases, opening the LCD monitor or extending the viewfinder does not turn on the unit. Press the power button to turn on the unit.

jWhen the unit is originally purchased

jWhen you have turned off the unit using the power button

Preparation

Selecting a mode

Change the mode to recording or playback.

Operate the mode switch to change the mode to , or .

Motion Picture Recording Mode (l 35)

Still Picture Recording Mode (l 37)

Playback Mode (l 41, 89)

Preparation

How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger.

It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.

∫ Touch

Touch and release the touch screen to select icon or picture.

≥ Touch the center of the icon. ≥ Touching the touch screen will not operate while

you are touching another part of the touch screen.

29

VQT3K69

∫ Slide while touching

Move your finger while pressing on the touch screen.

∫ About the operation icons

/ / / :

These icons are used to switch the menu and thumbnail display page, for item selection and setting etc.

:

Touch to return to the previous screen such as when setting menus.

About the Touch Menu

Touch (left side)/ (right side) of on the Touch Menu to switch the operation icons.

Touch (left side)/ (right side) of on the Touch Menu.

≥It is also possible to switch the operation icons by sliding the Touch Menu right or left while touching it.

A Touch Menu

Recording Mode

Playback Mode

	IRIS	MENU	MENU

B Touch these icons to switch pages upward or downward.

C Displayed only during the Manual Mode.

30

VQT3K69