Panasonic C32CT, FP0T32CP, E16P, T32CT, E16T User Manual

...
0 (0)

FP0 Series

Programmable Controllers

07/2007

FConP0trol FPWIN– SupPro er Compact PLC

InPLCcreProgrdibly aSmmalling, AlSoonfte worarEve ceonnaformsMuingltiptloe IEC61131Combined-3Units

From I/O 10-points…

MM

Actual

size

«ÕÌÉ ÕÌ«ÕÌÊÌiÀ >

 

MM

4HEHPHOTOPSHOWSTAOCONTROLO

 

 

 

UNIT WITH ) /S

 

 

 

 

 

 

4HIS SIZE IS UNIFORM FOR

 

 

 

ALLLEXCEPT THE ) / POINTE

 

 

 

CONTROLTUNIT

 

 

 

3UPPLY VOLTAGE V 6$#

 

 

 

/"" Ê« ÀÌ

 

 

 

 

 

 

 

 

(OOKSOUP BY USING THEYPROGRAMMING

 

 

 

SOFTWARE #ONTROLT&07).L0RO

 

 

 

ANDNADSINGLE CABLE

 

 

 

 

 

 

 

 

COM port: 2nd RS232C interface

 

 

 

(optional for all CPU units for serial communication)

Compact size

A control unit a mere 25mm* in width. Even expanded to 128 I/O points, the width is still only 105mm. The attachment area is one of the smallest in its class.

The FP0 offers a compact design that breaks all previous

Choose among 3 types of attachment

common sense rules on small-scale PLCs. With one of

 

 

 

the smallest-ever attachment area, the FP0 is perfect for

 

 

 

installation in machines, facilities, and control boards where

 

 

 

miniaturization is progressing even further.

 

 

 

*30mm width for control units with 32 I/Os.

 

 

 

 

DIN rail

Slim attachment plate

Flat attachment plate

 

 

model

model (cannot be used with

 

 

 

expansions)

2

07/2007

 

Panasonic C32CT, FP0T32CP, E16P, T32CT, E16T User Manual

Either 10 Points or the Maximum of 128 Points

You Save This Much Space!

…up to 128 I/Os

 

 

MM

 

 

 

Networking:

 

 

 

 

 

 

 

- ETHERNET

 

 

 

 

 

 

#ONTROLTUNIT

%XPANSIONNUNIT

%XPANSIONNUNIT

%XPANSIONNUNIT

 

- Modbus

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- PROFIBUS

 

 

 

 

 

 

 

- S-LINK

 

 

 

 

 

 

 

- MEWNET-F

 

 

 

 

 

 

 

Analogue modules featuring different

 

 

 

 

 

 

 

numbers of input and output channels

 

 

 

 

 

 

 

Programming software:

 

 

 

 

 

 

 

- Control FPWIN Pro according

 

 

 

 

 

 

 

to IEC 61131-3

 

 

 

 

 

 

 

- Control FPWIN GR easy,

 

 

 

 

 

 

 

conventional programming

 

 

 

 

 

 

 

4HEHPHOTOPILLUSTRATESIADDING

 

 

 

 

 

 

 

THREER POINT ) / EXPANSION

 

 

 

 

 

 

 

UNITSITO AN POINT ) / CONTROL

 

 

 

 

 

 

 

UNIT IYIELDING POINTS

 

 

 

 

 

 

 

3UPPLY VOLTAGE 6$#

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Easy expansion

The expansion unit can be attached easily without any cables.

The expansion unit can easily be attached directly to the control unit. Special expansion cables, backplanes and so forth are unnecessary as the expansion unit employs a

stacking system that uses expansion connectors and locking levers on the surface of the unit itself.

iV>ХГiК vК МГКГХ«iАКV «>VМКГ Г iК> `К } КV>«>L М iГ]К М iКХ МГК>АiКХГivХ К К>К `iК >А iМЮК vК>«« V>М Г°

2ELAYLSEQUENCE

)N HOUSE DETECTORS

#ONVEYER CONTROL

REPLACEMENT

 

 

0ARTSRFEEDERS

&OOD PROCESSINGOANDE 0ARKINGKMETERS

 

PACKAGINGAMACHINES

!UTO STOCKERS $RIVINGVRANGE

Control Expansion Expansion Expansion

unit

unit

unit

unit

(Maximum possible expansion is three units)

07/2007

3

 

FP0 CPU Units

A Rich Line-Up of Both Single and Combined Units

Control units

Relay output type

Transistor output type

10 points

 

10 points

 

14 points

 

14 points

 

16 points

 

 

16 points

 

32 points

 

 

32 points

 

Input

Output

 

 

Input

Output

 

Input

 

Output

 

Input

Output

 

Input

Output

 

 

Input

Output

 

 

Input

Output

 

 

Input

Output

 

6 points

4 points

 

 

6 points

4 points

 

8 points

 

6 points

 

8 points

6 points

 

8 points

8 points

 

 

8 points

8 points

 

16 points

16 points

 

 

16 points

16 points

 

FP0-

C10RSA

 

 

FP0-C10CRSA

 

FP0-

 

C14RSA

 

FP0-C14CRSA

 

FP0-C16PA (PNP)

 

 

FP0-C16CPA (PNP)

FP0-C32PA (PNP)

 

 

FP0-C32CPA (PNP)

 

 

 

 

with 2nd RS232C

 

 

 

 

 

with 2nd RS232C

 

FP0-C16TA (NPN)

 

FP0-C16CTA (NPN)

 

FP0-C32TA (NPN)

 

 

FP0-C32CTA (NPN)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with 2nd RS232C

 

 

 

 

with 2nd RS232C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control unit 10k

 

 

 

 

 

 

 

 

 

AC power supply

 

 

 

 

 

 

 

 

FP0-T32C

 

 

This advanced FP0 CPU

 

 

FP0-PSA2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

offers additional features:

 

 

10,000 steps program memory

 

 

Battery backed RAM

 

 

Real-time clock

 

 

16383-word

32 points

data register

Input

Output

 

16 points

16 points

 

FP0-T32CPA (PNP)

FP0-T32CTA (NPN) with 2nd RS232C

Input

Output

85 to 265VAC

24VDC/0.7A

Terminal type

Expansion combinations

A maximum of 3 expansion units can be added to the control unit. (Combining relay output types and transistor output types is also possible. In this event, the maximum number of I/O points when using a relay output type control panel is 110.)

Combinations with transistor output type – Examples

­

/ Ì> Ê Õ LiÀ

®

 

r

­ #ONTROLTUNIT ®

³

­

%XPANSIONNUNIT

®

³

­

%XPANSIONNUNIT

®

 

³

­

%XPANSIONNUNIT

®

 

vÊ É"Ê« ÌÃ

 

8 9

8 9

 

8 9

 

 

 

 

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

{n

 

 

r

 

ÎÓ

 

 

 

£È

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

£È

 

 

 

ÎÓ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

È{

 

 

 

ÎÓ

 

 

 

ÎÓ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

³

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

n

 

 

 

ÎÓ

 

 

 

ÎÓ

 

 

 

 

 

£È

 

 

 

 

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

³

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

£È

 

 

 

ÎÓ

 

 

 

 

 

ÎÓ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

³

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

È

 

 

 

ÎÓ

 

 

 

ÎÓ

 

 

 

 

 

ÎÓ

 

 

 

 

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

 

³

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

 

 

 

 

 

£È

 

 

 

 

ÎÓ

 

 

 

 

 

ÎÓ

 

 

 

 

 

£È

 

 

 

 

 

 

 

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

 

³

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

££Ó

 

 

 

ÎÓ

 

 

 

 

ÎÓ

 

 

 

 

 

ÎÓ

 

 

 

 

 

 

£È

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

r

 

 

 

 

 

³

 

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

 

³

 

 

 

 

 

 

 

 

£Ón

 

 

 

ÎÓ

 

 

 

 

 

ÎÓ

 

 

 

 

 

 

ÎÓ

 

 

 

 

 

 

 

ÎÓ

 

 

)NPUTP

 

/UTPUT

 

)NPUTP

 

/UTPUT

 

 

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

 

)NPUTP

 

/UTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

07/2007

 

FP0 Expansion Units

Choose the Number of I/O Points to Suit the Application

Digital I/O units

Relay output type Input only type Transistor output type

8 points

 

16 points

 

32 points

 

8 points

 

16 points

 

8 points

 

16 points

 

16 points

 

32 points

Input

Output

 

Input

Output

 

Input

Output

 

Input

 

Input

 

Output

 

Input

Output

 

Output

 

Input

Output

4 points

4 points

 

8 points

8 points

 

16 points

16 points

 

8 points

 

16 points

 

8 points

 

8 points

8 points

 

16 points

 

16 points

16 points

FP0-

E8RSA

 

FP0-

E16RSA

 

FP0-

E32RS

 

FP0-E8XA

 

FP0-E16XA

 

FP0-E8YPA (PNP)

 

FP0-E16PA (PNP)

 

FP0-E16YPA (PNP)

 

FP0-E32PA (PNP)

Option:

 

 

 

 

 

 

 

 

 

 

 

FP0-E8YTA (NPN)

 

FP0-E16TA (NPN)

 

FP0-E16YTA (NPN)

 

FP0-E32TA (NPN)

Output 8 points

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FP0-E8YRSA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analogue I/O units Thermocouple and RTD units

 

3 points

 

4 points

 

4 points

 

8 points

 

Input

Output

 

Output

 

Output

 

Input

 

2 points

1 points

 

4 points

 

4 points

 

8 points

 

FP0-A21A

 

FP0-A04I

 

FP0-A04V

 

FP0-A80A

 

• Input (12-bit):

 

 

! 10V, ! 100mV

 

! 10V, 0

– 5V,

 

 

0 – 5V, 0 – 20mA

 

0 – 20mA

 

 

• Output (12-bit):

 

4 – 20mA

 

! 10V

 

! 10V, 0

– 20mA

 

 

 

4 points

 

8 points

 

6 points

 

Input

 

Input

 

Input

 

4 points

 

8 points

 

6 points

 

FP0-TC4

 

FP0-TC8

 

FP0-RTD6

 

• K, J, T, R type

thermocouples can

 

• Pt100, Pt1000,

 

be used

 

 

Ni1000

 

• Resolution: 0.1°C

 

 

• Temperature

 

• Accuracy: 0.8°C (R type: 3°C)

 

range:

 

• Temperature range:

 

 

-200 to 500°C

 

-100 to 1500°C

 

 

 

 

Networking units

MEWNET-F

 

S-LINK CPU

 

ETHERNET

 

PROFIBUS

FP0-IOL

 

FP0-SL1

 

FP WEB D

 

FP0-DPS2

(MEWNET-F Slave)

 

(S-LINK Master)

 

(Web-Server Unit)

 

(DP Slave)

07/2007

5

 

FP0 – Impressive Capabilities

High Specifications for Both Speed and Capacity

0.9µs per basic instruction. Pulse catch and interrupt input functions meet the need for high-speed response.

High-speed execution

Execution speed of 0.9µs per basic instruction. 500 step programme yields a scanning time of 1ms.

 

 

 

 

 

 

 

 

 

 

SCAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

) /

 

0ROGRAM

 

) /

 

0ROGRAM

 

) /

 

0ROGRAM

 

 

 

 

 

 

 

 

 

 

 

REFRESH

 

EXECUTION

 

REFRESH

 

EXECUTION

 

REFRESH

 

EXECUTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

)NTERNAL PROCESSINGPIN THE &0

Internal processing in the FP0

Pulse catch function

Can read pulses as short as 50µs, which facilitates sensor input.

 

) /

 

 

0ROGRAM

 

) /

 

0ROGRAM

 

REFRESH

 

 

EXECUTION

 

REFRESH

 

EXECUTION

 

 

 

 

 

 

 

 

 

 

 

 

 

3ENSOR INPUT

 

 

 

 

 

 

#ANNOT

 

 

 

 

 

 

 

 

SIGNAL

 

 

 

 

 

 

 

 

READ

 

 

 

 

 

 

 

 

 

Ì Ê«Õ ÃiÊV>ÌV ÊvÕ VÌ

 

 

>

 

 

,ENGTHENING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OF SENSOR

 

 

 

 

 

 

 

Ài>`t

 

 

 

 

 

 

 

 

INPUTPSIGNAL

 

 

 

 

 

 

 

 

Interrupt input function

Accurate processing, unaffected by scan time

 

 

 

)NTERRUPT

 

 

ÌiÀÀÕ«ÌÊ«À }À> ÊiÝiVÕÌi`ÊÜ i

 

 

 

PROGRAM

 

 

ÌiÀÀÕ«ÌÊ «ÕÌÊi ÌiÀðÊ

)NTERRUPTRINPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

) /

 

0ROGRAM

 

) /

 

0ROGRAM

 

 

REFRESH

 

EXECUTION

 

REFRESH

 

EXECUTION

 

 

 

 

 

 

 

 

 

 

 

)NTERNAL PROCESSINGPIN THE &0

Pulse catch function

Interrupt input function

Large capacity

A 5kand 10k-step programme capacity housed within a compact body. Furthermore, data capacity for internal devices like the data register is also ample. The unit's performance can even handle complicated control tasks.

 

 

ÌÀ ÊÕ ÌÊÌÞ«i

 

 

) / POINT POINT POINT TYPE

) / POINT TYPE

&0 4 #0 4

0ROGRAMMERSIZE

STEPS

STEPS

STEPS

)NTERNAL RELAYS

 

POINTS

 

4IMERS #OUNTERS

 

POINTS

 

$ATA REGISTERS

WORDS

WORDS

WORDS

6

07/2007

 

FP0 – Impressive Capabilities

FP0 Functions

Equipped with 2-axis independent positioning and high-speed counter for support of PWM output.

Pulse output function

The unit comes equipped with 2 channels for the output of up to 10kHz pulses (5kHz during 2-channel output). Since these two channels can be separately controlled, the PLC is also suitable for independent 2- axis positioning. Setting automatic trapezoid control, automatic return to home position and JOG operation are made very easy by using instructions specially designed for such operations.

(For transistor output type only.)

Y0

Pulse output

 

 

 

 

 

 

 

 

 

Motor

 

Stepping motor

 

 

 

 

 

 

Clockwise output/

 

 

Y2

counter-clockwise output

 

driver 1

 

Servo motor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Y1

Pulse output

 

 

 

 

 

 

 

 

 

Motor

 

Stepping motor

 

 

 

 

 

 

Clockwise output/

 

 

 

 

 

 

counter-clockwise output

 

driver 2

 

Y3

 

 

 

 

 

 

 

 

 

 

 

 

Servo motor

 

 

 

 

 

 

 

 

 

 

 

 

Positioning control is a breeze with the auto trapezoid control command!

High-speed counter function

The high-speed counter is designed to use 4 channels in single-phase operation or

2 channels in 2-phase operation. In single phase operation, the total speed for all 4 channels is 10kHz, in 2-phase operation the 2-channel total is 2kHz total speed, making the unit suitable for conveyer control, inverter control and so forth using an encoder.

 

Feeder roller

Cutter

 

 

Lead wiring,

 

Inverter

tape

Motor

 

 

START/STOP

 

Encoder

signal

Cutter blade

Encoder output

control signal

 

inputted into

 

high-speed counter

 

PWM output function

Its PWM (Pulse Width Modulation) output function makes it possible to provide temperature control with a single compact FP0 unit. (For transistor output type only.)

# When pulse width values are increased…

# When reduced…

 

 

power up

 

 

 

 

 

 

 

 

Heater

 

 

 

 

 

 

 

 

Heater

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

# When reduced…

 

 

 

power up

 

 

 

 

 

 

 

 

power down

Serial communication function

• The FP0’s second RS232C port (types C10CRS, C14CRS, C16C, C32C, and T32C) allows direct connection to computers and operation display panels. Also, bi-directional data communication with barcode readers and other RS232C devices is made easy.

• Both the relay type and transistor output type control units can be optionally

equipped with a 2nd RS232C port.

FP0

# For connecting to computers and operation display panels

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Host computer

Operation

(Personal computer)

display panel

# For data communication with RS232C devices

Imagechecker

Bar code reader

Serial printer

Analogue control function

Analogue control is made simple with four types of analoque modules featuring different numbers of input and output channels.

Also, despite its small size, the I/O resolution is a high 1/4000 (12 bits). Support various I/O ranges by setting the DIP switches on the analogue I/O unit for simple operation.

0RESSURE SENSOR

,ASER ANALOGUE

SENSOR

25.

 

02/'

-/$%

 

 

%22/2

 

 

!,!2-

 

 

25.

/&&& &/.

02/'

 

 

66

 

))

).

 

 

))

 

6

/54

)

 

#/-

* ÊÊÓ£

)NVERTER

0OTENTIOMETER

07/2007

7

 

FP0 Communication

Serial Int erf aces and Modem Compatible

Communication – Simple and efficient via two serial interfaces: TOOL port and COM port (RS232C interface).

Programming interface TOOL port (also for communication)

In MEWTOCOL-COM Slave mode, this port offers access to the entire FP0 memory area. For example during data exchange between a host PC running SCADA software and an FP0 PLC, the Windows® based FP OPC Server assumes total control of the communications protocol (MEWTOCOL.COM). Therefore the user can disregard the allocation of data ranges and transfer parameters, because there is no additional programming required. The programmer is thus free to concentrate exclusively on the project application requirements.

Communication Interface COM port

(Flexible with two modes of operation, MEWTOCOL-COM Slave (Computer Link) and Program controlled (General purpose))

In addition to the MEWTOCOL-COM Slave (Computer Link) communication possibilities described above, the optional, integrated RS232C COM port in the FP0 CPU modul (types FP0-C10CRS, FP0-C14CRS, FP0-C16C, FP0-C32C and FP0-T32C) offers flexible programme control (General purpose). In this configuration it is possible to realise communication connections with various peripheral devices via RS232, e.g. bar code readers, slave devices, printers, measurement sensors, telecommunication transmitters, etc.

Communication interface COM port

Freely programmable RS232C interface for CPU modules type FP0-C10CRS,

FP0-C14CRS, FP0-C16C, FP0-C32C and FP0-T32C

Programming interface TOOL port

For programming or additional master/slave communication using

MEWTOCOL COM (Panasonic protocol)

Modem compatible

Even modem communication function is built into this compact body. Using a single telephone line, programming maintenance can be carried out in remote facilities. With C-NET, multiple FP0 units can be connected.

1:1 communication 1:N communication

Multidrop communication

8

07/2007

 

FP0 Communication

Easier Maint enance Than Ever Before

Maintenance saving

Program memory uses EEPROM. In addition, programmes can be changed even in RUN mode!

Overwrite function in RUN mode

It is possible to overwrite a program while the FP0 is running, such as during program debugging and startup adjustments.

Backup battery unnecessary

The program memory uses EEPROM. The program and device contents can be stored without a backup battery, and even programming for a machine builder is safe.

Password function

A password function can be set in order to change a program. Limited to people authorised to make programme changes, protection can be guaranteed better than ever.

Input/output verification LED

Every unit is equipped with LED I/O indicators housed within a compact body. Input/output status can be verified at a glance.

Simple installation

Comes with either terminal block or MIL connector, simplifying wiring.

Terminal block

MIL connector

The terminal type can be plugged straight in without resorting to crimping (made by Phoenix Contact Co.). Can handle wires from

0.3 to 1.25mm2.

MIL connectors can be used with 16-point and 32-point units. Due to the loose-wiring, pressure contact type design, wiring is easy without the need for insulation. (MIL-C-83503)

Compatible models

Compatible models

FP0-C10RS, C10CRS, C14RS, C14CRS, E8RS, E16RS, E32RS

FP0-C16T/C16P/C16CT/C16CP, C32T/C32P/C32CT/C32CP,

 

E16T/E16P, E32T/E32P, FP0T32CP/T32CT

07/2007

9

 

Loading...
+ 19 hidden pages