Network Camera
PoE type BB-HCM581
BB-HCM580
Indoor Use Only
Access www.viewnetcam.com for registration information.
*This logo mark is issued by the IPv6 Ready Logo Program Committee, an IPv6 promotion group established mainly by the IPv6 Forum.
ViewPlacesThat YouCouldn't
Even SeeBefore
The BB-HCM581/HCM580 camera lets you monitor very large areas with its maximum 360o pan and 158o tilt functions.
A full 42x power zoom also makes it possible to check places in super-fine detail. Thanks to its PoE*1 capability, the camera can be installed in places where it is difficult to provide power, like on factory and warehouse ceilings, or near a building entranceway or elevator hall.
And dual-stack IPv4/IPv6 protocol prepares it
for IPv6 services. This lets you grab every business possibility by breaking distance and time barriers with Zero Distance Management*2.
*1-1 PoE (Power over Ethernet) supplies power through an Ethernet cable. *1-2 Not supported by the BB-HCM580.
*2 For details, see the bottom of this page.
See There
When You Can't Be There™
School |
Warehouses |
Restaurant |
Stores
System Diagram
The PoE function supplies power through an Ethernet cable*. DDNS service and UPnP compatibility make it easy for anybody to set up and use the system over the Internet.
Zero Distance Management is a new business style made possible by Panasonic network cameras.
It allows safe, smooth, economical business management that is totally free from conventional distance and time limitations.
BB-HCM581 Power over |
Broadband |
Modem |
|
Ethernet hub |
router |
|
|
Monitoring Site |
Office |
Outdoors |
*An optional AC adaptor can also be used.