PANJIT UF106, UF108, UF1010, UF101, UF102 Datasheet

UF100 THRU UF1010

ULTRAFAST SWITCHING RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

FEATURES

•Plastic package has Underwriters Laboratory

DO-41

Flammability Classification 94V-O utilizing

Flame Retardant Epoxy Molding Compound

•Void-free Plastic in DO-41 package

•1.0 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Ultra fast switching for high efficiency

MECHANICAL DATA

Case: Molded plastic, DO-41

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Band denotes cathode

Mounting Position: Any

Weight: 0.013 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

	UF100	UF101	UF102		UF104		UF106	UF108	UF1010	UNITS
Peak Reverse Voltage, Pepetitive ; VRM	50	100	200		400	600		800	1000	V
Maximum RMS Voltage	35	70	140		280	420		560	700	V
DC Blocking Voltage; VR	50	100	200		400	600		800	1000	V
Average Forward Current, Io @TA=55 ¢J 3.8”					1.0					A
lead length, 60Hz, resistive or inductive load
Peak Forward Surge Current IFM (surge)					30.0					A
8.3msec. single half sine-wave
superimposed on rated load (JEDEC
method)
Maximum Forward Voltage VF @1.0A, 25 ¢J		1.00			1.10			1.70		V
Maximum Reverse Current, @ Rated TJ=25 ¢J					10.0					£g A
Reverse Voltage TJ=100 ¢J					500					£g A
Typical Junction capacitance (Note 1) CJ					17.0					PF
Typical Junction Resistance (Note 2) R £KJA					60.0					¢J /W
Reverse Recovery Time	50	50	50		50	75		75	75	ns
IF=.5A, IR=1A, Irr=.25A
Operating and Storage Temperature Range			-55 TO +150							¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted