Loading...
Packard Bell
EasyNote SL
Disassembly Manual
|
1 |
Table of Contents |
|
About this Guide..................................................................................................................... |
2 |
For More Information .............................................................................................................. |
2 |
Technician Notes ................................................................................................................... |
2 |
Disassembly .......................................................................................................................... |
2 |
Reassembly........................................................................................................................... |
2 |
Required Tools....................................................................................................................... |
2 |
Hazardous Voltage ................................................................................................................. |
3 |
Avoid Electrostatic Discharge .................................................................................................. |
3 |
Power Supply Unit.................................................................................................................. |
3 |
Battery .................................................................................................................................. |
4 |
Hard Disk Drive 1 ................................................................................................................... |
4 |
Hard Disk Drive 2 ................................................................................................................... |
6 |
Memory ................................................................................................................................. |
7 |
Wireless LAN Adapter............................................................................................................. |
9 |
Optical Disk Drive................................................................................................................. |
10 |
TV Tuner (Optional) .............................................................................................................. |
11 |
Intel Turbo Memory (Optional) ............................................................................................... |
12 |
CMOS Battery...................................................................................................................... |
13 |
Keyboard............................................................................................................................. |
13 |
Top Cover ........................................................................................................................... |
14 |
Touchpad ............................................................................................................................ |
16 |
LCD Assembly ..................................................................................................................... |
16 |
Bluetooth............................................................................................................................. |
17 |
Speakers ............................................................................................................................. |
18 |
USB Board .......................................................................................................................... |
19 |
SATA Adapter ...................................................................................................................... |
19 |
Power Connector ................................................................................................................. |
20 |
CPU Fan and Heat Sink........................................................................................................ |
20 |
Main Board .......................................................................................................................... |
21 |
CPU.................................................................................................................................... |
22 |
Video Board......................................................................................................................... |
23 |
LCD Bezel ........................................................................................................................... |
23 |
Inverter Board...................................................................................................................... |
23 |
Webcam.............................................................................................................................. |
24 |
LCD Panel........................................................................................................................... |
24 |
LCD Cable........................................................................................................................... |
25 |
Wireless LAN Antenna.......................................................................................................... |
25 |
Notice ................................................................................................................................. |
26 |
Packard Bell EasyNote SL Disassembly Manual
2
About this Guide
This guide contains systematic disassembly instructions for the Packard Bell EasyNote SL. The instructions are illustrated where necessary with images of the part that is being disassembled.
Packard Bell B.V. reserves the right to make changes to the EasyNote SL without notice.
For More Information
For more information about the Packard Bell EasyNote SL, visit Packard Bell‘s support web site at
. The support web site also has links to additional Packard Bell documentation and detailed product specifications.
Technician Notes
Only technicians authorized by Packard Bell B.V. should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard. Any indication of component replacement or printed wiring board modifications may void any warranty or exchange allowances.
Disassembly
When disassembling the system unit, follow these general rules:
Turn OFF the power to the system and all peripherals using the power button.
Unplug the AC adapter and all power and signal cables from the system.
Remove any SD/MMC card, ExpressCard or dummy card from the computer.
Do not disassemble the system into parts that are smaller than those specified in the instructions.
Label all removed connectors; note where the connector goes and in what position it was installed.
The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.
Reassembly
Reassembly is the reverse of the disassembly process. Use care to ensure that all cables and screws are returned to their proper positions. Check that no tools or any loose parts have been left inside the casing. Check that everything is properly installed and tightened.
Required Tools
To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic discharge.
Small Phillips screwdriver.
Small flat screwdriver.
Packard Bell EasyNote SL Disassembly Manual
3
Hazardous Voltage
There is hazardous voltage present inside the notebook when it is connected to an AC supply, even when the notebook’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)installation of optional hardware devices.
Avoid Electrostatic Discharge
Electrostatic electricity can easily damage circuit cards and integrated circuits (ICs). To reduce risk of damage, store them in protective packaging whenever they are not installed in the system.
Add-in cards can be extremely sensitive to ESD and always require careful handling. After removing the card from the notebook, place the card flat on a grounded, static-free surface, component-side up. Use a conductive foam pad if available, but not the card wrapper. Do not slide the card over any surface.
Before you install or remove memory modules, video memory, disk drives, circuit cards or other devices, protect them from static electricity. To do so, make sure the notebook’s power switch is OFF. Then, unplug the notebook’s AC power cord. Before picking up the device you (un)install, you should wear an anti-static wrist wrap (available at electronic supply stores). Be sure to connect the wrist wrap to an unpainted metal portion of the notebook casing. As an alternative, you can dissipate electrostatic build-up by touching an unpainted metal portion of the notebook casing with one hand. Then touch the device you are (un)installing with the other hand, and maintain continuous contact with it until it is (un)installed in the notebook.
Power Supply Unit
Under no circumstances should you attempt to disassemble the power supply. The power supply contains no user-serviceable parts. Inside the power supply are hazardous voltages that can cause serious personal injury. Always return a defective power supply to the dealer.
WARNING
Ensure that the notebook is disconnected from its power source and from all telecommunications links, networks, or modem lines whenever the casing cover is removed. Do not operate the notebook with the cover removed.
AVERTISSEMENT
Assurez-vous que le système est débranché de son alimentation ainsi que de toutes les liaisons de télécommunication, des réseaux, et des lignes de modem avant d’enlever le capot. Ne pas utiliser le système quand le capot est enlevé.
WARNUNG
Das System darf weder an eine Stromquelle angeschlossen sein noch eine Verbindung mit einer Telekommunikationseinrichtung, einem Netzwerk oder einer Modem-Leitung haben, wenn die Gehäuseabdeckung entfernt wird. Nehmen Sie das System nicht ohne die Abdeckung in Betrieb.
ADVERTENCIA
Asegúrese de que cada vez que se quite la cubierta del portátil, el sistema haya sido desconectado de la red de alimentación y de todos lo enlaces de telecomunicaciones, de red y de líneas de módem. No ponga en funcionamiento el sistema mientras la cubierta esté quitada.
WAARSCHUWING
Zorg er voor dat alle verbindingen van en naar de notebook (stroom, modem, netwerk, etc) verbroken worden voordat de behuizing geopend wordt. Zet de notebook nooit aan als de behuizing geopend is.
AVVERTENZA
Prima di rimuovere il coperchio del telaio, assicurarsi che il sistema sia scollegato dall’alimentazione, da tutti i collegamenti di comunicazione, reti o linee di modem. Non avviare il sistema senza aver prima messo a posto il coperchio.
Packard Bell EasyNote SL Disassembly Manual
4
Battery
Perform the following steps to remove the battery:
1.Make sure the power is off.
2.Turn the notebook upside down.
Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to the exterior of the notebook.
3. Slide the battery lock/unlock latch to the unlock position.
Fig. 1 Removing the battery.
4.Slide and hold the battery release latch to the release position and, at the same time, lift the battery upwards. There are three tabs holding the battery in place at the back (see Fig. 1).
5.Take the battery out of the compartment (see Fig. 1).
Hard Disk Drive 1
To remove the left hard disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:
1. Remove the screw securing the left hard disk drive compartment cover.
Fig. 2 Removing hard disk drive compartment cover.
2.Lift the cover upwards from the left. There are two tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 2).
Packard Bell EasyNote SL Disassembly Manual
5
3. Remove the two screws securing the hard disk drive in the compartment.
Fig. 3 Release hard disk drive.
4. Pull the plastic tab on the hard disk drive towards the left to disconnect the drive.
Fig. 4 Disconnecting and removing hard disk drive.
5. Take the drive out of its compartment as shown in Fig. 4.
Packard Bell EasyNote SL Disassembly Manual
6
6. Remove the two screws on the metal bracket to separate it from the hard disk drive.
Fig. 5 Location of hard disk drive bracket screws.
Hard Disk Drive 2
To remove the right hard disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:
1. Remove the screw securing the right hard disk drive compartment cover.
Fig. 6 Removing hard disk drive compartment cover.
2.Lift the cover upwards from the right. There are two tabs holding the cover in place on the left. Raise the cover until you can remove it from the casing (see Fig. 6).
Packard Bell EasyNote SL Disassembly Manual
7
3. Remove the two screws securing the hard disk drive in the compartment.
Fig. 7 Disconnecting and removing hard disk drive.
4. Pull the plastic tab on the hard disk drive towards the right to disconnect the drive.
Fig. 8 Disconnecting and removing hard disk drive.
5.Take the drive out of its compartment as shown in Fig. 8.
6.Remove the two screws on the metal bracket to separate it from the hard disk drive (see Fig. 5).
Memory
To remove the memory installed, first remove the battery (see Battery on page 4) and then perform the following steps:
Packard Bell EasyNote SL Disassembly Manual
8
1. Remove the two screws securing the memory compartment.
Fig. 9 Removing memory compartment cover.
2.Lift the cover upwards from the left. There are three tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 9).
3.Release the metal clip on each side securing the memory module; the module will eject upwards.
Fig. 10 Removing memory module.
Packard Bell EasyNote SL Disassembly Manual
Loading...