Owners Manual: (revis ed)
XT R eme 400 / 800 2 channel amplifier
1. Power LED - when lit indicates the amplifier is on
2. Output Configuration Switches - determine the output config. of the amplifier
3.Independent Gain Controls - continuously adjust from
200mV to 5Vrms for full power output
4.RCA Inputs - accepts RCA input from a source unit
5.Aux RCA Outputs- extra connection for more amplifiers
6.Aux RCA Output Control - determines output of RCA outputs
7.Low Pass Freq. Control - adjusts freq. of LP x-over
8.Low Pass X-over Activation Switch- turns x-over on / off
9.High Pass Q adjust - adjusts the "Q" of the HP x-over
10.High Pass x10 switch - selects the freq. range of the HP x-over
11.High Pass Freq. Control - freq. adjust of HP x-over
12.High Pass X-over Activation Switch - turns x-over on/off
2 |
6 |
9 |
10 |
1
3 |
4 |
5 |
7 |
8 |
11 |
12 |
Amp Model |
4ohm P ower |
L owes t R ecommend |
F us e S ize |
S /N |
T HD |
F requency |
Dimens ions L x W x H |
Impedance in S tereo |
R es pons e |
||||||
|
|
|
|
|
|
|
|
XTR-400 |
100 watts |
2 ohms |
(2) 20 amp |
100dB |
<0.1% |
6hz to 50K hz |
12" x 10.25" x 2.25" |
+/- 0.5dB |
|||||||
|
|
|
|
|
|
|
|
XTR-800 |
200 watts |
2 ohms |
(2) 30 amp |
100dB |
<0.1% |
6hz to 50K hz |
18" x 10.25" x 2.25" |
+/- 0.5dB |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|