Size:
7.17 Mb
Download

Table of Contents

Table of Contents..........................................................................................

1

Usage Notice................................................................................................

2

Safety Information.................................................................................................

2

Precautions...........................................................................................................

3

Eye Safety Warnings.............................................................................................

5

Introduction...................................................................................................

6

Product Features...................................................................................................

6

Package Overview................................................................................................

7

Product Overview..................................................................................................

8

Main Unit........................................................................................................................

8

Control Panel..................................................................................................................

9

Connection Ports..........................................................................................................

10

Wireless Remote Control..............................................................................................

11

Installation...................................................................................................

12

Connecting the Projector.....................................................................................

12

Powering On/Off the Projector............................................................................

13

Powering On the Projector...........................................................................................

13

Powering Off the projector............................................................................................

14

Warning Indicator..........................................................................................................

14

Adjusting the Projected Image............................................................................

15

Adjusting the Projector Image Height...........................................................................

15

Adjusting the Projector Zoom / Focus..........................................................................

16

Adjusting Projected Image Size....................................................................................

16

User Controls..............................................................................................

17

Control Panel & Remote Control.........................................................................

17

On-ScreenDisplay Menus..................................................................................

20

How to operate ............................................................................................................

20

Menu Tree.....................................................................................................................

21

Language......................................................................................................................

22

Management I..............................................................................................................

23

Management II.............................................................................................................

25

Image-I ........................................................................................................................

26

Image-II(Computer Mode / Video Mode).....................................................................

28

Colour Setting ..............................................................................................................

30

Appendices.................................................................................................

31

Troubleshooting...................................................................................................

31

Replacing the lamp.............................................................................................

35

Compatibility Modes............................................................................................

36

Ceiling Mount Installation....................................................................................

37

Optoma Global Offices........................................................................................

38

English

Usage Notice

Safety Information

The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-CausingEquipment Regulations.

Important Safety Instruction

1.Read these instructions –beforeusing this projector.

2.Keep these instructions –forfuture reference.

3.Follow all instructions.

4.Install in accordance with the manufacturer’s instructions

A. Do not block any ventilation openings

To ensure reliable operation of the projector and to protect it from overheating, put the projector in a position and location that will not interfere with its proper ventilation. For example, do not place the projector on a bed, sofa, carpet, or similar surface that may block the ventilation openings. Do not put it in an enclosure, such as a bookcase or a cabinet that may keep air from flowing through its ventilation openings.

B.Do not use this projector near water or moisture. To reduce the risk of fire or electric shock, do not expose the projector to rain or mois- ture.

C.Do not install near any heat sources, such as radiators, heaters, stoves or other apparatus (including amplifiers) that produce heat.

5.Clean only with a dry cloth.

6.Only use attachments/accessories specified by the manufacturer.

7.Refer all servicing to qualified service personnel. Servicing is required when the projector has been damaged in any way:

Such as power supply cord or plug is damaged.

Liquid has been spilled or objects have fallen into the apparatus.The projector has been exposed to rain or moisture, does not oper-

ate normally, or has been dropped.

Do not attempt to service this projector yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma to be referred to an authorized service center near you.

8.Do not let objects or liquids enter the projector –asthey may touchdangerous voltage points or short-out parts that could result in a fire or electric shock.

9.See projector enclosure for safety related markings.

10. The projector should not be adjusted or repaired by anyone except

properly qualified service personnel.

English

Usage Notice

Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit.

Warning

-

Do not look into the projector’s lens when the

 

 

lamp is on. The bright light may hurt your eyes.

Warning

-

To reduce the risk of fire or electric shock, do not

 

 

expose this product to rain or moisture.

Warning

-

Please do not open or disassemble the product

 

 

as this may cause electric shock.

Warning

-

When changing the lamp, please allow unit to

 

 

cool down, and follow all changing instructions.

Warning

-

This product will detect the life of the lamp

 

 

itself. Please be sure to change the lamp when it

 

 

shows warning messages (refer to page 34).

Warning

-

Reset the “Reset Lamp Hours” function from the

 

 

On Screen Display “Management II” menu after

 

 

replacing the lamp module (refer to page 25).

Warning

-

When switching the projector off, please ensure

 

 

the projector completes its cooling cycle before

 

 

disconnecting power.

Warning

-

Turn on the projector first and then the signal

 

 

sources.

Warning

-

Do not use lens cap when projector is in opera-

 

 

tion.

Warning

-

When the lamp reaches the end of its life, it will

 

 

burn out and may make a loud popping sound.

 

 

If this happens, the projector will not turn back

 

 

on until the lamp module has been replaced. To

 

 

replace the lamp, follow the procedures listed

 

 

under “Replacing the Lamp”. (see page 35)

English

Usage Notice

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display housing.

Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Don’t:

Block the slots and openings on the unit provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

-In extremely hot, cold or humid environments.

-In areas susceptible to excessive dust and dirt.

-Near any appliance that generates a strong magnetic field.

-In direct sunlight.

English

Usage Notice

Eye Safety Warnings

Avoid staring directly into the projector beam at all times.

Minimize standing facing into the beam. Keep your back to the beam as much as possible.

A stick or laser pointer is recommended to avoid the need for the user to enter the beam.

Ensure that projectors are located out of the line of sight from the screen to the audience; this ensures that, when presenters look at the audience, they do not also have to stare at the projector lamp. The best way to achieve this is byceiling-mount-ing rather than floor or table-mounting the projector.

When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.

In order to minimize the lamp power needed, use room blinds to reduce ambient light levels.

English

Introduction

Product Features

This product is an SVGA single chip 0.55” DLPTM projector. Outstanding features include:

True SVGA, 800 x 600 addressable pixels

Single chip Dark Chip2TM DLPTM technology

NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAMand

HDTV compatible (480i/p, 576i/p, 720p, 1080i)

Multi-Autofunctions: Auto detection, Auto image and Auto saving the adjustments

Full function remote control

User friendly multilingual on screen display menu

Advanced digital keystone correction and high quality full screen image re-scaling

User friendly control panel

SXGA, XGA compression and VGA re-sizing

Mac compatible

English

Introduction

Package Overview

This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.

Due to the difference in applications for each country, some regions may have different accessories.

Projector with lens cap

Power Cord 1.8m

VGA Cable 1.8m

Remote Controller

2 x AAA Batteries

Carrying Case

 

 

(for US/ASIA only)

SCART RGB/S-Video

Adaptor

(available in European

version only)

Documents :

User’s Guide

Quick Start Card

Warranty Card

English

Introduction

Product Overview

Main Unit

1

8

7

6

5

2

10 9

2

3

4

 

 

 

 

1.

Control Panel

6.

Elevator Foot

2.

Zoom Lever

7.

Elevator Button

3.

Focus Ring

8.

IR Receivers

4.

Power Socket

9.

Connection Ports

5.

Zoom Lens

10.

Tilt Adjusting Feet

 

 

 

 

 

 

 

 

English

Introduction

Control Panel

1

2

5

3

4

6

10

9

4

8

7

1.Power Indicator LED

2.Temp Indicator LED

3.Lamp Indicator LED

4.Keystone Correction

5.Menu (On/Off)

6.Power/Standby

7.Four Directional Select Keys

8.Re-Sync

9.Source

10.Enter

English

Introduction

Connection Ports

1

3

4

5

1.PC Analog signal/SCART RGB/HDTV/Component Video Input Connector

2.S-VideoInput Connector

3.Composite Video Input Connector

4.RS232 Connector

5.KensingtonTM Lock Port

English 10

Introduction

Wireless Remote Control

1.IR LED

2.Power

3.Re-Sync

4.Display Mode

5.Keystone Correction

6.Number Buttons

7.Clear

8.Sleep Timer

9.Video

10.S-VideoSource

11.Source Lock

12.VGA Source

13.Color Setting

14.Menu

15.Enter

16.Four Directional Select Keys

17.Brightness

18.Zoom

19.Display Format

20.Hide

21.Freeze

1

21

20

3

 

 

5

16

6

14

8

12

11

11 English

Installation

Connecting the Projector

Due to the difference in applications for each country, some regions may have different accessories.

DVD Player, Settop Box,

HDTV receiver

1

2 6

5

3

4

Video Output

S-VideoOutput

1

...............................................................................................................Power Cord

2

................................................................................................................VGA Cable

3....................................................

Composite Video Cable (Optional Accessory)

4.....................................................................

S - Video Cable (Optional Accessory)

5.....................................

D - 15 to RCA Adapter for YPbPr (Optional Accessory)

6........................................................................

RS232 Cable (Optional Accessory)

To ensure the projector works well with your computer, please set the display mode of your graphic card less than or equal to 1280 X 1024 resolution. Make sure the timing of the display mode is compatible with the projector. Refer to the “Compatibility Modes” section on page 36.

English 12

Installation

Powering On/Off the Projector

Powering On the Projector

1.Remove the lens cap.

2.Ensure that the power cord and signal cable are securely connected. The Power LED will Flash Green.

3.Turn on the lamp by pressing “Power/Standby” button on the control panel.And the Power LED will turnGreen.

The first time you use the projector, you can select your preferred language from quick menu after the startup screen display.

4.Turn on your source (computer, notebook, video player,etc.).

The projector will detect your source automatically.

If you connect multiple sources at the same time, use the “Source” button on the control panel or remote control to switch.

Turn on the projectorfirst and then the signal sources.

2 Power/Standby

Lens Cap

1

13 English

Installation

Powering off the projector

1. Press the “Power/Standby” button to turn off the projector lamp, you will see a message “ ”

displayed on the projector’s screen. Press the “Power/

Standby” button again to confirm, otherwise the message will disappear after 5 seconds.

Please note that if the key is pressed instead, the projector will enter the “Picture Mute” mode and no image will be displayed. To exit the “Picture Mute” mode, press the “Power/Standby” button again.

2.The cooling fans continue to operate for about 30 seconds for cooling cycle and the Power LED will turn green. When the Power LED begins flashing, the projector has entered standby mode.

If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press “Power/Standby” button to restart the projector.

3.Disconnect the power cord from the electrical outlet and the projector.

4.Do not turn on the projector immediately following a power off procedure.

Warning Indicator

When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. See page 38.

When the “TEMP” indicator lights solid red, it indicates the projector has been overheated. The projector will automatically shut itself down.

Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center. See page 38.

When the “LAMP” indicator flashes red, it indicates the fan failed. Please contact your local dealer or our service center.

See page 38.

English 14

Installation

Adjusting the Projected Image

Adjusting the Projector Image Height

The projector is equipped with an elevator foot for adjusting the image height.

To raise the image:

1.Press the elevator button .

2.Raise the image to the desired height angle , then release the button to lock the elevator foot into position.

3.Use tofine-tunethe display angle.

To lower the image:

1.Press the elevator button.

2.Lower the image, then release the button to lock the elevator foot into position.

3.Use tofine-tunethe display angle.

1

Elevator Button

3

2

3

 

Elevator Foot

Tilt Adjusting

 

 

Feet

15 English

Installation

Adjusting the Projector Zoom / Focus

You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.9 to 39.4 feet (1.5 to 12.0 meters) with mechanical travel.

Zoom Lever

Focus Ring

Adjusting Projection Image Size

Diagonal

Height

 

Width

 

 

38.1"

(96.8cm)

 

34.7"

(88.1cm)

 

 

 

 

304.9"

Diagonal

 

203.3"

(774.5cm)

 

 

 

 

177.9"

(516.3cm)

 

 

 

 

 

 

127.1"

(451.8cm)

 

 

 

 

 

277.3"

 

(322.7cm)

 

 

76.2"

 

184.9"

(704.4cm)

 

 

(193.6cm)

 

161.8"

(469.6cm)

 

 

115.6"

(410.9cm)

 

 

69.3"

(293.5cm)

 

 

 

(176.1cm)

 

 

 

 

 

 

 

 

 

 

4.9'(1.5m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9.8'(3.0m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16.4'(5.0m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23.0'(7.0m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26.3'(8.0m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

39.4'(12.0m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screen

Max.

38.1"(96.8cm)

76.2"(193.6cm)

127.1"(322.7cm)

177.9"(451.8cm)

203.3"(516.3cm)

304.9"(774.5cm)

(Diagonal)

Min.

34.7"(88.1cm)

69.3"(176.1cm)

115.6"(293.5cm)

161.8"(410.9cm)

184.9"(469.6cm)

277.3"(704.4cm)

 

 

 

 

 

 

 

 

 

Screen

Max.(WxH)

30.5" x 22.9"

61.0" x 45.7"

101.7" x 76.3"

142.3" x 106.7"

 

162.6" x 122.0"

243.9" x 182.9"

(77.4 x 58.1cm)

(154.9 x 116.2cm)

(258.2 x 193.6cm)

(361.4 x 271.1cm)

(413.0 x 309.8cm)

(619.6 x 464.7cm)

Size

Min.(WxH)

27.8" x 20.8"

55.4" x 41.6"

92.5" x 69.4"

129.4" x 97.1"

 

147.9" x 110.9"

221.8" x 166.4"

 

(70.5 x 52.9cm)

(140.9 x 105.7cm)

(234.8 x 176.1cm)

(328.7 x 246.5cm)

(375.7 x 281.8cm)

(563.5 x 422.6cm)

 

 

Distance

4.9'(1.5m)

9.8'(3.0m)

16.4'(5.0m)

 

23.0'(7.0m)

 

26.3'(8.0m)

39.4'(12.0m)

This graph is for user’s reference only.

English 16

User Controls

Control Panel & Remote Control

There are two ways for you to control the functions: Remote Control and Control Panel.

Control Panel

Remote Control

Using the Control Panel

Power/Standby

Refer14. to the “Power On/Off the Projector” section on pages 13-

Source

Press “Source” to choose RGB, Component-p,Component-i,S- Video, Composite Video and HDTV sources.

Menu

Press “Menu” to launch the on screen display (OSD) menu. To exit OSD, press “Menu” again.

Keystone /

Adjusts image distortion caused by tilting the projector (±15 degrees).

Four Directional Select Keys

selection.Use

to select items or make adjustments to your

Enter

Confirm your selection of items.

Re-Sync

Automatically synchronizes the projector to the input source.

17 English

User Controls

Using the Remote Control

Power

Refer14. to the “Power On/Off the Projector” section on pages 13-

Re-Sync

Automatically synchronizes the projector to the input source.

Hide

Press “Hide” to hide image, press again to restore display of the image.

Display Format

Display the “Display Format” section of the on screen display menu to select the desired aspect ratio.

Freeze

Press “Freeze” to pause the screen image.

Display Mode

Select the display mode from PC, Movie, Game, sRGB and User.

Keystone /

Adjusts image distortion caused by tilting the projector (±15 degrees).

Brightness

Adjust the brightness of the image.

Zoom

Press “D-Zoom”button to zoom in of an image.

Four Directional Select Keys

selection.Use

to select items or make adjustments to your

Enter

Confirm your selection of items.

Menu

Press “Menu” to launch the on screen display menu. To exit OSD, press “Menu” again.

English 18

User Controls

Clear

Clear your selection.

Color Setting

Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for advanced adjustment of the individual colors.

Source Lock

Selectport. auto detection all connector ports or lock current connector

Sleep Timer

Sets the countdown timer interval.

VGA

Press “VGA” to choose VGA connector.

S-Video

Press “S-Video”to chooseS-Videosource.

Video

Choose composite video source.

19 English

User Controls

On Screen Display Menus

The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of

settings. The projector will automatically detect the source.

How to operate

1.To open the OSD menu, press “Menu ” on the Remote Control or Control Panel.

2.When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, pressor “Enter” key to enter sub menu.

3.Use keys to select the desired item and adjust the settings bykey.

4.Select the next item to be adjusted in the sub menu and adjust as described above.

5.Press “Menu ” to confirm, and the screen will return to the mainmenu.

6.To exit, press “Menu ”again. The OSD menu will close and the projector will automatically save the new settings.

Main Menu

Sub

 

Menu

 

 

 

Setting

English 20