Page 1
The system also removes foul tastes,
odors, scale-causing minerals, chlo-
rine, chlorides, sulfates and many
other contaminants, yet leaves a trace
of minerals to prevent the problems
associated with very pure water with
little or no total dissolved solids. (e.g.
RO, distilled or deionized water.)
Compact, Wall-Mount design with
remote tank provides exibility
and requires very little oorspace.
Optional tank capacities include 5,
water storage.
Pump driven for reliable perfor-
mance under any conditions.
The
OptiPure W-Series utilizes a pump
to feed the selective rejection mem-
branes to provide consistent produc-
tion of up to 200 gallons of optimized
purity water/day. The small, ef cient
diaphragm pump boosts the line pres-
sure to 80 psi allowing a tank full
shut-off of 60 psi. The wall-mount
system includes the pre lters, pump,
membrane and post- lter allowing in
an easy to install package that maxi-
mizes installation exibility. Tanks
are sealed to the atmosphere and are
equipped with a pressurized bladder
that can provide a consistent outlet
water pressure between 40 and 60 psi.
The OptiPure W-Series is manufactured by:
Page 2
OPM100
OPM200
Rejection of scale forming minerals is typically >95% on standard SRM
3/8” OD Polyethylene Tubing. (10’ of tubing included)
3/8” OD Polyethylene tubing (10’ of tubing included)
1 @ 252-20110 Carbon Filter for Taste & Odor Removal.
Loading...