Page 1
The FXI-22P+
is a three housing water treatment system
®
Snapshot
Foodservice Filtration Systems
with drop-in 20” cartridges that reduces sediment down
to 0.5 micron and reduces chlorine, taste & odor at a
ow rate of 6.0 gpm for 60,000 gallons. The system
®
includes IsoNet
,
OptiPure’s patented scale inhibiting
technology, which delivers consistent protection against
the precipitation and accumulation of scale and provides a
protective barrier to help guard against corrosion.
System Bene ts
Model: FXI-22P+
Part #: 160-50125
ITEM #: __________________ QTY: ________
JOB NAME/NUMBER_____________________
l
- OptiPure’s patented scale inhibiting technology
helps protect equipment against scale and corrosion for
the rated capacity of the system.
l
Reduces maintenance frequency and cost, and extends
equipment life.
l
Gradient-density depth ltration reduces dirt, rust, and
other debris as small as 1/2 micron to assure clean, clear
water and protect solenoids, valves and other ttings
against wear and plugging.
l
5-micron Polytrix pre lter provides added protection
against excessive sediment found in some water supplies.
l
High capacity activated carbon ltration makes water taste
great and protects equipment against corrosive chlorine.
l
Improves equipment operating ef ciency.
l
White powder coated heavy gauge steel mounting bracket
and full- ow inlet shut-off valve makes installation simple.
l
Built-in pressure gauge allows visual monitoring of
operating pressure.
l
Inlet shut-off and depressurization valves make changing
the lters quick and simple.
l
Generates less waste, only the drop-in cartridges are
replaced. No discarding of metal or plastic quick-change
lters.
l
Replacement cartridge cost per gallon is much less than
proprietary quick-change lters.
l
NSF Certi ed under Standard 42.
Application
ICE -
High production cubers up to 2,400 lbs. and akers
up to 4,000 lbs. Includes pre lter for water supplies with high
turbidity levels.
Installation Tips
l
Feed-water connection to system should be COLD only.
l
Do not exceed system speci cations for temperature
and pressure.
l
Allow 3” clearance below system for lter housing
removal and cartridge replacement.
l
Detailed installation, operation & maintenance manual
is included with each system.
l
No activation procedure or ushing is required for
system to perform as speci ed.
Page 2
Model: FXI-22P+
Foodservice Filtration S y s t e m s
Part #: 160-50125
Specications
System
Dimensions
Height x Width X Depth, inches)
Connection - Inlet & Outlet 1/2” NPT female
Operating Pressure Range 10-125 psi
Inlet Water Temperature Range 35o -100
Shipping Weight 32 lbs.
Performance
Chlorine, Taste and Odor
Reduction Capacity
Service Flow Rate 6.0 gpm
Sediment Reduction .5 micron
Scale & Corrosion Inhibitor IsoNet (280 grams)
25 3/4” x 17 1/2”
x 9 3/4”
(0.7 -8.6 bar)
o
F
o
(2o -38
C)
60,000 gals
(226,800 liters)
(22.7 lpm)
(nominal)
Dealer/Distributor Info:
Model FXI-22P+ is tested and certied
by NSF International against NSF/ANSI
Standard 42 for the reduction of:
Standard 42: Aesthetic Effects,
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class 1
Optional Flush Valve Kit - Part #: 160-52910
Replacement Cartridge(s)
Model Part Number Qty
S5-20 252-10120 1
CTOS-20 252-20220 2
It is recommended that lters be changed every six
months, when capacity is reached or when efuent
pressure or ow becomes inadequate.
This product is for commercial use only and must be
installed
and maintained according to manufacturers
guidelines.
Do not use on water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.
Warranty
Systems have a 3 year warranty against defects in
material and workmanship. For complete warranty
information contact OptiPure customer service or go to
www.optipurewater.com.
OptiPure, Mfg. by Procam Controls, Inc.
2605 Technology Dr., Bldg 300
Plano, TX 75074
p: 972.881.9797; f: 972.422.6262
www.optipurewater.com
FXI-22P+spec109
Loading...