Optimus STAV-3560, 31-3036, STAV-3570, 31-3035 User Manual

Cat. No. 31-3035/3036

Digital Synthesize

Audio/Video

Surround Receive

STAV-3560/3570

	STAV-3560 DIGITAL SYNTHESIZED AUDIO/VIDEO STEREO RECEIVER									VOLUME
					PHONO	TUNER	LD/DVD	CD
POWER					SUPER		TAPE 1	TAPE 2
	SFC	DOLBY					VCR	MONITOR
					BASS
	MODE	PRO LOGIC
								MIN			MAX
DOLBY SURROUND				MEMORY		CLASS	STATION
P R O	L O G I C								TREBLE	BALANCE
								BASS
PHONES	SPEAKERS		4-CHANNEL
			EQUAL POWER
	A	B	OUTPUT	FM MONO		FM/AM	TUNING
				OSR						L	R

STAV-3570 DIGITAL SYNTHESIZED AUDIO/VIDEO STEREO RECEIVER			VOLUME
PHONO	TUNER	LD/DVD	CD
STAND BY

POWER						VCR	TAPE 2
		DOLBY		SUPER		TAPE 1	MONITOR
	SFC MODE			BASS
		PRO LOGIC
							MIN			MAX
DOLBY SURROUND				MEMORY	CLASS	STATION
P R O	L O G I C							TREBLE	BALANCE
							BASS
PHONES	SPEAKERS		4-CHANNEL
			EQUAL POWER
	A	B	OUTPUT	FM MONO	FM/AM	TUNING
				OSR					L	R

Owner’s Manual				Please read before using this equipment.

Introducing the Optimus STAV-3560/3570

Your Optimus STAV-3560/3570 Digital Synthesized A/V Surround Receiver is the perfect control center for your audio/video system. It combines 60 watts-per- channel (STAV-3560) or 100 watts-per-channel (STAV-3570) of clean power with modern stylingl And, it provides connections for one tape deck, one audio/ video source, one more tape deck or audio/video playback source, a turntable, a CD player, and a video monitor.

Your receiver also has four special sound options. Dolby Pro-Logic Surround Sound delivers movie theater sound for audio/video programs (especially those encoded with Dolby Surround Sound signals). Dolby 3CH Logic provides a wider sound field than ordinary playback. Studio Effect simulates the ambiance of a recording studio, adding extra richness to your music. Simulated Surround gives you a surround-sound effect even when you listen to monaural sources.

Additional features include:

Digital-Synthesized Tuner Precisely tunes to AM and FM stations.

Automatic Tuning Searches for the next available AM/FM station.

30 Memory Locations Let you store and recall the frequencies for up to 30 AM/FM stations.

Super Bass Creates a richer, fuller sound by enhancing the bass portion of the program.

Tape Monitoring Lets you listen to the actual recording as you record, if your tape deck has a tape-monitoring feature.

Built-In Protection Circuits Turn off the receiver to help prevent damage if a power surge or short circuit occurs.

Remote Control Lets you use a single remote control for the receiver and other compatible components connected to the receiver.

We recommend you record the receiver’s serial number here . The serial number is on the receiver’s back panel.

Serial Number:_____________________________________________

Note to the Cable TV System Installer:

This reminder is provided to call the CATV system installer’s attention to article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Manufactured under license from Dolby Laboratories Licensing Corporation.

Additionally licensed under one or more of the following Patents: U.S. Number 3,959,590; Canadian Numbers 1,004,603 and 1,037,877.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. ã 1996 Tandy Corporation.

All Rights Reserved.

Optimus is a registered trademark used by Tandy Corporation. RadioShack is a trademark used by Tandy Corporation.

2

IMPORTANT SAFETY INSTRUCTIONS

This receiver is made and tested to meet exacting safety standards. It meets both UL and FCC requirements

To prevent fire or shock hazard, do not expose this system to rain or moisture.

	CAUTION	!
	RISK OF ELECTRIC SHOCK.
	DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the system’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the system’s case.

This symbol is intended to inform you that im-

!portant operating and maintenance instructions are included in the literature accompanying this system.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

Power Lines—Locate an outdoor antenna away from power lines.

Nonuse Periods—Unplug the receiver’s power cord when you will not use it for extended periods.

Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the receiver, ground the antenna or cable system so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 80, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. See the example below.

		Antenna
		Lead-In
		Wire
	Ground Clamp
		Antenna
		Discharge Unit
	Electric	(NEC Section 810-20)
	Service	Grounding Conductors
	Equipment	(NEC Section 810-21)
		Grounding Clamps
		Power Service Grounding
	NEC -- National Electrical Code	Electrode System
		(NEC Article 250, Part H)

Careful attention is devoted to quality standards in the manufacture of your receiver, and safety is a major factor in its design. However, safety is also your responsibility.

This section lists important information that will help you properly use and enjoy your receiver and accessories. Read all the included safety and operating instructions before using your receiver. Follow them closely, and retain them for future reference.

Heed Warnings — Follow all warnings on the product and in the operating instructions.

Cleaning — Unplug this product from the wall outlet before cleaning. Use only a damp cloth fo r cleaning. Do not use liquid or aerosol cleaners.

Attachments — Do not use attachments/accessories not recommended by the product manufac turer, as they might create a hazard.

Water and Moisture — Do not use this product near water (for example, near a bathtub, washbowl kitchen sink, or laundry tub; in a wet basement; or near a swimming pool).

Accessories — Do not place this product on an unstable cart, stand, tripod, bracket, or table. Th e product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions for mounting, and use a recommended mounting accessory.

Carts — Move the product on a cart carefully. Quick stops, excessive force, an d uneven surfaces may cause the product/cart to overturn.

Ventilation — Slots and openings in the cabinet provide ventilation, ensure reli - able operation, and protect from overheating. Do not block or cover these openings, and do not place the product on a bed, sofa, rug, or other similar surface. Do not place the product in a built-in bookcase or rack unless it provides proper ventilation as specified by the manufacturer.

Power Sources — Operate this product using only the power source indicated on its marking label If you are not sure of your home's power type, consult your product dealer or local power company

Polarization — This product is equipped with a polarized AC line plug (a plug having one blad e wider than the other). This plug will fit in the power outlet only one way. This is a safety feature. I you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If you need an extension, use a polarized cord.

Power-Cord Protection — Route power-supply cords so they are not likely to be walked on o r pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

Lightning — For added protection for this product during a lightning storm, or when it is left unat tended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges

Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

Objects and Liquids — Never push objects of any kind into this product through openings, as the y may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product.

Servicing — Do not attempt to service this product yourself, as opening or removing covers ma y expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qual - ified service personnel under the following conditions:

•When the power-supply cord or plug is damaged.

•If liquid has been spilled or objects have fallen into the product.

•If the product has been exposed to rain or water.

•If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment o other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

•If the product has been dropped or damaged in any way.

•When the product exhibits a distinct change in performance.

Replacement Parts — When replacement parts are required, be sure the service technician use s replacement parts specified by the manufacturer or having the same characteristics as the origina part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check — Upon completion of service or repairs to this product, ask the service technicia n to perform safety checks to determine that the product is in proper operating condition.

Wall or Ceiling Mount — The product should be mounted to a wall or ceiling only as recommende d by the manufacturer.

Heat — The product should be situated away from heat sources such as radiators, heat registers stoves, or other products (including amplifiers) that produce heat.

3

Contents

Preparing Your Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Positioning Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting Program Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting the Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Using One Remote Control for More Than One Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the Remote Control’s Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the AC Power Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connecting to AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Tuning the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Using FM Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Muting the Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Cassette Deck/VCR Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using the VCR/TAPE 1 Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using the TAPE 2 MONITOR Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Recording a Program Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Dubbing a Cassette Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Playing and Recording Video Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using Advanced Sound Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Sound Mode Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Returning Controls to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 The FCC Wants You To Know . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Index to Features by Control Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4

Preparing Your Receiver

Caution: Make all the necessary connections before you plug in or turn on the receiver.

Positioning Speakers

a

L R

Halfway Point

Between Speake

b

a=b

Person in Listening Area

•Surround speakers generally sound best if you position them above ear level.

•To avoid interference with the picture on a nearby TV, use magnetically shielded speaker systems. This is particularly important for the center speaker since it is usually located closest to the TV.

Where you place your speakers (not supplied) can make a noticeable difference in your system’s sound. The guidelines in this section will help you choose the best locations. After you use your receiver for a while, you might want to try different locations for your speakers.

Bass response depends largely on speaker location. For strong bass, place the speakers in the corners of the room. If you want even stronger bass, place the speakers directly on the floor. If the bass is too strong, move the speakers slightly away from the corners of the room, or raise them 6 to 18 inches off the floor. You can buy speaker stands at your local RadioShack store.

The distance between the speakers should be about the same as the distance between the normal listening point and the point halfway between the speakers. If you place the speakers too close together, you reduce the stereo separation. If you place them too far apart, you reduce the bass effect and create a hole in the middle of the sound.

Most speakers have a tweeter dispersion angle of about 60 degrees. Ideally, your listening position should be just inside the overlap area of the tweeter dispersion. You can angle the speakers toward you for better stereo effect.

To position your speakers for surround sound, place the A or B speakers at the front of your listening area, and place the surround speakers behind or to the sides of the listening point (see “Using Advanced Sound Options”). Also, place the center speaker above, below, or behind the TV. Sound might not appear to coincide with the picture if you place it beside the TV.

Right Front

Left Front

Center Channel

Listening

Area

Rear Channel	Rear Channel

5

Preparing Your Receiver

	Connecting Speakers			Preparing the Speaker Wires
				Speaker wire consists of two conductors (individual wires) encased in insulation
	Follow these guidelines when you select
				and is usually color-coded or marked with a ridge along one side so you can
	and connect speakers.
				identify each conductor. Use these markings as a guide to help you properly
	•	Only connect speakers that are rated
				connect the speakers to your receiver.
		at between 8 and 16 Ohms.
	• Be sure you properly		connect all	Follow these steps to prepare the speaker wires.
		speakers.							WireStrandsd
	•	Do not connect two pairs of speakers
		to a single set of terminals (A or B) at
		the same time. When you use two
		pairs of speakers, connect one set to
					Conductor
		Speakers A and one set to Speakers B.			Speaker Wire
	•	Realistic, Optimus, and	other high-				Wire		Strands
		quality speakers have	color-coded						Wire Strands
							Conductor
		speaker terminals (red for positive					Conductor
		polarity and black for negative polar-
		ity). Use these color-coded terminals
		as a guide to help you properly con-		1. Cut the speaker wires to the necessary length.
		nect the speakers to the receiver.

•Use 16-gauge (or larger) speaker wire 2. Separate the wires about 4 inches on each end. for all speaker connections, and con-

sider possible speaker locations

3.

Using a wire stripper, carefully strip about 3/4 inch of insulation from the

before you decide how much speaker

end of each conductor.

wire you need.

4.

Twist the end of each conductor to secure any loose wire strands.

Right

Front B Speakers

Left

Right

Front A Speakers

Left

Center Speaker

	R	L
	A	A
	B	B
AUDIO	R	L
IN	FRONT SPEAKERS

R L

PRE OUT

R L

SUB

WOOFER CENTER REAR

SPEAKER SPEAKERS

SubwooAmplifieder

Subwoofer

Amplifiers

Right

Surround Speakers

Left

6

Preparing Your Receiver

Note: Be sure you connect the receiver’s right and left positive (+) and negative (–) terminals to the speaker’s corresponding right and left positive (+) and negative (–) terminals.

Connecting the A and B Speakers

Follow these steps to connect the right speaker to the receiver’s right FRONT SPEAKERS A terminals.

1.Press the receiver’s FRONT SPEAKERS A R (+) red lever and insert the ridged or color-coded conductor’s end into the small hole. Pull back the lever to secure the conductor.

2.Press the receiver’s FRONT SPEAKERS A R (– ) black lever and insert the other conductor’s end into the small hole. Pull back the lever to secure the conductor.

3.Connect the ridged or color-coded conductor’s loose end to the right speaker’s positive (+) terminal.

4.Connect the remaining loose conductor to the right speaker’s negative (–) terminal.

Repeat Steps 1 through 4 to connect the left speaker to the receiver’s FRONT SPEAKERS A L terminals.

Repeat this entire process to connect a second pair of speakers to the FRONT SPEAKERS B terminals.

Connecting Surround-Sound Speakers

You can connect a pair of speakers to the receiver’s REAR SPEAKERS terminals for surround-sound programs. Follow the steps in “Connecting the A and B Speakers.”

Connecting the Center Speaker

The center speaker gives additional ambience to surround sound. Connect the center speaker to the CENTER SPEAKER terminals. Follow the steps in “Connecting the A and B Speakers.”

Connecting a Subwoofer Amplifier (STAV-3570 Only)

Your receiver includes a line-level subwoofer output. Connecting a subwoofer to your system dramatically extends bass response for incredible richness and depth. When you listen to surround-sound programs, a subwoofer enhances your home theater experience by realistically recreating the rumble of an earthquake, the bone-jarring percussion of a cannon, and more.

To use this output, simply connect it to an amplified subwoofer’s line-level input or to an amplifier connected to a subwoofer.

RadioShack stores sell a variety of suitable subwoofers and amplifiers.

7

Preparing Your Receiver

Connecting Program Sources You can connect up to five external program sources to your receiver at one time.

L

R

L

R	L	L
		LINE
	REC	PLAY
		L
		R
	REC	PLAY
	INPUT	OUTPUT

R

			OUT	IN
		VIDEO
	IN	REC PLAY	OUT	IN
	L
	R
	PHONO	TAPE2	VCR/
		MONITOR	TAPE 1
		GND
R	L	L	R	R
		R

R	L	L	R
		LINE
	REC	PLAY
		L
		R
	REC	PLAY
	INPUT	OUTPUT

IN	TO MONITOR TV

VIDEO OUT

IN IN

L

OUT

R

LD/

DVD CD CONTROL

L

R

L

R

L

OUT PUT

L

R

Turntable

Cassette Deck

Cassette Deck

Connecting a Turntable

CD

CD Player

Note: Use shielded audio cables with phono connectors for all audio connections.

Connect a turntable with a magnetic cartridge only. Some older turntables use a ceramic-type cartridge that does not work with this system.

Connect the turntable’s left and right cables to the receiver’s left and right PHONO jacks. Then connect the turntable’s ground wire to the receiver’s GND terminal.

Note: If you place the cassette deck directly above, below, or to the left of the receiver, the receiver could interfere with the cassette deck’s operation. If possible, position the cassette deck to the right of the receiver or locate it away from the receiver.

Connecting Cassette Deck(s)

You can connect cassette decks to the VCR/TAPE 1 and the TAPE 2 MONITOR jacks. Connect the cassette deck’s output jacks to the VCR/TAPE 1 IN (audio) or TAPE 2 MONITOR PLAY jacks, and connect the cassette deck’s input jacks to the

VCR/TAPE 1 OUT (audio) or TAPE 2 MONITOR REC jacks.

You can connect a third cassette deck (for playback only) to the LD/DVD IN (audio) jacks.

Connecting a CD Player

To connect a CD player to the receiver, connect the CD player’s left and right output jacks to the receiver’s L and R CD IN jacks.

8

Preparing Your Receiver

Connecting Video Sources

Note: If your VCR is monaural, use a Y- adapter (available at your local RadioShack store) to connect the VCR’s audio output to both the L and R audio inputs on the receiver.

If you connect two video sources such as VCRs, laser disc (LD) players, or digital video disc (DVD) players to your receiver, you can use the receiver to switch between viewing the sources. You can also use the receiver to easily record from the video sources to the source connected to VCR/TAPE 1.

OUT	IN	IN	TO MONITOR TV
VIDEO			VIDEO OUT

IN	REC PLAY	OUT	IN
L
R
PHONO	TAPE2	VCR/
	MONITOR	TAPE 1
	GND
V
V	L	R	R

V	V	R	L	L	R
		VIDEO		AUDIO
			REC	PLAY
		OUT		L
		IN		R
			REC	PLAY
			INPUT OUTPUT

VCR

L

IN IN

v L

OUT

R

LD/

DVD CD CONTROL

R	v
	L

R	L	V
		V
	AUDIO	VIDEO
	OUT	OUT
	L	VIDEO
		IN

R

VCR

LD/DVD Player

TV Monito

Connect phono cables from a VCR’s audio outputs to the receiver’s VCR/TAPE 1 or LD/DVD IN (audio) jacks. Then connect phono cables from the receiver’s VCR TAPE 1 OUT (audio) jacks to the VCR’s audio input jacks.

Connect video cables from each video source’s video outputs to the receiver’s VCR/TAPE 1 or LD/DVD VIDEO IN jacks. Then connect video cables from the receiver’s VCR/TAPE 1 VIDEO OUT jack to the VCR’s video input.

Connecting a Video Monitor

The monitor (or TV with baseband video input) you connect to the VIDEO OUT terminal can monitor any program you connect to the receiver’s VCR/TAPE 1 or LD/DVD input jacks. Connect a video cable from the receiver’s VIDEO OUT TO MONITOR TV jack to the monitor’s video input.

9

Preparing Your Receiver

Connecting the Antennas

In many cities, the supplied indoor AM loop and FM antennas provide adequate reception.

AM Antennas

Assemble the included antenna’s base by swinging the base in the direction of the arrow and inserting the antenna’s bottom tabs into the base’s slot. Then attach the antenna wires to the AM LOOP ANTENNA and GND terminals (bottom two terminals).

Place the antenna on a flat surface and rotate it for the best AM reception.

If the receiver is in a rack or on a shelf and there is no room for the AM loop antenna, use two screws (not supplied) to mount the base on the wall or another location as shown.

Notes:

• Keep the AM loop antenna connected even when you use another indoor antenna or an outdoor AM antenna.

• Ensure the antenna does not touch the receiver or other metal objects.

AM Loop Antenna

FM	AM
UNBAL 75 LOOP ANTENNA
GND	GND
ANTENNA
Outdoor AM Antenna
FM	AM
UNBAL 75	LOOP ANTENNA
GND	GND

ANTENNA

•Do not place the antenna near a CD player, a personal computer, or a TV set

•If the wire between your AM loop antenna and receiver is too short, you can add extra wire, available at your local RadioShack store.

You can also use a RadioShack shortwave antenna kit (Cat. No. 278758), which makes an excellent outdoor AM antenna.

Connect the outdoor AM antenna wire to the receiver’s AM terminal, as shown.

AM Loop Antenna

Note: For the best results, use 75-ohm coaxial cable to connect an outdoor antenna to the receiver.

FM Antennas

Connect the supplied FM antenna to the FM UNBAL 75Ω terminal and extend it as shown.

FM Antenna

FM	AM
UNBAL 75	LOOP ANTENNA
GND	GND

ANTENNA

For better FM reception, you can also use a rabbit-ear TV antenna (for indoor use only) or an outdoor VHF TV antenna. To connect the TV antenna to the receiver, you need a VHF/UHF/FM splitter (not included). RadioShack stores carry a full line of quality outdoor antennas and antenna connection accessories.

10