!
LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904
Single Supply Dual
Operational Amplifiers
Utilizing the circuit designs perfected for Quad Operational Amplifiers, these dual operational amplifiers feature low power drain, a common mode input voltage range extending to ground/VEE, and single supply or split supply operation. The LM358 series is equivalent to one−half of an LM324.
These amplifiers have several distinct advantages over standard operational amplifier types in single supply applications. They can operate at supply voltages as low as 3.0 V or as high as 32 V, with quiescent currents about one−fifth of those associated with the MC1741 (on a per amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The output voltage range also includes the negative power supply voltage.
Features
•Short Circuit Protected Outputs
•True Differential Input Stage
•Single Supply Operation: 3.0 V to 32 V
•Low Input Bias Currents
•Internally Compensated
•Common Mode Range Extends to Negative Supply
•Single and Split Supply Operation
•ESD Clamps on the Inputs Increase Ruggedness of the Device without Affecting Operation
•Pb−Free Packages are Available
•NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
http://onsemi.com
|
|
|
|
PDIP−8 |
|
|
N, AN, VN SUFFIX |
||
8 |
|
|
CASE 626 |
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
SOIC−8 |
8 |
|
|
D, VD SUFFIX |
|
|
|
|
CASE 751 |
|
1 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
Micro8] |
|
|
DMR2 SUFFIX |
||
|
|
|
||
1 |
|
|
CASE 846A |
|
|
|
|
|
|
PIN CONNECTIONS |
||||
Output A 1 |
|
|
8 |
V |
|
|
|
|
CC |
2 |
− |
|
7 |
Output B |
Inputs A |
+ |
|
|
|
3 |
− |
6 |
Inputs B |
|
V /Gnd 4 |
|
+ |
5 |
|
|
|
|||
EE |
|
|
|
|
|
(Top View) |
|
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 10 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking section on page 11 of this data sheet.
♥ Semiconductor Components Industries, LLC, 2006 |
1 |
Publication Order Number: |
June, 2006 − Rev. 22 |
|
LM358/D |
LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904
3.0 V to VCC(max)
VCC
1
2
VEE/Gnd
Single Supply
VCC
1.5 V to VCC(max)
1
2
1.5 V to VEE(max)
VEE
Split Supplies
Figure 1.
Bias Circuitry
Common to Both
Output Amplifiers
|
|
|
|
Q15 |
|
VCC |
|
|
|
|
|
|
|
|
|
Q16 |
|
Q14 |
|
Q22 |
|
|
|
|
|
||
|
|
|
|
|
Q13 |
|
Q19 |
|
|
|
40 k |
|
|
|
|
|
|
|
|
|
|
|
5.0 pF |
|
Q12 |
|
Q24 |
|
|
|
|
|
|
|
|
|
|
|
25 |
|
Q23 |
Q18 |
|
Q20 |
|
|
|
|
Inputs |
|
|
|
|
Q11 |
|
|
|
|
|
|
|
|
|
|
|
|
Q9 |
|
|
Q17 |
|
Q21 |
|
|
|
|
|
|
Q6 |
Q7 |
|
|
Q25 |
|
|
|
|
|
||
Q2 |
|
Q5 |
|
|
Q1 |
2.4 k |
|
|
|
Q8 |
|
Q10 |
|
|
|
|
|
|
||
Q3 |
Q4 |
Q26 |
|
|
2.0 k |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VEE/Gnd |
Figure 2. Representative Schematic Diagram
(One−Half of Circuit Shown)
http://onsemi.com
2
LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904
MAXIMUM RATINGS (TA = +25°C, unless otherwise noted.)
Rating |
|
Symbol |
Value |
Unit |
|
|
|
|
|
Power Supply Voltages |
|
|
|
Vdc |
Single Supply |
|
VCC |
32 |
|
Split Supplies |
|
VCC, VEE |
±16 |
|
Input Differential Voltage Range (Note 1) |
|
VIDR |
±32 |
Vdc |
Input Common Mode Voltage Range (Note 2) |
|
VICR |
−0.3 to 32 |
Vdc |
Output Short Circuit Duration |
|
tSC |
Continuous |
|
Junction Temperature |
|
TJ |
150 |
°C |
Thermal Resistance, Junction−to−Air (Note 3) |
Case 846A |
RqJA |
238 |
°C/W |
|
Case 751 |
|
212 |
|
|
Case 626 |
|
161 |
|
|
|
|
|
|
Storage Temperature Range |
|
Tstg |
−65 to +150 |
°C |
ESD Protection at any Pin |
|
Vesd |
2000 |
V |
Human Body Model |
|
|
|
|
Machine Model |
|
|
200 |
|
|
|
|
|
|
Operating Ambient Temperature Range |
LM258 |
TA |
−25 to +85 |
°C |
|
|
|
||
|
LM358, LM358A |
|
0 to +70 |
|
|
LM2904/LM2904A |
|
−40 to +105 |
|
|
LM2904V, NCV2904 (Note 4) |
|
−40 to +125 |
|
|
|
|
|
|
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
1.Split Power Supplies.
2.For supply voltages less than 32 V the absolute maximum input voltage is equal to the supply voltage.
3.All RqJA measurements made on evaluation board with 1 oz. copper traces of minimum pad size. All device outputs were active.
4.NCV2904 is qualified for automotive use.
http://onsemi.com
3
LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904
ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = GND, TA = 25°C, unless otherwise noted.)
|
|
|
LM258 |
|
|
LM358 |
|
|
LM358A |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Characteristic |
Symbol |
Min |
Typ |
Max |
Min |
Typ |
|
Max |
Min |
|
Typ |
|
Max |
Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Offset Voltage |
VIO |
|
|
|
|
|
|
|
|
|
|
|
|
mV |
VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VO ] 1.4 V, RS = 0 W |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = 25°C |
|
− |
2.0 |
5.0 |
− |
2.0 |
|
7.0 |
− |
|
2.0 |
|
3.0 |
|
TA = Thigh (Note 5) |
|
− |
− |
7.0 |
− |
− |
|
9.0 |
− |
|
− |
|
5.0 |
|
TA = Tlow (Note 5) |
|
− |
− |
7.0 |
− |
− |
|
9.0 |
− |
|
− |
|
5.0 |
|
Average Temperature Coefficient of Input Offset |
DVIO/DT |
− |
7.0 |
− |
− |
7.0 |
|
− |
− |
|
7.0 |
|
− |
mV/°C |
Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = Thigh to Tlow (Note 5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Offset Current |
IIO |
− |
3.0 |
30 |
− |
5.0 |
|
50 |
− |
|
5.0 |
|
30 |
nA |
TA = Thigh to Tlow (Note 5) |
|
− |
− |
100 |
− |
− |
|
150 |
− |
|
− |
|
75 |
|
Input Bias Current |
IIB |
− |
−45 |
−150 |
− |
−45 |
|
−250 |
− |
|
−45 |
|
−100 |
|
TA = Thigh to Tlow (Note 5) |
|
− |
−50 |
−300 |
− |
−50 |
|
−500 |
− |
|
−50 |
|
−200 |
|
Average Temperature Coefficient of Input Offset |
DIIO/DT |
− |
10 |
− |
− |
10 |
|
− |
− |
|
10 |
|
− |
pA/°C |
Current |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = Thigh to Tlow (Note 5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Common Mode Voltage Range (Note 6), |
VICR |
0 |
− |
28.3 |
0 |
− |
|
28.3 |
0 |
|
− |
|
28.5 |
V |
VCC = 30 V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCC = 30 V, TA = Thigh to Tlow |
|
0 |
− |
28 |
0 |
− |
|
28 |
0 |
|
− |
|
28 |
|
Differential Input Voltage Range |
VIDR |
− |
− |
VCC |
− |
− |
|
VCC |
− |
|
− |
|
VCC |
V |
Large Signal Open Loop Voltage Gain |
AVOL |
50 |
100 |
− |
25 |
100 |
|
− |
25 |
|
100 |
|
− |
V/mV |
RL = 2.0 kW, VCC = 15 V, For Large VO Swing, |
|
|
|
|
|
|||||||||
TA = Thigh to Tlow (Note 5) |
|
25 |
− |
− |
15 |
− |
|
− |
15 |
|
− |
|
− |
|
Channel Separation |
CS |
− |
−120 |
− |
− |
−120 |
− |
− |
|
−120 |
|
− |
dB |
|
1.0 kHz ≤ f ≤ 20 kHz, Input Referenced |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Common Mode Rejection |
CMR |
70 |
85 |
− |
65 |
70 |
|
− |
65 |
|
70 |
|
− |
dB |
RS ≤ 10 kW |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Supply Rejection |
PSR |
65 |
100 |
− |
65 |
100 |
|
− |
65 |
|
100 |
|
− |
dB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Voltage−High Limit |
VOH |
|
|
|
|
|
|
|
|
|
|
|
|
V |
TA = Thigh to Tlow (Note 5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCC = 5.0 V, RL = 2.0 kW, TA = 25°C |
|
3.3 |
3.5 |
− |
3.3 |
3.5 |
|
− |
3.3 |
|
3.5 |
|
− |
|
VCC = 30 V, RL = 2.0 kW |
|
26 |
− |
− |
26 |
− |
|
− |
26 |
|
− |
|
− |
|
VCC = 30 V, RL = 10 kW |
|
27 |
28 |
− |
27 |
28 |
|
− |
27 |
|
28 |
|
− |
|
Output Voltage−Low Limit |
VOL |
− |
5.0 |
20 |
− |
5.0 |
|
20 |
− |
|
5.0 |
|
20 |
mV |
VCC = 5.0 V, RL = 10 kW, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = Thigh to Tlow (Note 5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Source Current |
IO + |
|
|
|
|
|
|
|
|
|
|
|
|
mA |
VID = +1.0 V, VCC = 15 V |
|
20 |
40 |
− |
20 |
40 |
|
− |
20 |
|
40 |
|
− |
|
TA = Thigh to Tlow (LM358A Only) |
|
|
|
|
|
|
|
|
10 |
|
− |
|
− |
|
Output Sink Current |
IO − |
|
|
|
|
|
|
|
|
|
|
|
|
|
VID = −1.0 V, VCC = 15 V |
|
10 |
20 |
− |
10 |
20 |
|
− |
10 |
|
20 |
|
− |
mA |
TA = Thigh to Tlow (LM358A Only) |
|
|
|
|
|
|
|
|
5.0 |
|
− |
|
− |
mA |
VID = −1.0 V, VO = 200 mV |
|
12 |
50 |
− |
12 |
50 |
|
− |
12 |
|
50 |
|
− |
mA |
Output Short Circuit to Ground (Note 7) |
ISC |
− |
40 |
60 |
− |
40 |
|
60 |
− |
|
40 |
|
60 |
mA |
Power Supply Current (Total Device) |
ICC |
|
|
|
|
|
|
|
|
|
|
|
|
mA |
TA = Thigh to Tlow (Note 5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCC = 30 V, VO = 0 V, RL = ∞ |
|
− |
1.5 |
3.0 |
− |
1.5 |
|
3.0 |
− |
|
1.5 |
|
2.0 |
|
VCC = 5 V, VO = 0 V, RL = ∞ |
|
− |
0.7 |
1.2 |
− |
0.7 |
|
1.2 |
− |
|
0.7 |
|
1.2 |
|
5. LM258: Tlow = −25°C, Thigh = +85°C |
|
LM358, LM358A: Tlow = 0°C, Thigh |
= +70°C |
|
|
|
|
|
|
|||||
LM2904/LM2904A: Tlow = −40°C, Thigh = +105°C |
|
LM2904V & NCV2904: Tlow = −40°C, Thigh = +125°C |
|
|
||||||||||
NCV2904 is qualified for automotive use. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6.The input common mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of the common mode voltage range is VCC − 1.7 V.
7.Short circuits from the output to VCC can cause excessive heating and eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers.
http://onsemi.com
4
LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904
ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = Gnd, TA = 25°C, unless otherwise noted.)
|
|
|
|
LM2904 |
|
|
LM2904A |
LM2904V, NCV2904 |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Characteristic |
Symbol |
|
Min |
Typ |
|
Max |
Min |
|
Typ |
Max |
Min |
Typ |
Max |
Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Offset Voltage |
VIO |
|
|
|
|
|
|
|
|
|
|
|
|
mV |
VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VO ] 1.4 V, RS = 0 W |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = 25°C |
|
|
− |
2.0 |
|
7.0 |
− |
|
2.0 |
7.0 |
− |
− |
7.0 |
|
TA = Thigh (Note 8) |
|
|
− |
− |
|
10 |
− |
|
− |
10 |
− |
− |
13 |
|
TA = Tlow (Note 8) |
|
|
− |
− |
|
10 |
− |
|
− |
10 |
− |
− |
10 |
|
Average Temperature Coefficient of Input Offset |
DVIO/DT |
|
− |
7.0 |
|
− |
− |
|
7.0 |
− |
− |
7.0 |
− |
mV/°C |
Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = Thigh to Tlow (Note 8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Offset Current |
IIO |
|
− |
5.0 |
|
50 |
− |
|
5.0 |
50 |
− |
5.0 |
50 |
nA |
TA = Thigh to Tlow (Note 8) |
|
|
− |
45 |
|
200 |
− |
|
45 |
200 |
− |
45 |
200 |
|
Input Bias Current |
IIB |
|
− |
−45 |
|
−250 |
− |
|
−45 |
−100 |
− |
−45 |
−250 |
|
TA = Thigh to Tlow (Note 8) |
|
|
− |
−50 |
|
−500 |
− |
|
−50 |
−250 |
− |
−50 |
−500 |
|
Average Temperature Coefficient of Input Offset |
DIIO/DT |
|
− |
10 |
|
− |
− |
|
10 |
− |
− |
10 |
− |
pA/°C |
Current |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = Thigh to Tlow (Note 8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Common Mode Voltage Range (Note 9), |
VICR |
|
0 |
− |
|
24.3 |
0 |
|
− |
24.3 |
0 |
− |
24.3 |
V |
VCC = 30 V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCC = 30 V, TA = Thigh to Tlow |
|
|
0 |
− |
|
24 |
0 |
|
− |
24 |
0 |
− |
24 |
|
Differential Input Voltage Range |
VIDR |
|
− |
− |
|
VCC |
− |
|
− |
VCC |
− |
− |
VCC |
V |
Large Signal Open Loop Voltage Gain |
AVOL |
|
25 |
100 |
|
− |
25 |
|
100 |
− |
25 |
100 |
− |
V/mV |
RL = 2.0 kW, VCC = 15 V, For Large VO Swing, |
|
|
|
|
|
|||||||||
TA = Thigh to Tlow (Note 8) |
|
|
15 |
− |
|
− |
15 |
|
− |
− |
15 |
− |
− |
|
Channel Separation |
CS |
|
− |
−120 |
|
− |
− |
|
−120 |
− |
− |
−120 |
− |
dB |
1.0 kHz ≤ f ≤ 20 kHz, Input Referenced |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Common Mode Rejection |
CMR |
|
50 |
70 |
|
− |
50 |
|
70 |
− |
50 |
70 |
− |
dB |
RS ≤ 10 kW |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Supply Rejection |
PSR |
|
50 |
100 |
|
− |
50 |
|
100 |
− |
50 |
100 |
− |
dB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Voltage−High Limit |
VOH |
|
|
|
|
|
|
|
|
|
|
|
|
V |
TA = Thigh to Tlow (Note 8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCC = 5.0 V, RL = 2.0 kW, TA = 25°C |
|
|
3.3 |
3.5 |
|
− |
3.3 |
|
3.5 |
− |
3.3 |
3.5 |
− |
|
VCC = 30 V, RL = 2.0 kW |
|
|
22 |
− |
|
− |
22 |
|
− |
− |
22 |
− |
− |
|
VCC = 30 V, RL = 10 kW |
|
|
23 |
24 |
|
− |
23 |
|
24 |
− |
23 |
24 |
− |
|
Output Voltage−Low Limit |
VOL |
|
− |
5.0 |
|
20 |
− |
|
5.0 |
20 |
− |
5.0 |
20 |
mV |
VCC = 5.0 V, RL = 10 kW, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TA = Thigh to Tlow (Note 8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Source Current |
IO + |
|
20 |
40 |
|
− |
20 |
|
40 |
− |
20 |
40 |
− |
mA |
VID = +1.0 V, VCC = 15 V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output Sink Current |
IO − |
|
|
|
|
|
|
|
|
|
|
|
|
|
VID = −1.0 V, VCC = 15 V |
|
|
10 |
20 |
|
− |
10 |
|
20 |
− |
10 |
20 |
− |
mA |
VID = −1.0 V, VO = 200 mV |
|
|
− |
− |
|
− |
− |
|
− |
− |
− |
− |
− |
mA |
Output Short Circuit to Ground (Note 10) |
ISC |
|
− |
40 |
|
60 |
− |
|
40 |
60 |
− |
40 |
60 |
mA |
Power Supply Current (Total Device) |
ICC |
|
|
|
|
|
|
|
|
|
|
|
|
mA |
TA = Thigh to Tlow (Note 8) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCC = 30 V, VO = 0 V, RL = ∞ |
|
|
− |
1.5 |
|
3.0 |
− |
|
1.5 |
3.0 |
− |
1.5 |
3.0 |
|
VCC = 5 V, VO = 0 V, RL = ∞ |
|
|
− |
0.7 |
|
1.2 |
− |
|
0.7 |
1.2 |
− |
0.7 |
1.2 |
|
8. LM258: Tlow = −25°C, Thigh = +85°C |
|
LM358, LM358A: Tlow = 0°C, Thigh = +70°C |
|
|
|
|
||||||||
LM2904/LM2904A: Tlow = −40°C, Thigh = +105°C |
|
LM2904V & NCV2904: Tlow = −40°C, Thigh = +125°C |
|
|
||||||||||
NCV2904 is qualified for automotive use. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9.The input common mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of the common mode voltage range is VCC − 1.7 V.
10.Short circuits from the output to VCC can cause excessive heating and eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers.
http://onsemi.com
5