Onkyo TX-NR535 User Manual

0 (0)

TX-NR535

AV RECEIVER

Basic Manual

Advanced Manual found here

http://www.onkyo.com/manual/txnr535/adv/en.html

En

Before Start

About the Basic Manual

The Basic Manual leads you through the fundamental steps to enjoy the AV Receiver from connections to TV, speaker system and playback devices, to necessary functions for playback. As well as that, Basic Manual informs you with the instructions on frequently used functions. Besides, there is another part of the manual called Advanced Manual to inform you with more detailed information, which we have decided to publish on the web from the ecological point of view.

Advanced Manual

Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.

Details on AM/FM playback

Playing Music Files on a USB Storage Device

Listening to Internet Radio

Playing Music with DLNA

Playing Music Files in a Shared Folder

Operating Music Files with the Remote Controller

Using the Listening Modes

Advanced Settings

Operating Other Components with the Remote Controller

Connecting/Operating Onkyo product with RI jack.

Updating the Firmware

Details on Troubleshooting

Reference Information

Advanced Manual found here

http://www.onkyo.com/manual/txnr535/adv/en.html

Features

The unit is designed to be connected in between the TV and the playback devices such as Blu-ray disc player. Video signal from the playback devices will be sent through the unit to the TV and audio will be reproduced with the speakers creating Dolby Digital or other kind of surround sound field. The unit has many in/out jacks on its rear panel which allows you to connect a lot of playback devices simultaneously. Playback can be switched by selecting

the input selector buttons. For playback of CEC compliant devices, input will be switched automatically.

Equipped with 5 channel amplifier

Equipped with 4K 60 Hz Passthrough-compatible HDMI IN/OUT jacks

Supports the HDMI Through function which allows transmission from playback devices to the TV in standby state

Supports ARC (Audio Return Channel)

Supports USB storage playback

Supports variety of network functions such as Internet Radio, DLNA, etc.

Supports Wi-Fi and Bluetooth

A/V Sync Control Function to correct deviation of audio and video

Zone2 function which allows you to play a different source in another room from the main room

T-D (Theater-Dimensional) listening mode which allows you to enjoy the virtual surround sound field

192 kHz/24 bit D/A converter

Automatic speaker setup available using supplied calibrated microphone (AccuEQ Room Calibration)

32 bit DSP (Digital Signal Processor) with excellent calculation performance

Supports playback of MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD via network and USB storage device

Supplied Accessories

 

 

 

 

 

Indoor FM antenna

--- (1)

 

 

 

 

 

 

AM loop antenna ---

(1)

 

 

 

 

 

 

Color labels for speaker cable

(1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote controller (RC-879M)

(1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Batteries (AA/R6) ---

(2)

 

 

 

 

 

 

Power cord (Taiwanese model) ---

(1)

Speaker setup microphone --- (1)

The number in parenthesis indicates the quantity. On packaging, the letter at the end of the product name indicates the color.

2

Step 1: Connections

Personal computer

HDMI

TV

OUT

 

 

HDMI

HDMI cable

IN

HDMI

HDMI

 

OUT

HDMI

 

OUT

OUT

Game console

 

Set-top box/Digital

Satellite/Cable

video recorder, etc.

set-top box, etc.

1 Connecting the TV and players

Important: The power cord must be connected only after all other connections are completed.

HDMI cable connection

The unit has many HDMI jacks on its rear panel and each of them corresponds to an input selector button of the same name on the front panel. For example, a Blu-ray Disc player will be connected to the IN 1 jack and the BD/DVD button on the front panel will be used to listen to the playback sound (if the player is CEC compliant, input will be switched automatically). If you add another Blu-ray Disc player, you can use any other jack than IN 1. It is possible to change assignment of the input jacks and input selector buttons. For how to make settings, see the Advanced Manual (http://

www.onkyo.com/manual/txnr535/adv/en.html).

To connect the TV and the unit, connect the HDMI OUT jack of the unit and the HDMI input jack of the TV with an HDMI cable. With this connection, it becomes possible to display the setting screen of the unit on the TV or transmit video/audio signals from the player to the TV. If your TV supports ARC (Audio Return Channel), it is possible to play the TV sound with the AV receiver's speakers with this connection only.

If your TV does not support ARC, you need, in addition to the HDMI OUT jack connection, a digital optical cable connection between the digital audio out optical jack of

the TV and the DIGITAL IN OPTICAL jack of the unit or an analog audio cable connection between the audio output jack of the TV and the TV/CD analog audio input jack of the unit.

¼¼To use the ARC function, connect to the ARC compatible HDMI jack of the TV.

Blu-ray Disc/

HDMI DVD player

OUT

¼¼Select an appropriate connection for your TV.

TV

AUDIO

DIGITAL

OPTICAL

OUT

OUT

Connection with a TV not supporting ARC

The unit supports the HDMI Through function that allows transmission from players to the TV even if the unit is in standby.

It is necessary to make appropriate settings to enable the HDMI linked system function, ARC function and HDMI Through function. See the section 4 of "Step 2: Setting Up".

3

Connecting Components without HDMI

The video/audio jacks other than HDMI jacks also have a preassigned input selector button on the front panel. See the name of the input selector button shown with the jack when connecting the device. It is possible to change the assignment if necessary. For more information, see the Advanced Manual (http://www.onkyo.com/manual/txnr535/adv/en.html). Note that when connecting the player to the 2 COMPONENT VIDEO IN jacks, you need to connect the TV to the 2 COMPONENT VIDEO OUTPUT jacks. Also note that when connecting the player to the 3 composite video input jack, you need to connect the TV to the 4 MONITOR OUT jack.

1DIGITAL IN jacks: A player with a digital audio out optical jack or digital coaxial audio out jack can be connected. To enjoy digital surround sound including Dolby Digital and DTS, use one of these connections or the HDMI cable connection.

2COMPONENT VIDEO jacks: A TV with component video input jacks or a player with component video output jacks can be connected.

3VIDEO/AUDIO IN jacks: A player with a composite video output jack or RCA audio output jacks can be connected.

4MONITOR OUT V jack: A TV with a composite video input jack can be connected.

1

2

3

4

If the connected turntable does not have built-in audio equalizer, you need to install an external audio

equalizer between the unit and the turntable. Contact the manufacturer for more information.

Step 1: Connections

Type of cables

Video/audio transmission

HDMI cable: Enables digital

transmission of video/audio signals and control signals between devices via single cable connection.

¼¼Use high speed HDMI cable when playing back 4K 1080p high definition video.

Audio transmission

Digital optical cable: Transmits digital audio. The audio quality is the same as

that of the digital coaxial cable.

¼¼As the digital in optical jack of the unit has a cover, push in the cable against the cover as it is turned inside.

Digital coaxial cable: Transmits digital audio. The audio quality is the same as that of the digital optical cable.

Analog audio (RCA) cable: Transmits analog audio signals.

Video transmission

Component video cable: Transmits higher quality video signals than those of the composite video cable.

Composite video cable: Transmits analog video signals.

4

Onkyo TX-NR535 User Manual

2 Connecting speakers

Important: The power cord must be connected only after all other connections are completed.

12 3

6

45

1 2 Front speakers

3Center speaker

45 Surround speakers

6Subwoofer

¼¼Up to two subwoofers can be connected.

It is ideal to install the front speakers and center speaker at the height not too far from that of the screen. As for the surround speakers, it is recommended to install at the position slightly backward of the listening position and higher than the listener's ears, since it is preferable to obtain a diffused sound rather than a direct sound. As a bass sound reproduced by subwoofer is less directional, it is possible to place it at any position. Consider the best installation position where a bass sound can be clearly heard by listening to actual playback.

Connect speakers with 6 Ω to 16 Ω impedance. Using a speaker with less impedance than the supported value may result in failure.

Front R

Connection of each speaker: Correctly connect + and -. Using the colored labels for speaker cables will help correct connection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround R

Surround L

 

 

 

 

 

 

 

1/2"-5/8"(12-15 mm)

Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. Make correct connection between the unit's jacks and

Step 1: Connections

Front L

Center

Subwoofer with built-in power amplifier

speaker's jacks (+ to + and - to -) for each channel. If connection is wrong, a bass sound may become poor due to reverse phase. Attaching the supplied colored speaker cable

5

labels to the + side on the both ends of each channel's cable will help correct connection. The subwoofer jack supports connection of a subwoofer with built-in power amplifier. Set the cut-off filter selection switch of the subwoofer to DIRECT. If the subwoofer does not have a cut-off filter selection switch but has a cut-off frequency adjusting dial, turn it to the maximum frequency. If your subwoofer does not have built-in power amplifier, you can connect a power amplifier between the unit and the subwoofer.

The speaker setting is 5.1 ch at the time of purchase. You can change it manually or by using automatic speaker setting.

Short-circuiting the + cable and - cable or contacting the cable core to the rear panel of the unit may cause failure. Also do not connect two or more cables to one speaker jack or one speaker to several jacks.

3 Other connections

AM/FM antenna connections

Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception.

AM loop antenna (supplied)

Indoor FM antenna (supplied)

Fix with a tack on the wall.

(North American and

(European, Australian

Taiwanese models)

and Asian models)

Assemble the AM loop antenna (supplied).

When using commercially available banana plugs: tighten the speaker terminals to the end and then insert the banana plugs. Do not insert the cable core directly into the center hole of the speaker terminal. (North American model)

Step 1: Connections

Network connection

You can enjoy Internet radio and DLNA by connecting the unit to LAN. The unit can be connected to the router with an Ethernet cable or to the wireless LAN router with WiFi connection. In case of wired connection, connect the Ethernet cable to the Ethernet port. For Wi-Fi setup, see the section 3 of "Step 2: Setting Up".

Internet radio

 

 

 

 

 

Router

PC

 

 

 

 

 

 

 

 

 

 

 

 

NAS

 

 

 

 

 

 

 

 

 

 

 

 

Headphones connection

Connect stereo headphones with a standard plug (1/4 inch or ø 6.3 mm) to the PHONES jack. Sound from the speakers will be off while you are using the headphones.

If you selected any other listening mode than Pure Audio (European, Australian and Asian models), Stereo, Mono and Direct, connecting headphones will switch the listening mode to Stereo.

6

Loading...
+ 14 hidden pages