Size:
510.73 Kb
Download

HTP-518_SKS-HT518_En.fmPage1 Wednesday, March 12, 2008 3:57 PM

Contents

5.1ch Home Theater Speaker Package

HTP-518SKS-HT518

Getting Started

 

Important Safety Instructions ...........

2

Precautions........................................

3

Package Contents..............................

3

Getting to know Your Speaker

 

Package ......................................

4

SKF-518F FRONT SPEAKER

SKC-518C CENTER SPEAKER

SKM-518S SURROUND SPEAKER

SKW-518

(HTP-518) POWERED SUBWOOFER

 

 

SKW-501

(SKS-HT518) POWERED SUBWOOFER

Installing & Using

 

 

 

Connecting the Speakers...................

6

 

 

Power Cord Precautions....................

9

 

 

Adjustment........................................

9

 

 

Operating Precautions.......................

9

Instruction Manual

Thank you for purchasing an Onkyo home theater speaker package. Please read this manual thoroughly before using your new speakers. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your speaker package.

Please retain this manual for future reference.

Appendix

 

Troubleshooting ..............................

10

Specifications..................................

11

En

PORTABLE CART WARNING
S3125A

HTP-518_SKS-HT518_En.fmPage 2 Wednesday, March 12, 2008 3:57 PM

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-typeplug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supplycord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-outparts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and follow local regulations when disposing of batteries.

18.If you install the apparatus in a built-ininstallation, such as a bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-likegap for warm air to escape.

2

HTP-518_SKS-HT518_En.fmPage 3 Wednesday, March 12, 2008 3:57 PM

Precautions

1. AC Fuse

The fuse is located inside the chassis and is not userserviceable. If power does not come on, contact your Onkyo authorized service station.

2. Care

From time to time you should wipe off the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solution of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since these may damage the finish or remove the panel lettering.

Use a vacuum cleaner to remove dust from hard-to-reachgrilles.

3. Power WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (AC 220-240V, 50/60 Hz(SKW-501),AC 230, 50 Hz(SKW-518))written on the rear panel.

The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.

Auto standby function does not fully shutdown the SKW-518/SKW-501.If you do not intend to use theSKW-518/SKW-501,remove the power cord from the AC outlet.

For Canadian models

For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle pour les Canadien

Sur les modèles dont la fiche est polarisee: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

The alphabet displayed at the end of the product name found in catalogs and on package represents the color of the system. Though the color varies, the specifications and operations are the same.

Package Contents

Make sure your box contains all of the items below. If anything is missing, contact the nearest Onkyo dealer.

• Front speakers

• Speaker cable for front

(SKF-518F)

speakers 3.5 m

 

 

(Red)

(White)

Center speaker

• Speaker cable for center

 

(SKC-518C)

speaker 3.5 m

 

 

 

(Green)

Surround speakers

• Speaker cables for surround

 

(SKM-518S)

speakers 9 m

 

 

(Blue)

(Gray)

• Subwoofer

 

 

 

or

 

SKW-518(HTP-518)

SKW-501(SKS-HT518)

• RCA cable for sub-

• 4 floor pads for the

woofer connection

subwoofer

16 thin rubber stoppers, 12 thick rubber stoppers

*SKW-501(SKS-HT518):

How to detach the power-plugadapter :

The SKS-HT518ships with thepower-plugadapter already attached. If the adapter does not match with your AC outlet, remove the adapter

3

HTP-518_SKS-HT518_En.fmPage 4 Wednesday, March 12, 2008 3:57 PM

Getting to know Your Speaker Package

Front, Center, and Surround speakers (SKF-518F,SKC-518C,SKM-518S)

Rear

SKF-518F

2

A Speaker terminals

SKC-518C

2

3

3

2

3

1

2

 

1

 

 

 

 

These push terminals are for connecting the speaker to the AV receiver with the supplied speaker cables. The supplied speaker cables are color-codedfor easy identification. Simply connect each cable to thesame-coloredpositive speaker terminal.

BKeyhole slots

These keyhole slots can be used to wall-mountthe speaker (see page 8).

CSpeaker mount/bracket inserts

These threaded inserts can be used to attach the speaker to a speaker mount or bracket (see page 8).

Note:

Use commercially available machine screws to attach the speaker to a speaker mount or bracket. Rrequire M5 (5 mm) screws.

Caution:

The front grilles are not designed to be removed so do not attempt to remove them forcibly, as this will damage them.

SKM-518S

1

4

HTP-518_SKS-HT518_En.fmPage 5 Wednesday, March 12, 2008 3:57 PM

Getting to know Your Speaker Package—Continued

Subwoofer (SKW-518/SKW-501)

Front

SKW-518SKW-501

4

4

Rear

SKW-518/SKW-501

5 6

To AC outlet

DSTANDBY/ON indicator

Red: Subwoofer in standby mode Blue: Subwoofer on

With the Auto Standby function, the SKW-518/SKW-501automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, theSKW-518/SKW-501automatically enters Standby mode.

EOUTPUT LEVEL control

This control is used to adjust the volume of the subwoofer.

FLINE INPUT

This RCA input should be connected to the subwoofer pre out on your AV receiver with supplied RCA cable.

Note:

Using the Floor Pads for Subwoofer

If the subwoofer is placed on a hard floor (wood, vinyl, tile, etc.) and playback is very loud, the subwoofer's feet may damage the flooring. To prevent this, place the supplied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer.

SKW-518

SKW-501

Pad

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver.

5

HTP-518_SKS-HT518_En.fmPage 6 Wednesday, March 12, 2008 3:57 PM

Connecting the Speakers

Read the following before connecting your speakers:

Turn off your receiver before making any connections.

Pay close attention to speaker wir-

ing polarity. Connect positive (+) terminals to only positive (+) terminals, and negative (–)terminals to only negative(–)terminals. If the speakers are wired incorrectly, the sound will be out of phase and will sound unnatural.

Be careful not to short the positive and negative wires. Doing so may damage your amp.

Connecting the Speaker Cables

Use the supplied cables to connect each speaker’s input terminals to the corresponding speaker output terminals on your receiver.

Match the color of each cable to the corresponding speaker terminal.

To make a connection, while pressing

the terminal lever, insert the wire into the hole, and then release the lever. Make sure that the terminals are grip-

ping the bare wires, not the insulation.

Subwoofer

Surround

Surround

Right

Left

Front Left

Front Right

Center

Gray

Blue

White

Green

Red

*

 

HDMI

IN 3

IN 2

IN 1

OUT

SURR SPEAKERS

FRONT SPEAKERS

 

ASSIGNABLE

 

 

 

 

L

L

DIGITAL IN

COMPONENT VIDEO

 

 

 

 

 

 

 

 

Y

 

 

 

 

AM

 

1

 

 

 

 

 

 

(DVD)

 

 

 

 

 

 

COAXIAL

CBL/SAT

VCR/DVR

DVD

MONITOR

 

CENTER SPEAKER

CB/PB

 

 

 

OUT

 

 

2

V

 

 

V

R

R

(CBL/SAT)

 

 

 

 

 

 

 

ANTENNA

 

 

 

 

CR/PR

 

 

 

 

FM

1

 

 

S

 

 

 

S

75

(VCR/DVR)

 

 

 

 

 

 

OPTICAL

IN 1(DVD)

OUT

 

 

 

 

 

 

IN 2

 

IN

OUT

IN

IN

 

2

ASSIGNABLE

 

 

 

(CD)

IN

OUT

IN

IN

OUT

IN

FRONT SURR CENTER

PRE OUT

ASSIGNABLE

 

 

 

 

 

 

 

SUB

 

L

 

L

 

 

 

L

WOOFER

 

R

 

R

 

 

 

R

 

REMOTE

 

 

 

SUB

CONTROL

 

 

 

 

 

 

 

WOOFER

CD

TAPE

CBL/SAT

VCR/DVR

DVD

*Using the supplied RCA cable, connect the subwoofer’s LINE INPUT to your AV receiver’s SUBWOOFER PRE OUT.

6

HTP-518_SKS-HT518_En.fmPage 7 Wednesday, March 12, 2008 3:57 PM

Connecting the Speakers—Continued

Enjoying Home Theater

The Home Theater means that you can enjoy surround sound with a real sense of movement in your own home—justlike being in a movie theater or concert hall.

Front left and right speakers (SKF-518F)

These output the main sound. Their role in a home theater is to provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equally spaced from the TV. Angle them inward slightly so as to create a triangle, with the listener at the apex.

Center speaker (SKC-518C)

This speaker enhances the front left and right speakers, making sound movements distinct and providing a full sound image. For movies it’s used mainly for dialog.

Position it close to your TV (preferably on top) facing forward at about ear level, or at the same height as the front left and right speakers.

Subwoofer (SKW-518/SKW-501)

The subwoofer handles the bass sounds of the LFE (Low-FrequencyEffects) channel. The volume and quality of the bass output from your subwoofer will depend on its position, the shape of your listening room, and your listening position. In general, a good bass sound can be obtained by installing the subwoofer in a front corner, or atone-thirdthe way along the front wall, as shown.

Tip: To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room and choose the one that provides the most satisfying results.

Surround left and right speakers (SKM-518S)

These speakers are used for precise sound positioning and to add realistic ambience.

Position them at the sides of the listener, or slightly behind, about 60– 100 cm above ear level. Ideally they should be equally spaced from the listener.

Corner position

1/3 of wall position

7

HTP-518_SKS-HT518_En.fmPage 8 Wednesday, March 12, 2008 3:57 PM

Connecting the Speakers—Continued

Wall Mounting

The speakers can easily be wall mounted by using the keyhole slots. To prevent the speaker from vibrating against the wall, attach two of the supplied thick rubber stoppers to the rear of each speaker.

To mount the front or surround speakers vertically, use the keyhole slot shown to hang each speaker on a screw that’s securely screwed into the wall.

Front speaker (SKF-518F)

Keyhole slot for wall mounting

Thick rubber stoppers

Surround speaker (SKM-518S)

Keyhole slot for wall mounting

Thick rubber stoppers

Leave a gap of between 5 mm

Wall

and 10 mm between the wall

 

and the base of the screw head,

 

as shown.

 

(We recommend that you con-

 

sult a home installation profes- 5 mm – 10 mm

sional.)

 

Using Speaker Mounts/Brackets

Threaded inserts for machine screws are provided on the rear of each speaker for wall-mountingwith commercially available speaker mounts or brackets. M5 (5 mm) screws are required forwall-mounting.Refer to the manual supplied with your mounts or brackets for installation details.

Threaded insert

Note:

The portion of the screw that goes into the speaker’s threaded insert should be between 5 mm – 8 mm long.

Mount or bracket

5 mm

5 mm – 8 mm

To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall.

Using the Rubber Stoppers for a More Stable Platform

Center speaker (SKC-518C)

Keyhole slots for wall mounting

Thick

 

rubber

217 mm

stoppers

Caution:

A mounting screw’s ability to support a speaker depends on how well it’s anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 9 mm or less and a shank diameter of 4 mm or less. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes.

We recommend using the provided rubber stoppers to achieve the best possible sound from your speakers. The rubber stoppers prevent the speakers from moving, providing a more stable platform. Use thick stoppers for the center speaker, and thin stoppers for the other speakers.

Thin rubber stoppers

Bottom of

Bottom of

the SKF-

the SKM-

518F

518S

 

Thick rubber stoppers

Bottom of the

55 mm

 

SKC-518C

12 mm

 

8

HTP-518_SKS-HT518_En.fmPage 9 Wednesday, March 12, 2008 3:57 PM

Power Cord

Precautions

Before connecting the power cord, connect all of your speakers and AV components.

Turning on the SKW-518(HTP-518)/SKW-501(SKS-HT518)may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the SKW518(HTP-518)/SKW-501(SKS-HT518)into a different branch circuit.

Adjustment

Setting the Subwoofer Level

To set the level of the subwoofer, use the OUTPUT LEVEL control. Set it so that bass sounds are evenly balanced with the treble sounds from the other speakers. Because our ears are less sensitive to very low bass sounds, there’s a temptation to set the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what you think is the optimal level, and then back it off slightly.

MIN MAX

OUTPUT LEVEL

Operating Precautions

Placement

 

Using Close to a TV or Computer

 

 

 

The speaker cabinets are made out of wood and are therefore sensitive to extreme temperatures and humidity, do not put them in locations subject to direct sunlight or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen.

Do not put water or other liquids close to the speakers. If liquid is spilled over the speakers, the drive units may be damaged.

Speakers should only be placed on sturdy, flat surfaces that are free from vibration. Putting them on uneven or unstable surfaces, where they may fall and cause damage, will affect the sound quality.

Subwoofer is designed to be used in the upright vertical position only. Do not use it in the horizontal or tilted position.

If the unit is used near a turntable, CD player or DVD player, howling or slipping of sound may occur. To prevent this, move the unit away from the turntable, CD player or DVD player otherwise lower the unit’s output level.

TVs and computer monitors are magnetically sensitive devices and as such are likely to suffer discoloration or picture distortion when conventional speakers are placed nearby. To prevent this, the SKF-518FandSKC-518Cfeature internal magnetic shielding. In some situations, however, discoloration may still be an issue, in which case you should turn off your TV or monitor, wait 15 to 30 minutes, and then turn it back on again. This normally activates the degaussing function, which neutralizes the magnetic field, thereby removing any discoloration effects. If discoloration problems persist, try moving the speakers away from your TV or monitor. Note that discoloration can also be caused by a magnet or demagnetizing tool that’s too close to your TV or monitor.

Input Signal Warning

The speakers can handle the specified input power when used for normal music reproduction. If any of the following signals are fed to them, even if the input power is within the specified rating, excessive current may flow in the speaker coils, causing burning or wire breakage:

1.Interstation noise from an untuned FM radio.

2.Sound from fast-forwardinga cassette tape.

3.High-pitchedsounds generated by an oscillator, electronic musical instrument, and so on.

4.Amplifier oscillation.

5.Special test tones from audio test CDs and so on.

6.Thumps and clicks caused by connecting or disconnecting audio cables (Always turn off your amplifier before connecting or disconnecting cables.)

7.Microphone feedback.

9

HTP-518_SKS-HT518_En.fmPage 10 Wednesday, March 12,2008 3:57 PM

Troubleshooting

Symptom

Possible cause

Remedy

 

 

 

There’s no sound com-

The speaker cables are not connected

Check the speaker cables and correct as nec-

properly.

essary.

ing from certain speak-

 

 

The speaker configuration is not set cor-

Check the speaker configuration.

ers?

rectly.

 

 

 

 

 

 

The subwoofer does not

The power plug is not fully inserted into

Insert the power plug fully into the wall out-

turn on?

the wall outlet.

let.

 

 

 

 

The OUTPUT LEVEL control is set to

Turn up the OUTPUT LEVEL control.

 

minimum.

 

 

 

 

 

The RCA cable is not properly connected

Make sure that the RCA cable is properly

The subwoofer pro-

to the subwoofer’s LINE INPUT.

connected to the subwoofer’s LINE INPUT.

 

 

The level of the input signal was too low

Slightly increase the subwoofer pre out out-

duces no sound?

and the subwoofer entered Standby

put level on your AV receiver.

 

 

mode.

 

 

 

 

 

The Subwoofer configuration is not set

Check the subwoofer setting in the speaker

 

correctly.

configuration on your AV receiver.

 

 

 

The subwoofer pro-

The source material contain little or no

Choose source material with more bass con-

duces hardly any

bass content.

tent.

sound?

 

 

 

 

 

 

The RCA cable is not properly connected

Make sure that the RCA cable is properly

A humming sound can

to the subwoofer’s LINE INPUT.

connected to the subwoofer’s LINE INPUT.

be heard from the sub-

External interference from a TV or other

Move the subwoofer and RCA cable away

woofer?

electronic device is being picked up.

from the interference source. Make sure your

 

 

 

audio system is grounded properly.

 

 

 

10

HTP-518_SKS-HT518_En.fmPage 11 Wednesday, March 12,2008 3:57 PM

Specifications

Powered Subwoofer(HTP-518:SKW-518)

Type:

Bass-reflex

Power Supply:

AC 230 V/50 Hz

Power Consumption:

105 W

Input sensitivity/impedance:

140 mV/20 kΩ

Maximum output power:

90 W

Frequency response:

27 Hz–150Hz

Cabinet capacity:

24.2 L

Dimensions (W × H× D):

230 × 425× 383 mm

 

(incl. projection)

Weight:

9.4 kg

Drivers unit:

20 cm Cone

Other:

Auto Standby function

Powered Subwoofer(SKS-HT518:SKW-501)

Type:

Bass-reflex

Power supply:

AC 220-240V, 50/60 Hz

Power consumption:

105 W

Input sensitivity/impedance:

140 mV / 20 kΩ

Maximum output power:

90 W

Frequency response:

27 Hz–150Hz

Cabinet capacity:

24.5 L

Dimensions (W × H× D):

230 × 425× 412 mm

 

(incl. projection)

Weight:

9.1 kg

Drivers unit:

20 cm Cone

Other:

Auto Standby function

Front Speaker(SKF-518F)

Type:

2 Way Bass-reflex

Input sensitivity/impedance:

8 Ω

Maximum input power:

130 W

Output sound pressure level:

78 dB/W/m

Frequency response:

60 Hz–50kHz

Crossover frequency:

4 kHz

Cabinet capacity:

1.8 L

Dimensions (W × H× D):

101 × 273× 121 mm

 

(incl. grille and projection)

Weight:

1.1 kg

Speaker:

8 cm Cone Woofer

 

2.5 cm Balanced Dome

 

(Tweeter)

Terminal:

Spring type color coded

Keyhole slot:

2

Threaded insert:

5 mm screw, Depth 8 mm × 1

Grille:

Fixed

Other:

Magnetic shielding

Center Speaker(SKC-518C)

Type:

Input sensitivity/impedance: Maximum input power: Output sound pressure level: Frequency response: Crossover frequency: Cabinet capacity: Dimensions (W × H× D):

Weight:

Speaker:

Terminal:

Keyhole slot:

Threaded insert:

Grille:

Other:

2 Way Bass-reflex

8 Ω

130 W

78 dB/W/m

60 Hz–50kHz

4kHz 1.8 L

273× 101× 106 mm (incl. grille and projection) 1.1 kg

8cm Cone Woofer

2.5 cm Balanced Dome (Tweeter)

Spring type color coded

5mm screw, Depth 8 mm × 1 Fixed

Magnetic shielding

Surround Speaker(SKM-518S)

Type:

Impedance:

Maximum input power: Output sound pressure level: Frequency response: Cabinet capacity: Dimensions (W × H× D):

Weight:

Speaker:

Terminal:

Keyhole slot:

Threaded insert:

Grille:

Full-RangeBass Reflex 8 Ω

130 W

79 dB/W/m

70 Hz–22kHz

1.1 L

101 × 175× 116 mm (incl. grille and projection) 0.7 kg

8 cm Cone

Spring type color coded 1

5 mm screw, Depth 8 mm Fixed

Specifications and appearance are subject to change without prior notice.

11

HTP-518_SKS-HT518_En.fmPage 12 Wednesday, March 12,2008 3:57 PM

Sales & Product Planning Div. : 2-1,Nisshin-cho,Neyagawa-shi,OSAKA572-8540,JAPAN Tel:072-831-8023Fax:072-831-8163

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600Fax:201-785-2650http://www.us.onkyo.com/

ONKYO EUROPE ELECTRONICS GmbH

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0Fax:+49-8142-4401-555http://www.eu.onkyo.com/

ONKYO EUROPE UK Office

Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ UNITED KINGDOM Tel: +44-(0)1494-681515Fax:+44(0)-1494-680452

ONKYO CHINA LIMITED

Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118Fax:852-2428-9039http://www.ch.onkyo.com/

HOMEPAGE http://www.onkyo.com/

I0803-1

SN 29344830

(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.

 

12

* 2 9 3 4 4 8 3 0 *