FM STEREO/AM TUNER AMPLIFIER
R-805TX
Instruction Manual
FM STEREO / AM TUNER AMPLIFIER
VOLUME
|
|
|
|
INPUT |
|
ENERGY SAVE |
CD |
MD |
CDR/PC |
LINE/DVD |
|
|
|
|
|
ACOUSTIC |
|
|
|
|
|
PRESENCE |
|
|
|
FM |
AM |
TAPE |
|
STANDBY / ON |
|
|
WIDE RANGE AMPLIFIER |
OFF / 1 / 2 / 3 |
|
|
|
|
|
|
|
|
|
|
TECHNOLOGY |
|
|
PHONES |
FM MODE |
|
|
DISPLAY |
PRESET |
MEMORY |
|
|
|
|
|
CLEAR |
|
|
|
TUNING |
|
|
|
|
|
|
|
|
|
|
|
|
R-805TX |
|
FM STEREO / AM TUNER AMPLIFIER |
|
VOLUME |
||
|
|
|
|
|
|
|
|
|
|
INPUT |
|
ENERGY SAVE |
CD |
MD |
CDR |
LINE/DVD |
|
|
|
|
|
ACOUSTIC |
|
|
|
|
|
PRESENCE |
|
|
|
FM |
AM |
TAPE |
|
STANDBY / ON |
|
|
|
OFF / 1 / 2 / 3 |
|
PHONES |
FM MODE |
|
|
DISPLAY |
PRESET |
MEMORY |
|
|
|
|
|
CLEAR |
|
|
|
TUNING |
|
|
|
|
|
|
|
ACCUCLOCK |
|
WIDE RANGE AMPLIFIER |
|
|
|
|
TECHNOLOGY |
|
R-805TX |
||
|
|
|
|
|
|
Thank you for purchasing the ONKYO R-805TX FM Stereo/AM Tuner Amplifier. Please read this manual thoroughly before making any connection or turning on the power.
Follow these instructions to obtain optimum performance and maximum listening enjoyment from your new R-805TX. Please retain this manual for future reference.
English
Information Other Operation Preparations Connections using Before
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING |
|
AVIS |
RISK OF ELECTRIC SHOCK |
|
RISQUE DE CHOC ELECTRIQUE |
DO NOT OPEN |
|
NE PAS OUVRIR |
|
|
|
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Important Safeguards
1.Read Instructions – All the safety and operating instructions should be read before the appliance is operated.
2.Retain Instructions – The safety and operating instructions should be retained for future reference.
3.Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4.Follow Instructions – All operating and use instructions should be followed.
5.Cleaning – Unplug the appliance from the wall outlet before cleaning. The appliance should be cleaned only as recommended by the manufacturer.
6.Attachments – Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
7.Water and Moisture – Do not use the appliance near water –for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8.Accessories – Do not place the appliance on an unstable cart, stand, tripod, bracket, or table.The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mounting of the appliance should follow the manu-
facturer’s instructions, and
should use a mounting PORTABLE CART WARNING
accessory recommended by the manufacturer.
9.An appliance and cart combination should be moved with care. Quick stops, excessive force, and S3125A
uneven surfaces may cause the appliance and cart combination to overturn.
10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. The appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 20 cm (8 in.) and an opening behind the appliance.
11.Power Sources – The appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
12.Grounding or Polarization – The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
2
14.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the appliance, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.
15.Lightning – For added protection for the appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.
16.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17.Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
18.Object and Liquid Entry – Never push objects of any kind into the appliance through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.
19.Servicing – Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20.Damage Requiring Service – Unplug the appliance form the wall outlet and refer servicing to qualified service personnel under the following conditions:
A.When the power-supply cord or plug is damaged,
B.If liquid has been spilled, or objects have fallen into the appliance,
C.If the appliance has been exposed to rain or water,
D.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation,
E.If the appliance has been dropped or damaged in any way, and
F.When the appliance exhibits a distinct change in performance – this indicates a need for service.
21.Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22.Safety Check – Upon completion of any service or repairs to the appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operation condition.
23.Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
24.Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN
WIRE
GROUND 
CLAMP 
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
S2898A
3
Precautions
1. Warranty Claim
You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number.
2. Recording Copyright
Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.
3. AC Fuse
The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onkyo authorized service station.
4. Care
From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solution of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since these could damage the finish or remove the panel lettering.
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.
Setting the STANDBY button to standby does not shut off the power completely. So the power cord should be removed from the AC outlet when the unit is not used for a prolonged time.
For British model
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue : Neutral Brown : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
IMPORTANT
A 5 ampere fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amperes and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET.
If in any doubt, please consult a qualified electrician.
4
For U.S. model
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
FCC Information for User
CAUTION:
The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
For Canadian model
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
Modele pour les Canadien
Sur les modèles dont la fiche est polarisée: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.
Memory Preservation
This unit does not require memory preservation batteries. A built-in memory power backup system preserves the contents of the memory during power failures and even when the unit is unplugged. The unit must be plugged in order to charge the back-up system.
The memory preservation period after the unit has been unplugged varies depending on climate and placement of the unit. On the average, memory contents are protected over a period of a few weeks after the last time the unit has been unplugged. This period is shorter when the unit is exposed to a highly humid climate.
5
Main Features
•20 Watts per channel into 4 ohms DIN
•Low impedance drive discrete output stage
•Accoustic Presence
•RDS (Radio Data System) PS only (European model)
•FM/AM random 30 Stations Preset Tuning
•Timer Play (Weekday,Weekend),Sleep & Timer Rec
•Automatic Scan Tuning (FM only)
•FM TUNED Indicator
•Audio Muting (operable via remote control)
•Battery-free Backup System to Protect Memory Contents
•Motor driven Volume control
•Head phone Jack
•
Compatible Remote Control Included
•Blushed Alminume Front Panel
•Processor In/Out (other than U.S. & Canadian models)
Supplied accessories
Check that the following accessories are supplied with this unit.
|
|
|
|
|
|
FM indoor antenna x 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AM loop antenna x 1 |
||||||
Remote controller x 1 (RC-456S)
Batteries x 2
(Size AA, R6, or UM-3)
75/300 ohm antenna adapter x 1 (Available on the models
other than U.S., Canadian, and European models)
Declaration of Conformity
We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY
declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. 
GERMERING, GERMANY
A.HORIUCHI
ONKYO EUROPE ELECTRONICS GmbH
6
Table of contents
Before using |
|
Supplied accessories ............................................................................................................ |
6 |
Connections |
|
Connecting to the ONKYO Separate Collection Series components ............................... |
8 |
Connecting to components other than the Separate Collection Series ........................ |
13 |
Connecting speaker systems............................................................................................. |
16 |
Antenna connections ........................................................................................................ |
17 |
Connecting the AC power cord (mains lead) .................................................................. |
20 |
Preparations |
|
Preparing the remote controller ...................................................................................... |
21 |
Operation |
|
Setting the Clock ............................................................................................................... |
22 |
Choosing the required source .......................................................................................... |
26 |
Adjusting the sound.......................................................................................................... |
27 |
Muting/Listening with the headphones .......................................................................... |
28 |
Recording........................................................................................................................... |
29 |
Receiving stations.............................................................................................................. |
30 |
Naming a preset station ................................................................................................... |
33 |
Receiving RDS (European models only) ........................................................................... |
36 |
Using the timer.................................................................................................................. |
37 |
Other Information |
|
Troubleshooting................................................................................................................ |
44 |
Specifications..................................................................................................................... |
46 |
Index to parts and controls............................................................................................... |
48 |
7
Connecting to the ONKYO Separate Collection Series components
This section introduces you to the other Separate Collection Series system components and their convenient system functions, followed by connecting instructions.
The following Separate Collection Series components are commercially available:
•K-505TX ............ Stereo Cassette Tape Deck (Not available in U.S. and Canada)
•C-705TX ............ Compact Disc (CD) Player (Not available in U.S. and Canada)
•C-707CHX ......... Compact Disc (CD) Changer (Only available in U.S. and Canada)
•MD-105TX .........Minidisc (MD) Recorder (Not available in U.S., Canada and Europe)
•CDR-205TX ....... Audio CD Recorder (Not available in U.S. and Canada)
Note that the available components may vary according to the area.
Combination use of the unit with the above system components enables you to operate the following convenient functions:
•Auto Power On
–You can turn on the unit by pressing the STANDBY/ON switch on one of the system components.
–You can turn on all the system components at the same time by pressing the STANDBY/ ON switch on the unit.
You can turn off each component not in use independently afterwards.
•Direct Change
Press the following button on the component you want to operate to switch the unit’s input selector automatically to that component:
–The play button on the CD player (or changer), MD recorder or stereo cassette tape deck.
•Remote Control Operation
All the system components can be operated using the supplied remote controller.
•Program Timer
You can operate timer playback and recording using this unit.
•Sleep Timer
You can fall asleep to a music/radio program using this unit.
•CD Dubbing
Simple CD dubbing using a stereo cassette tape deck, MD recorder or CD recorder is possible with the pressing of a single button (CD dubbing function using an MD recorder is not available on the C-707CH). (Refer to the K-505TX, MD-105TX or CDR-205TX Instruction Manual for more information).
•CD/MD/CDR Synchro Recording
If a connected MD recorder, CD recorder, or cassette tape deck is in recording stand-by mode, pressing the play button on the CD player will automatically start recording. (Refer to the MD-105TX, C-705TX, CDR-205TX, or K-505TX instruction manual for more information.)
•Dubbing a specific track from CD
You can specify a track on a CD and easily dub it to a connected MD recorder or CDR205TX. (Refer to the MD-105TX or CDR-205TX instruction manual for more information.)
8
Arranging the system components
Combination example 1
Select the CD player C-705TX (or CD changer C-707CHX), CD recorder, and stereo cassette tape deck K-505TX in addition to this unit. When you arrange these components, stack them as shown below.
Vertical way stacking |
Horizontal way stacking |
|
|
This unit (R-805TX) |
This unit (R-805TX) |
CD recorder |
|
(CDR-205TX) |
|||
|
|||
Stereo cassette tape |
|
|
|
deck (K-505TX) |
|
|
|
CD recorder (CDR-205TX) |
|
|
|
CD player (C-705TX) or |
Stereo cassette tape |
CD player (C-705TX) or |
|
CD changer (C-707CHX) |
deck (K-505TX) |
CD changer (C-707CHX) |
Combination example 2
Select the CD player C-705TX, CD recorder and MD recorder MD-105TX in addition to this unit. When you arrange these components, stack them as shown below.
Vertical way stacking |
|
Horizontal way stacking |
|
|
This unit (R-805TX) |
This unit (R-805TX) |
CD recorder |
|
(CDR-205TX) |
||
|
|
MD recorder (MD-105TX)
CD recorder (CDR-205TX)
MD recorder (MD-105TX) CD player (C-705TX)
CD player (C-705TX)
Tip
In addition to the above combination examples, you can also connect both the MD recorder MD-105TX and stereo cassette tape deck K-505TX with the CD recorder CDR-205TX, CD player C-705TX, and this unit.
9
Connecting to the ONKYO Separate Collection Series components
Connecting to the audio connector
Before connecting
•Do not connect the unit’s AC power cord (mains lead) to a wall outlet (the mains) until you have completed all the other connections, including 
and AC OUTLET connections on page 12 and “Connecting speaker systems” on page 16.
•On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors.
•Please refer to the instruction manual for each component when you make any connections.
|
|
Audio connection |
|
|
|
cable |
|
To L connector |
(White) |
(White) |
To L connector |
To R connector |
(Red) |
(Red) |
To R connector |
• Insert the plug securely. If the connection is incomplete, noise or malfunction may result.
Improper connection
Insert completely
•When you use a digital audio optical cable, do not bend it sharply nor coil it tightly.
•Bundling an audio connection cable with the power cord or speaker cord may degrade the sound quality.
•Be sure to use the 
cable, supplied with each component (except for the R-805TX) to connect to the 
remote control connector. If the connection is incomplete, you will be unable to operate the device using the remote controller.
•CD players and MD recorders use heat-sensitive parts. Do not place them on top of the amplifier.
Note:
To connect both the MD recorder MD-105TX and stereo cassette tape deck K-505TX to the unit:
Connect the MD recorder to the unit following the “Connections for combination example 2” on the next page and connect the stereo cassette tape deck to the unit following the “Connections for combination example 1.”
The European model is shown in the following illustrations.
10
Connections for combination example 1
ANALOG |
|
INPUT |
OUTPUT |
(REC) |
(PLAY) |
L |
L |
R |
R |
Audio CD
Recorder (CDR-205TX)
CDR |
TAPE |
|
|
This unit (R-805TX) |
||||||||
OUT |
IN |
OUT |
IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
CDR |
|
TAPE |
|
|
L |
|
|
L |
|
|
L |
OUT |
IN |
OUT |
IN |
|
|
|
|
|
|
|
|
L |
|
|
L |
|
|
|
|
||
|
|
|
|
|
AM |
|
|
|
|
|
|
CAUTION: |
|
|
|
|
|
R |
|
|
R |
|
|
|
SPEAKER |
|
|
|
|
|
|
|
|
|
REMOTE |
|
R |
IMPEDANCE |
|
|
|
|
|
|
|
|
|
CONTROL |
|
4 OHMS MIN. |
|
|
|
|
|
|
CD |
OUT MD IN |
LINE/DVD |
PROCESSOR |
SPEAKERS |
/SPEAKER |
||
R |
|
|
R |
|
L |
|
|
|
|
|
L |
|
|
|
|
75FM |
|
|
|
|
|
|
AC OUTLET |
||
|
|
|
|
|
R |
|
|
|
|
|
R |
AC 230-240V |
|
|
|
|
REMOTE |
|
|
|
|
OUT |
IN |
|
50Hz |
|
|
|
|
|
|
|
|
|
100W MAX. |
|||
(REC) |
(PLAY) |
(REC) |
(PLAY) |
|
|
|
|
|
|
|
|
SWITCHED |
CONTROL |
|
|
|
|
|
|
|
|
||||
CD |
OUT MD IN LINE/DVD PROCESSOR |
L |
L |
R 
R
(REC) (PLAY) |
OUT |
IN |
|
ANALOG |
|
|
|
|
REMOTE |
|
|
|
|
CONTROL |
|
DIGITAL |
|
L |
L |
INPUT 1 |
INPUT 2 |
OUTPUT |
R |
R |
|
|
|
K |
L |
|
|
|
DIGITAL
OPTICAL
INPUT 1 INPUT 2 OUTPUT
For the Asian model:
In addition to a CD recorder, you can connect a digital audio processor to this connector.
|
ANALOG |
INPUT |
OUTPUT |
|
OUTPUT |
||
|
(REC) |
(PLAY) |
|
L |
|
L |
|
|
|
|
|
|
|
D |
|
R |
|
R |
|
|
|
|
|
ANALOG |
|
OUTPUT |
L |
AC OUTLET |
AC 230-240V 50Hz |
|
|
UNSWITCHED |
|
100W MAX. |
R |
REMOTE |
DIGITAL OUTPUT |
|
|
|
|
|
CONTROL |
|
|
|
|
|||
DIGITAL OUTPUT |
|
1 |
OPTICAL |
|
INPUT |
OUTPUT |
REMOTE |
|
2 |
"CLASS 1 LASER |
(REC) |
(PLAY) |
|||
|
|
|
|
|
CONTROL |
||
PRODUCT" |
L |
OPTICAL |
D |
1 |
2 |
R |
AC OUTLET
AC 230-240V 50 Hz UNSWITCHED 100W MAX.
: Signal flow |
CD player (C-705TX) or |
Stereo cassette |
CD changer (C-707CHX) |
tape deck (K-505TX) |
Connections for combination example 2
CD |
OUT MD IN LINE/DVD PROCESSOR |
L |
L |
R |
|
R |
(REC) (PLAY) |
OUT |
IN |
ANTENNA |
|
CDR |
TAPE |
|
|
L |
|
|
OUT |
IN |
OUT |
IN |
|
|
|
|
|
|
L |
|
|
L |
|
|
|
|
|
AM |
|
|
|
|
|
|
CAUTION: |
|
R |
|
|
R |
|
|
|
SPEAKER |
|
|
|
|
|
REMOTE |
|
R |
IMPEDANCE |
|
|
|
|
|
CONTROL |
|
4 OHMS MIN. |
|
|
CD |
OUT MD |
IN |
LINE/DVD |
PROCESSOR |
SPEAKERS |
/SPEAKER |
|
|
L |
|
|
|
|
|
L |
|
|
FM |
|
|
|
|
|
|
|
|
75 |
|
|
|
|
|
|
AC OUTLET |
|
R |
|
|
|
|
|
R |
AC 230-240V |
|
|
|
|
|
|
|
|
50Hz |
|
|
|
|
|
OUT |
IN |
|
SWITCHED |
|
|
|
|
|
|
100W MAX. |
||
This unit (R-805TX)
|
|
|
ANALOG |
|
|
||
ANALOG |
|
|
INPUT |
OUTPUT |
|
|
|
DIGITAL OUTPUT |
(REC) |
(PLAY) |
DIGITAL INPUT |
||||
OUTPUT |
|
|
|||||
|
|
OPTICAL |
L |
L |
|
OPTICAL |
|
L |
1 |
2 |
1 |
2 |
|||
|
|
||||||
|
|
|
R |
R |
|
|
|
R
|
ANALOG |
|
|
|
|
|
|
|
|
|
|
|
OUTPUT |
|
|
|
|
|
|
|
|
|
|
L |
|
|
|
AC OUTLET |
|
|
|
|
|
|
|
|
|
|
AC 230-240V |
50Hz |
|
|
|
|
|
|
|
|
|
|
|
UNSWITCHED |
|
|
|
|
|
|
|
|
REMOTE |
|
|
100W MAX. |
|
|
ANALOG |
|
|
|
|
R |
DIGITAL OUTPUT |
|
|
|
INPUT |
OUTPUT |
REMOTE |
|
|
||
CONTROL |
|
|
|
(REC) |
(PLAY) |
CONTROL |
DIGITAL INPUT |
||||
|
|
1 |
OPTICAL |
|
|
|
|
|
|
||
|
|
2 |
"CLASS 1 LASER |
L |
|
L |
|
|
OPTICAL |
||
|
|
|
|
|
|
1 |
2 |
||||
|
|
|
|
PRODUCT" |
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
R |
|
|
|
CD player (C-705TX) |
MD recorder (MD-105TX) |
|
: Signal flow |
|
|
|
|
|
Optical cable |
||
11
Connecting to the ONKYO Separate Collection Series components
Connecting the 
connectors and AC OUTLETS
Before connecting
•The hookups on page 11 is needed in addition to the 
(for remote control operations) and AC OUTLET (for power supply to each component) hookups on this page.
•Each component has two 
connectors. There is no difference between those connectors. The components may be connected in any order.
•The 
remote control cable for connecting the 
connectors is supplied with each component (not supplied with the unit).
Connections
To use the Clock/Timer function of this unit’s, connect the power cord as shown below and connect the 
remote control cable and audio connection cables (see page 11). Be sure to connect the power cord of this unit to an AC outlet that supplies continuous power.
MD recorder (MD-105TX)
CD recorder (CDR-205TX)
ANALOG
INPUT |
OUTPUT |
REMOTE |
|
|
(REC) |
(PLAY) |
CONTROL |
DIGITAL INPUT |
|
L |
|
L |
|
OPTICAL |
|
1 |
2 |
||
R 
R
ANTENNA |
|
CDR |
TAPE |
|
L |
OUT |
IN |
OUT |
IN |
||
|
L |
|
|
|
L |
|
AM |
|
|
|
|
|
|
CAUTION: |
ANALOG |
R |
|
|
|
R |
|
|
SPEAKER |
|
|
|
|
|
REMOTE |
R |
IMPEDANCE |
|
REMOTE |
|
|
|
|
|
CONTROL |
4 OHMS MIN. |
|
CONTROL |
DIGITAL |
CD |
OUT MD |
IN |
LINE/DVD |
PROCESSOR |
SPEAKERS |
/SPEAKER |
L |
L |
INPUT 1 INPUT 2 OUTPUT |
L |
|
L |
|
|
|
|
FM |
|
|
|
|
|
|
75 |
|
|
AC OUTLET |
R |
R |
|
R |
|
R |
AC 230-240V |
|
|
|
|
|
|
50Hz |
K |
L |
|
|
OUT |
IN |
SWITCHED |
|
|
100W MAX. |
To wall outlet
This unit (R-805TX)
CD player (C-705TX) or CD changer (C-707CHX)
|
ANALOG |
|
|
|
|
|
|
|
|
OUTPUT |
|
|
|
|
|
|
|
L |
|
|
|
AC OUTLET |
|
|
|
|
|
|
|
AC 230-240V |
50Hz |
INPUT |
OUTPUT |
|
|
|
|
|
|
UNSWITCHED |
|
REMOTE |
||
|
|
|
|
100W MAX. |
|
(REC) |
(PLAY) |
|
R |
REMOTE |
DIGITAL OUTPUT |
|
|
|
|
CONTROL |
|
CONTROL |
|
|
L |
|
|
|||
|
|
|
OPTICAL |
|
|
|
|
|
|
|
1 |
2 |
"CLASS 1 LASER |
D |
|
|
|
PRODUCT" |
R |
Stereo cassette tape deck (K-505TX)
AC OUTLET
AC 230-240V 50 Hz UNSWITCHED 100W MAX.
•If the R-805TX is in Standby mode (only the display is lit) in the system, a small amount of power (for standby mode) is being supplied to the connected devices. If you do not wish to supply this power to the connected devices to save energy, press the ENERGY SAVE button on the R-805TX. (See page 20.)
12
Connecting to components other than the Separate Collection Series
Connecting audio/video equipment to audio connectors
Before connecting
•Do not connect the AC power cord (mains lead) to the wall outlet (the mains) until you have completed all the other connections including the sound processor connections on the next page, the 
connections on page 15, and the speaker connections on page 16.
•On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel.Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors.
Audio connection cable
To L connector |
(White) |
To R connector |
(Red) |
•Please refer to the instruction manual for each component when you make any connections.
• Insert the plug securely. If the connection is incomplete, noise or malfunction may result.
(White) |
|
To L connector |
|
||
(Red) |
|
To R connector |
|
Improper connection
Insert completely
Connections
CD recorder
REC |
PLAY |
INPUT |
OUTPUT |
For the Asian model:
In addition to a CD recorder, you can connect a digital audio processor to this connector.
: Signal flow
CDR |
TAPE |
||
OUT |
IN |
OUT |
IN |
|
|
|
|
L |
|
|
L |
R |
|
|
R |
(REC) |
(PLAY) |
(REC) |
(PLAY) |
CD |
OUT MD IN |
LINE/DVD |
|
L |
|
|
|
R |
|
|
|
|
(REC) |
(PLAY) |
|
Stereo cassette tape deck
REC |
PLAY |
INPUT |
OUTPUT |
This unit (R-805TX)
ANTENNA |
|
CDR |
TAPE |
|
|
L |
|
|
OUT |
IN |
OUT |
IN |
|
|
|
|
|
|
L |
|
|
L |
|
|
|
|
|
AM |
|
|
|
|
|
|
CAUTION: |
|
R |
|
|
R |
|
|
|
SPEAKER |
|
|
|
|
|
REMOTE |
|
R |
IMPEDANCE |
|
|
|
|
|
CONTROL |
|
4 OHMS MIN. |
|
|
CD |
OUT MD |
IN |
LINE/DVD |
PROCESSOR |
SPEAKERS |
/SPEAKER |
|
REMOTE |
L |
|
|
|
|
|
L |
|
75 |
|
|
|
|
|
|
AC OUTLET |
|
|
FM |
|
|
|
|
|
|
|
CONTROL |
R |
|
|
|
|
|
R |
AC 230-240V |
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
|
|
|
|
|
50Hz |
PROCESSOR |
|
|
|
|
OUT |
IN |
|
100W MAX. |
|
|
|
|
|
|
|
|
|
L
(illustration is European model)
R
OUT IN
OUTPUT |
REC |
PLAY |
AUDIO |
INPUT |
OUTPUT |
OUTPUT |
|
CD player |
MD recorder |
DVD, LD or Video equipment |
|
•Refer to page 14 for more information on how to connect a processing device such as a surround processor.
13
Connecting to components other than the Separate Collection Series
Connecting a sound processor (other than U.S. & Canadian models)
You can connect a sound processor (e.g. surround processor, graphic equalizer, etc.) to the unit.
Before connecting
•Disconnect the jumper plugs using the PROCESSOR connectors.
–Please retain them for future use.
–Never connect the jumper plugs to the other connectors, as this may cause the unit to malfunction, so that the sound is not reproduced.
–If you do not use the PROCESSOR connectors, connect two jumper plugs horizontally to the IN and OUT jacks firmly.
Connections
1 Remove the jumper plugs.
PROCESSOR
Jumper plug
IN
OUT
2 Connect the sound processor to the unit.
This unit (R-805TX)
ANTENNA |
|
CDR |
TAPE |
L |
OUT |
IN |
OUT |
IN |
|
|
L |
|
|
L |
AM |
|
|
|
CAUTION: |
R |
R |
|
|
SPEAKER |
|
REMOTE |
|
R |
IMPEDANCE |
|
CONTROL |
|
4 OHMS MIN. |
|
CD |
OUT MD IN LINE/DVD PROCESSOR |
SPEAKERS |
/SPEAKER |
|
L |
|
|
L |
|
FM |
|
|
|
|
75 |
|
|
|
AC OUTLET |
R |
|
|
R |
AC 230-240V |
|
|
|
|
50Hz |
|
OUT |
IN |
|
SWITCHED |
|
|
100W MAX. |
||
PROCESSOR
L
R
OUT IN
Sound processor INPUT
OUTPUT
: Signal flow
14
Connecting the 
remote control cables
If your other components are made by ONKYO and those components are equipped with 
connectors, you can control the 
-connected components with the supplied remote controller.
Before connecting
•The unit must be connected in the 
system hookups for 
control operations.
•Each component has two 
connectors. There is no difference between these connectors.
•The components may be connected in any order.
•The hookups on the previous page are necessary independently of the 
system hookups.
The illustration below is an example of a 
hookup.
Connections
This unit (R-805TX)
MD recorder
Stereo cassette tape deck
Audio CD recorder
CD player
remote control cable (supplied with every ONKYO component that has 
connectors except for the amplifier and receiver)
•This is not an example of stacking the components. For the example, refer to page 9.
AC outlet connection
You can connect the power cord from another audio device to the rear of the R- 805TX.
If the R-805TX is connected via an
ANTENNA |
|
CDR |
TAPE |
L |
OUT |
IN |
OUT |
IN |
|
|
L |
|
|
L |
AM |
|
|
|
CAUTION: |
R |
R |
|
|
SPEAKER |
|
REMOTE |
|
R |
IMPEDANCE |
|
CONTROL |
|
||
CD |
OUT MD IN LINE/DVD PROCESSOR |
SPEAKERS |
4 OHMS MIN. |
|
|
|
|
|
/SPEAKER |
L |
|
|
L |
|
FM |
|
|
|
|
75 |
|
|
|
AC OUTLET |
R |
|
|
R |
AC 230-240V |
|
|
|
|
50Hz |
|
OUT |
IN |
|
SWITCHED |
|
|
100W MAX. |
||
remote control cable to another Onkyo audio device that has a STANDBY/ON but-
ton, you can use the STANDBY/ON button
on the R-805TX to turn on and off the power to both R-805TX and connected
device, or place both devices in standby mode. When the R-805TX is turned on or
placed in standby mode, electric current is always supplied to the AC connector on the rear panel. If you press the ENERGY SAVE button while the R-805TX is in standby mode, the power to the connected audio device will be turned off one minute later. (See page 20.)
The shape and capacity of the AC outlet may differ depending on the area of purchase. Make sure that the capacity of other components connected to this unit does not exceed the capacity that is printed on the rear panel.
15
Connecting speaker systems
Connecting left and right speakers
Before connecting
•The load impedance of each speaker must be at least 4 ohms.
•Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resistance of the speaker cords may become too high, lowering the damping factor and causing the sound quality to deteriorate.
•Do not connect the speaker cord to the L and R connectors at the same time and do not connect two or more speakers to the same speaker connectors.
L |
L |
R |
R |
SPEAKERS |
SPEAKERS |
Preparing the speaker cords for connection
1 Strip 15 mm from |
2 Twist the stripped |
||||||
the end of each |
end of the cord. |
||||||
cord. |
|
|
|
||||
|
|
15mm |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
To prevent damage to circuits never short-circuit the positive (+) and negative (–) speaker wires.
NO
Connecting the speaker cords to the speaker connectors
|
L |
|
|
|
|
|
Right |
|
|
|
|
|
Left |
speaker - |
R |
|
|
|
|
- speaker |
|
SPEAKERS |
|
|
|
|
|
+ |
|
|
|
|
|
+ |
|
ANTENNA |
CDR |
TAPE |
|
L |
|
|
OUT |
IN OUT |
IN |
|
|
|
|
|
L |
|
L |
|
|
|
|
AM |
|
|
|
CAUTION: |
|
|
R |
|
R |
|
|
|
|
|
|
REMOTE |
|
SPEAKER |
|
|
|
|
R |
IMPEDANCE |
|
|
|
|
|
CONTROL |
||
|
|
CD |
OUT MD IN LINE/DVD PROCESSOR |
SPEAKERS |
4 OHMS MIN. |
|
|
|
|
|
|
|
/SPEAKER |
|
|
L |
|
|
L |
AC OUTLET This unit |
|
|
75 |
|
|
|
|
|
|
FM |
|
|
|
|
|
|
R |
|
|
R |
AC 230-240V |
|
|
|
|
|
|
50Hz |
|
|
|
|
OUT IN |
|
SWITCHED |
|
|
|
|
|
|
100W MAX. |
1 Turn the knob counter- |
2 Insert the |
stripped |
end |
3 Turn the knob clockwise |
||
clockwise to loosen. |
of the cord. |
|
|
|
to tighten. |
|
16
Loading...