Onkyo CR-N7 User Manual

4 (1)

CD Receiver

CR-N7

Instruction Manual

Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making any connections and plugging it in.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver.

Please retain this manual for future reference.

Contents

Getting Started ..........................

2

Connections ............................

14

Playing a Disc..........................

22

Listening to the Radio ...........

34

Clock and Timer ......................

44

Miscellaneous .........................

53

En

PORTABLE CART WARNING
S3125A

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and follow local regulations when disposing of batteries.

18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.

2

Precautions

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer.

3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

Some models have a voltage selector switch for compatibility with power systems around the world. Before you plug in such a model, make sure that the voltage selector is set to the correct voltage for your area.

5.Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.

6.Handling Notes

If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.

Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.

This unit’s top and rear panels may get warm after prolonged use. This is normal.

If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.

When you’ve finished using this unit, remove all discs and turn off the power.

7.Installing this Unit

Install this unit in a well-ventilated location.

Ensure that there’s adequate ventilation all around this unit, especially if it’s installed in an audio rack. If the ventilation is inadequate, the unit may overheat, leading to malfunction.

Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, shortening the life of the optical pickup.

Avoid damp and dusty places, and places subject to vibrations from loudspeakers. Never put the unit on top of, or directly above a loudspeaker.

Install this unit horizontally. Never use it on its side or on a sloping surface, because it may cause a malfunction.

If you install this unit near a TV, radio, or VCR, the picture and sound quality may be affected. If this occurs, move this unit away from the TV, radio, or VCR.

8.To Obtain a Clear Picture—This unit is a hightech, precision device. If the lens on the optical pickup, or the disc drive mechanism becomes dirty or worn, the picture quality may be affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or worn part replacement) every 1,000 hours of use depending on the operating environment. Contact your Onkyo dealer for details.

9.Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

Moisture may condense on the lens of the optical pickup, one of the most important parts inside this unit.

Moisture condensation can occur in the following situations:

The unit is moved from a cold place to a warm place.

A heater is turned on, or cold air from an air conditioner is hitting the unit.

In the summer, when this unit is moved from an air conditioned room to a hot and humid place.

The unit is used in a humid place.

Do not use this unit when there’s the possibility of moisture condensation occurring. Doing so

may damage your discs and certain parts inside this unit.

If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

K. MIYAGI

ONKYO EUROPE ELECTRONICS GmbH

3

Precautions—Continued

This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit.

To prevent being exposed to the laser beam, do not try to open the enclosure.

DANGER:

VISIBLE AND/OR INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

The label on the right is applied on the rear panel.

1.This unit is a CLASS 1 LASER PRODUCT and

employs a laser inside the cabinet.

2.To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

Features

Amplifier

26 W/Ch into 4 ohms, 1kHz

WRAT (Wide Range Amplifier Technology)

High Current, Low Impedance Drive

Discrete Output Stage Circuitry

Optimum Gain Volume Circuitry

3 Audio Inputs and 2 Outputs

Tone Control (Bass/Treble)

2 Step Super Bass Control

Subwoofer Pre Out

CD Player

Plays CDs, MP3 CDs, CD-Rs and CD-RWs

Optical Digital Output

Single-Bit D/A Converter

25 Track Programming

CD: 3 Play Modes (Normal/Random/Memory)

MP3 CD: 4 Play Modes (Normal/Random/Memory/ 1 Group)

Repeat Mode

Tuner & Others

4-Programmable Timer (Play or Rec/Once or Every)

Sleep Timer

30 FM/AM Presets

Automatic FM Scan Tuning

Battery-Free Memory Backup

Headphone Jack

RI-Dock Compatible Remote Control

Supplied Accessories

Make sure you have the following accessories:

Remote controller & two batteries (AA/R6)

Indoor FM antenna

AM loop antenna

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

4

Before Using This Unit

Installing the Batteries

1 Detach the battery cover by pressing the tab and pulling up the cover.

2 Insert two AA-size batteries into the battery compartment.

Carefully follow the polarity diagram (positive + and negative - symbols) inside the battery compartment.

3 After batteries are installed and seated correctly, attach the compartment cover.

Notes:

If the remote controller doesn’t work reliably, try replacing the batteries.

Don’t mix new and old batteries or different types of batteries.

If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion.

Using the Remote Controller

To use the remote controller, point it at the CD receiver’s remote control sensor, as shown below.

Remote control sensor

m .5 Approx.) ft (16

CD receiver

Notes:

The remote controller may not work reliably if the CD receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing.

If another remote controller of the same type is used in the same room, or the CD receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.

The remote controller may not work reliably if the CD receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.

The remote controller will not work if there’s an obstacle between it and the CD receiver’s remote con-

trol sensor.

5

Table of Contents

Basic Operations

 

Getting Started

 

Important Safety Instructions...............................

2

Precautions .........................................................

3

Features ..............................................................

4

Supplied Accessories ..........................................

4

Before Using This Unit ........................................

5

Installing the Batteries .....................................

5

Using the Remote Controller ...........................

5

Table of Contents ................................................

6

Part Names and Functions..................................

8

Front Panel ......................................................

8

Display.............................................................

9

Rear Panel.....................................................

10

Remote Controller .............................................

11

Disc Notes .........................................................

12

Connections

 

Connecting Antenna..........................................

14

Connecting Speakers ........................................

16

Connecting the Speakers ..............................

16

Placement......................................................

16

Connecting the Power Cord ..............................

21

First Time Setup (European model only).......

21

Turning Off ACCUCLOCK (European model

only)........................................................

21

Playing a Disc

 

Understanding Common Operations.................

22

Turning the Unit On and Standby ..................

22

Adjusting the Volume.....................................

22

Selecting a Source ........................................

22

Listening through the Headphones................

22

Adjusting Bass...............................................

23

Emphasizing the Low End Using the Remote

Controller ....................................................

23

Adjusting Treble.............................................

23

Muting the Sound ..........................................

23

Playing a CD .....................................................

24

Selecting the Track to Play............................

24

Locating a Particular Point in a Track............

24

Using the Remote Controller .........................

25

Changing the Display Information .................

25

Selecting MP3s..............................................

26

Displaying Information on MP3 Discs............

28

Advanced Operations

Connecting External Devices ...........................

17

About Connections .......................................

17

Cables & Jacks .............................................

17

Connecting a Subwoofer ..............................

17

Connection for TV Audio Signal....................

18

Connecting an Onkyo Stereo Cassette Tape

Deck .......................................................

18

Connecting an RI Dock (Remote Interactive

Dock) ......................................................

19

Connecting an Onkyo Compact Disc

 

Recorder ..........................................

20

Various Ways to Play CDs ...............................

29

Memory Playback .........................................

29

Random Playback.........................................

30

Repeat/1 Track Repeat Playback .................

30

Cancelling the Playback Mode .....................

31

MP3 Preferences..............................................

32

Setting the MP3 Preferences........................

32

6

Table of Contents—Continued

Basic Operations

 

Listening to the Radio

 

Programming Radio Stations ............................

34

Programming FM/AM Stations One by One –

Preset Write................................................

34

Programming FM Stations Automatically – Auto

Preset .........................................................

36

Listening to an FM/AM Station..........................

37

Adjusting the Antenna ...................................

37

Using the Remote Controller.........................

38

Manually Tuning a Broadcast Station ...........

38

Switching the Display Information .................

39

Receiving RDS..............................................

39

Clock and Timer

 

Setting the Clock...............................................

44

Setting ACCUCLOCK to Use a Specific

 

Station ..............................................

44

Setting the Clock Manually............................

45

Checking the Time and the Day of the

Week ..........................................

46

To Switch between the 12-hour and 24-hour

 

Displays ......................................................

46

Turning the Current Time Display On or Off

while the Unit is in Standby Mode .........

46

Using the Timer Functions ................................

47

About the Timers...........................................

47

About the Sleep Timer ..................................

47

Using the Sleep Timer...................................

48

Programming a Timer ...................................

49

Switching the Timer On and Off ....................

52

Viewing the Timer Settings ...........................

52

Miscellaneous

 

Troubleshooting ................................................

53

Specifications....................................................

56

Advanced Operations

 

Changing the FM/AM Preset Channels.............

40

Tips for Changing the Preset Channels ........

40

Copying a Preset Channel – Preset Copy.....

40

Erasing a Preset Channel – Preset Erase.....

41

Naming Preset Channels ..................................

42

Naming a Preset Channel .............................

42

Entering a Name ...........................................

42

Correcting and Erasing a Character..............

42

Inserting a Character.....................................

43

Erasing the Name Assigned to a Preset

 

Channel ................................................

43

Inputting Characters from the Remote

 

Controller..............................................

43

7

Part Names and Functions

Front Panel

1

 

Display

2 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 5 6 7 8 9 J K L M N O P Q R

The page numbers in parentheses show where you can find the main explanation for each item.

ARemote control sensor (5)

Receives signals from the remote controller.

BINPUT buttons (22, 34, 36, 37)

Enable you to select an input source.

CVOLUME control (22)

Adjusts the volume level.

DSTANDBY indicator (22)

Lights up in Standby mode.

ESTANDBY/ON button (21, 22, 51)

Press this button to turn on the power to the unit or place the unit in Standby mode.

FPHONES jack (22)

Connect a headphone mini plug here.

GCD disc tray (24)

Place a CD in the disc tray.

HREPEAT button (30, 31)

Repeats CD playback.

I/ buttons (24, 29, 34)

Fast-forward or reverse the track being played. These buttons also tune in a broadcast station or move the cursor when you input characters.

JGROUP button (26, 27)

Use this button to select a group on MP3 discs.

KDISPLAY button (25, 28, 39, 42)

Each time you press this button, the information on the display changes. This button also enables you to select the input character type.

LTIMER button (21, 44, 45, 48, 49, 52)

Press this button to enable the timer function or set current time.

MMULTI JOG dial (24)

Turn the dial to select a programmed station, playback track or groups. Press it to confirm the current setting.

NYES/MODE button (21, 29, 30, 31, 35, 38, 42)

Press this button to confirm the displayed settings for playback and other editing operations.

When input is CD, this button can be used to switch the playback modes.

OEDIT/NO/CLEAR button (29, 32, 34, 35, 36, 40, 41, 42)

Enables you to adjust settings for playback and select editing operations. It also cancels the displayed setting.

P/ button (24)

Starts or pauses CD playback.When you press this button during playback, the unit enters Pause mode.

Q button (24)

Stops CD playback.

R button (24)

Ejects a loaded CD.

8

Part Names and Functions—Continued

Display

1 2

3

 

4

5

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTING

 

 

 

 

 

 

 

C D

 

 

 

 

S.BASS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO

 

FM ST

RDS

 

 

 

MP3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIMER

1GR MEM RDM

NORMAL REPEAT 1

ALBUM ARTIST GROUP TRACK NAME

 

1 2

SOURCE GROUP

TITLE

 

TRACK

 

 

 

 

 

 

 

 

DISC TOTAL REMAIN

 

 

 

 

 

 

 

 

 

3

4

 

 

 

SLEEP

 

 

 

 

7 8 9J K L

M

N

O

1MUTING indicator

This indicator flashes while the CD receiver is muted.

BS.BASS indicator

This indicator lights up when the super bass is selected.

CTuning indicators

: This indicator lights up when the CD receiver is tuned into a radio station.

AUTO: This indicator lights up when the Auto Tuning mode is selected, and disappears when the Manual Tuning mode is selected.

RDS (European model only): This indicator lights up when the CD receiver is tuned to a radio station that supports RDS (Radio Data System).

FM ST: This indicator lights up when the CD receiver is tuned to a stereo FM station.

DPlayback mode indicators

1GR: Lights up when one group playback is selected.

MEM: Lights up when memory playback is selected.

RDM: Lights up when random playback is selected.

NORMAL: Lights up when normal playback is selected.

REPEAT: Lights up when repeat playback is selected for all the tracks.

REPEAT 1: Lights up when repeat playback is selected for a track.

ECD operation indicators

These indicators show the status of CD playback.

FMP3 indicator

This indicator lights up when a MP3 CD is loaded.

GSLEEP indicator

This indicator lights up when the Sleep function has been set.

HTIMER indicators

These indicators show the status of the timers.

: Lights up when timed recording has been set.

Numbers 1-4: Lights up when a timer has been set.

ISOURCE indicator

This indicator lights up when the source is displayed during playback.

JGROUP indicator

Lights up when the group number on MP3 discs is displayed.

KMessage area

Various information is displayed here, including preset number, tuning frequency, time, volume level, sleep time, mode settings, and so on.

LTITLE indicator

Lights up when the title (ID3 tag) is displayed.

MTRACK indicator

Lights up when the track number is displayed.

NALBUM/ARTIST/GROUP/TRACK NAME indicators

Each indicator lights up when album title (ID3 tag), artist name, group name, or track name is displayed, respectively.

ODISC TOTAL/REMAIN indicators

Each indicator lights up to display the total time or remaining time of a disc or track, respectively.

9

Part Names and Functions—Continued

Rear Panel

1 B C D 5 6 G

R

L

 

 

 

ANTENNA

PRE OUT

 

IN

 

 

 

 

 

OUT

 

 

 

IN

 

R

L

 

 

SPEAKERS

 

 

CAUTION:

 

 

 

SPEAKER IMPEDANCE

OUT

 

4 OHMS MIN. /SPEAKER

IN

R L

REMOTE

CONTROL

OPTICAL

DIGITAL OUT

H 9

The page numbers in parentheses show where you can find the main explanation for each item.

AHDD IN/OUT (19)

Here you can connect an RI Dock or a CD recorder.

BLINE IN (18)

These terminals are for connecting audio output of external devices such as TV or turntable with a built-in phono equalizer.

CTAPE IN/OUT (18)

This analog audio input and output are for connecting a recorder with an analog audio input and output (cassette, Mini Disc, etc.).

DAM ANTENNA (14, 15)

IOPTICAL DIGITAL OUT (20)

The optical output can be used to connect a CD recorder or other digital recorder with an optical digital input. The CD receiver’s CD signal is output through this terminal.

See pages 14-20 for connection information.

These push terminals are for connecting an AM antenna.

EFM ANTENNA (14, 15)

This jack is for connecting an FM antenna.

FPRE OUT (17)

The SUBWOOFER jack is for connecting a powered subwoofer.

GSPEAKERS (16)

These terminals are for connecting speakers.

H REMOTE CONTROL (18-20)

This (Remote Interactive) jack can be connected to an jack on another Onkyo component. The CD receiver’s remote controller can then be

used to control that component. To use , you must make an analog audio connection (RCA) between the CD receiver and the other component, even if they are connected digitally.

10

Remote Controller

RC-628S

 

 

K

A

L

B

 

3

M

N

 

 

O

 

P

4

Q

5

R

S

6

T

7

U

 

8

V

 

9

W

 

J

X

The page numbers in parentheses show where you can find the main explanation for each item.

ASTANDBY/ON button (22, 51)

Switches between power standby and on.

BSLEEP button (48)

Used to program the Sleep timer, which turns off the power to the unit at a specified time.

CNumber buttons (25, 27, 38)

Used to select a track or sort tracks for Memory playback. They also select a preset station or name a preset station.

DVOLUME / buttons (23, 25, 38)

Adjust the volume level.

E/ buttons (25, 29, 34, 38)

Fast-forward or reverse the track being played. These buttons also tune in a broadcast station or move the cursor when you input characters.

F/ buttons (25, 29, 38)

Selects the previous or next track. Each time you press one of these buttons, the track number skips forward or backward. These buttons also select programmed stations. For Onkyo stereo cassette tape decks which are sold separately, they function as rewind and fast forward buttons.

GCD operation buttons (25)

:Pauses playback.

:Stops playback.

:Starts playback.

HOperation buttons for an Onkyo RI Dock or CD recorder

:Pauses playback or recording.

:Stops playback or recording.

:Starts playback or resumes recording.

IOperation buttons for an Onkyo stereo cassette tape deck

For double cassette decks, only Deck B can be controlled.

:Plays the B side.

:Stops playback, recording, fast-forward, or rewind.

:Plays the A side.

JHDD PLAYLIST button

When input is HDD, skips up or down the play list.

KTIMER button (44, 45, 49)

Press this button to enable the timer function or set current time.

LCLOCK CALL button (46)

Press this button to display the current time.

MDISPLAY button (25, 28, 39, 43)

Each time you press this button, the information on the display changes. It also selects the character input type.

NEDIT/NO/CLEAR button (29, 32, 34, 35, 36, 40, 41, 43)

Enables you to adjust settings for playback and select editing operations. It also cancels the displayed setting.

OYES/MODE/SHUFFLE button (29, 30, 31, 35, 38, 43)

Press this button to confirm the displayed settings for playback and other editing operations.

When input is CD, this button can be used to switch the playback modes.

PREPEAT button (30, 31)

Repeats CD playback. This button is also available to operate Onkyo’s RI Dock, CD recorders and cassette tape decks.

QGROUP button (26, 27)

Use this button to select a group on MP3 discs.

RINPUT buttons (25, 34, 36, 37, 38)

Each time you press these buttons, the input source switches.

SMUTING button (23)

Lowers the volume level temporarily.

TENTER button (43)

Press this button to confirm the current setting.

UTUNER button

Switches input source to the tuner.

VTONE button (23)

Adjusts bass and treble.

WS.BASS button (23)

Adjusts the low end bass range.

XHDD ALBUMLIST button

When input is HDD, skips up or down the album list.

11

Disc Notes

Supported Discs

The CD receiver supports the following discs.

Disc

Logo

Format or file type

Audio CD

 

PCM

 

 

 

 

Audio CD, MP3

CD-R

 

MP3

 

 

 

 

Audio CD, MP3

CD-RW

 

MP3

 

 

CD Extra

 

Audio CD (Session 1),

 

MP3 (Session 2)

Some audio CDs use copy protection that doesn’t conform to the official CD standard. Since these are nonstandard discs, they may not play properly in the CD receiver.

The CD receiver supports CD-R and CD-RW discs. However, some CD-R and CD-RW discs may not work properly for any of the following reasons: disc burner characteristics, disc characteristics, the disc is damaged or dirty. See the manual supplied with your disc burner for more information. Condensation or dirt on the optical pickup lens can also affect playback.

The CD receiver supports 8 cm and 12 cm discs.

The CD receiver does not support disc types not listed.

Don’t use discs with an unusual shape, such as those shown below, because you may damage the CD receiver.

Don’t use discs that have residue from adhesive tape, rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the CD receiver and you may not be able to remove the disc properly.

Discs Made on Personal Computers

Discs made on personal computers, including those of a compatible format, may not work properly in the CD receiver because of incorrect settings in the disc burning software. Check the manuals supplied with your disc burning software for additional compatibility information.

MP3 Compatibility

MP3 discs must be ISO 9660 Level 1 or Level 2, Romeo or Joliet compliant. Supported formats: Mode 1, Mode 2 XA Form 1.

Folders can be up to eight levels deep.

MP3 files must be MPEG-1/MPEG-2 Audio Layer 3 format with a sampling rate of between 8 kHz and 48 kHz and a bit-rate of between 8 kbps and 320 kbps (128 kbps recommended). Incompatible files cannot be played.

Constant Bit Rate MP3 files are recommended, however, variable bit-rate (VBR) MP3 files between

8 kbps and 320 kbps are supported. (Playing times may display incorrectly.)

MP3 files must have a “.mp3” or “.MP3” file name extension. MP3 files without the proper extension will not be recognized. To prevent noise and malfunction, do not use these extensions for other types of files.

The CD receiver supports up to 499 MP3 files and folders. Files and folders in excess of this cannot be played. Note that if the file and folder structure is very complicated, the CD receiver may not be able to read or play all of the MP3 files on the disc.

Disc, file and folder names may contain up to 32 characters.

The maximum time that can be displayed for a single track is 99 minutes and 59 seconds.

The remaining time cannot be displayed when playing MP3 files.

MP3 file and folder names (excluding the extension) are shown on the display.

Multisession discs are supported, however, some multisession discs may take a long time to load and some may not load at all. When burning CDs we recommend that you use a single-session (disc-at-once), and select “Disc Close.”

Normally, the music in the audio session of a CD Extra disc is played. However, you can set the CD receiver so that it plays any MP3 files in the data session of a CD-R/RW disc instead. If the data session contains no MP3 tracks, the audio session will be played regardless. See “MP3 Preferences” on page 32 for more information.

The Emphasis is not supported.

12

Disc Notes—Continued

The following ID3 tags are supported: versions 1.0/1.1 and 2.2/2.3/2.4. Versions 2.5 and later are not supported. Normally, version 2.2/2.3/2.4 tags have priority and will be displayed regardless of the ID3 VER 1 preference on page 32.

For ID3 version 2 tags, the tag information recognized will be those embedded in the beginning of the file. We recommend that you include only title, artist name, and album name information in ID3 tags. Compressed, encrypted, and unsynchronized ID3 tags cannot be displayed.

Notes:

With CD-ROM, CD-R, and CD-RW discs that contain many files and folders, and files other than MP3s, it may take a long time to read the disc. We recommend that you include only MP3 files on your discs, use about 20 folders, and limit folder nesting to three levels deep.

In this manual, MP3 files are referred to as tracks. Also, folders (directories) are referred to as groups.

Disc Content Organization

CD

CDs contain tracks.

Track 1

Track 2

Track 3

Track 4

Track 5

 

 

 

 

 

 

 

 

 

 

Audio CD

MP3

MP3 discs contain MP3 tracks organized into groups.

Group 1

Group 2

Track 1 Track

2 Track 3

Track 1 Track 2

MP3

(CD-R/CD-RW)

 

Handling Discs

Never touch the underside of a disc. Always hold discs by the edge, as shown.

Underside

• Never attach adhesive tape or sticky labels to discs.

Cleaning Discs

For best results, keep your discs clean. Fingerprints and dust can affect the sound quality and should be removed as follows. Using a clean soft cloth, wipe from the center outwards, as shown. Never wipe in a circular direction.

To remove stubborn dust or dirt, wipe the disc with a damp soft cloth, and then dry it with a dry cloth.

Never use solvent-based cleaning fluids, such as thinner or benzine, commercially available cleaners, or antistatic sprays intended for vinyl records, because they may damage the disc.

Storing Discs

Don’t store discs in places subject to direct sunlight, or near heat sources.

Don’t store discs in places subject to moisture or dust, such as in a bathroom or near a humidifier.

Always store discs in their cases and vertically. Stacking, or putting objects on unprotected discs may cause warping, scratches, or other damage.

13

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The CD receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

AM antenna push terminals

FM antenna connector

R

L

 

 

IN

ANTENNA

PRE OUT

 

 

 

 

OUT

 

 

 

IN

 

R

L

 

 

SPEAKERS

OUT

 

 

 

I N

R L

REMOTE

CONTROL

OPTICAL

DIGITAL OUT

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1 Attach the FM antenna, as shown.

Insert the plug fully into the jack.

Once your CD receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2 Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

Caution: Be careful that you don’t injure yourself when using thumbtacks.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead (see page 15).

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use only.

1 Assemble the AM loop antenna, inserting the tabs into the base, as shown.

2 Connect both wires of the AM loop antenna to the AM push terminals, as shown.

(The antenna’s wires are not polarity sensitive, so they can be connected either way around). Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.

Push

Insert wire

Release

Once your CD receiver is ready for use, you’ll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception.

Keep the antenna as far away as possible from your CD receiver, TV, speaker cables, and power cords.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna (see page 15).

14

Connecting Antenna—Continued

Connecting an Outdoor FM Antenna

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

Connecting an Outdoor AM Antenna

If good reception cannot be achieved using the supplied AM loop antenna, an outdoor AM antenna can be used in addition to the loop antenna, as shown.

Outdoor antenna

Insulated antenna cable

AM loop antenna

Notes:

Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.

For best results, install the outdoor FM antenna well away from tall buildings, preferably with a clear line of sight to your local FM transmitter.

Outdoor antenna should be located away from possible noise sources, such as neon signs, busy roads, etc.

For safety reasons, outdoor antenna should be situated well away from power lines and other high-voltage equipment.

Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards.

Using a TV/FM Antenna Splitter

It’s best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as shown.

Outdoor AM antennas work best when installed outside horizontally, but good results can sometimes be obtained indoors by mounting horizontally above a window. Note that the AM loop antenna should be left connected.

Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards.

TV/FM antenna splitter

To CD receiver

To TV (or VCR)

15

Connecting Speakers

Connecting the Speakers

Connect the right channel speaker to the R speaker connector on the CD receiver, and the left channel speaker to the L speaker connector.

Connect the “+” connector on each speaker to the “+” connectors on the CD receiver, and connect the “–” connector on each speaker to the “–” connectors on the CD receiver. Use the red wires of the speaker cables to connect the “+”

connectors.

Right channel

Left channel

speaker

speaker

 

Red wire

 

 

R

L

 

 

SPEAKERS

Speaker

R

L

 

 

 

ANTENNA

PRE OUT

cable

 

 

R L

SPEAKERS

R L

DIGITAL OUT

1.Peel the insulation to expose the core wire and twist the core wire.

2.Pull down the lever and insert

the tip of the speaker cable.

3.Release the lever to affix the wire.

Be sure to connect speakers that have an impedance of 4 ohms to 16 ohms. Connecting a speaker with an impedance lower than 4 ohms may damage the speaker.

To prevent damage to circuits, never short-circuit the positive (+) and negative (–) speaker wires.

Do not connect the speaker cord to the L and R connectors at the same time (i.e., 1). Do not connect more than two speaker connectors to the same speaker (i.e., 2).

i.e., 1

 

 

 

i.e., 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Placement

The sound quality a speaker system reproduces varies greatly depending on room construction and area of the room in which it is installed, as well as the location and size of the furniture. For better-quality sound, observe the following precautions.

Placing the speaker system directly on the floor can result in undesirable boom, that is, sound with extremely heavy bass. Place each speaker on a speaker stand, concrete blocks, bricks or a rigid bookshelf.

High-quality bass sound cannot be obtained if the speakers are not seated on a stable speaker stand or other base.

To obtain a deeper bass sound, mount the speakers on lower speaker stands and place them in front of a wall of sufficient rigidity.

In many rooms, the furniture and walls affect the reproduced sound quality. For stereo sound reproduction, placing the right and left speakers in the same relative position produces the best results. If they are placed in extremely different positions, the rightand leftchannel balance will be adversely affected.

The ideal placement of the speaker system is as follows: Imagine an equilateral triangle and position the

right and left speakers on both ends of the base. The ideal listening position is at or slightly to the rear of the triangle apex.

Glazed doors or surrounding walls in front of the speaker system may resonate specific frequency ranges due to reflected sound. To eliminate this resonance, place some sound-absorbing material, such as a thick curtain, in front of the doors or walls.

Tips:

The speaker cabinet is made of wood and is therefore sensitive to extreme temperatures and humidity. Avoid placing the speakers in locations subject to direct sunlight, or in smoky or humid places.

Place the unit on a rigid, level surface.

16

Onkyo CR-N7 User Manual

Connecting External Devices

About Connections

Before making any connections, read the manuals supplied with your other components.

Don’t connect the power cord until you’ve completed and double-checked all connections.

Connection Color Coding

RCA-type audio connections are usually color-coded: red and white. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”).

Left (white)

Analog audio

Left (white)

 

Right (red)

 

Right (red)

Cables & Jacks

A connecting cable is not included with this unit.

• Push plugs in all the way to make

 

 

 

 

Right!

 

good connections (loose connec-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tions can cause noise or malfunc-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tions).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• To prevent interference, keep

 

 

 

 

 

Wrong!

 

 

 

 

 

 

 

audio cables away from power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cords and speaker cables.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optical Digital Jacks

The CD receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way.

Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.

Note:

Do not place objects on the unit as they may interfere with proper ventilation.

Cable

Jack

Description

Optical digital

OPTICAL

This cable carries digital audio.

audio cable

 

 

Analog audio

R

L

This cable carries analog audio.

cable (RCA)

 

 

 

Connecting a Subwoofer

The CD receiver has a SUBWOOFER PRE OUT jack. Connect an active subwoofer (a subwoofer that contains an amplifier).

Active subwoofer

CD receiver

(with a built-in amplifier)

 

IN

PRE OUT

OUT

 

 

IN

 

OUT

 

IN

R

L

 

ANTENNA

 

PRE OUT

R L

SPEAKERS

R L

REMOTE

CONTROL

OPTICAL

DIGITAL OUT

: Signal flow

17

Loading...
+ 39 hidden pages