OMNIREL OM7509SC, OM7501SC, OM7505SC, OM7504SC, OM7503SC Datasheet

...
0 (0)
OMNIREL OM7509SC, OM7501SC, OM7505SC, OM7504SC, OM7503SC Datasheet

OM7500SC

DUAL POSITIVE AND NEGATIVE FIXED

VOLTAGE REGULATORS

Dual 5V, 12V and 15V, 1.5 Amp Fixed

Voltage Regulators In Single Hermetic

MO-078AA Package

FEATURES

Positive And Negative Regulators In One Package

Hermetic 5-Pin Metal Package, JEDEC MO-078AA

Isolated Case

Output Voltages 5V, 12V and 15V; Other Voltages Available

Output Voltages Set Internally To ±2.0%

Built-In Thermal Overload Protection

Short Circuit Current Limiting

Product Is Available Screened To MIL-S-19500, TX, TXV And S Levels

DESCRIPTION

This series of products offers a positive and a negative fixed voltage regulator in one hermetically sealed, 5 PIN package whose outline is similar to the industry standard TO-247 package. With heat sinking, they can regulate over 1.5 Amp of output current per device. Standard voltages are + or - 5V, 12V and 15V. Other voltages are available upon request. Output voltages are internally trimmed to ±2.0% of nominal voltage. These devices are ideally suited for Military applications where small size and high reliability are required.

To order, use the following Omnirel part numbers to determine the required output voltage of each regulator within one package.

Omnirel

Output Voltages

PIN CONNECTION

 

3.3

Part Number

Positive

Negative

 

 

 

 

 

 

 

 

 

 

 

OM7501SC

+5V

-5V

 

 

 

 

 

 

 

 

 

 

 

 

OM7502SC

+5V

-12V

 

 

 

 

 

 

 

 

 

 

 

 

OM7503SC

+5V

-15V

1 2 3 4 5

 

OM7504SC

+12V

-5V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OM7505SC

+12V

-12V

 

 

 

 

 

 

 

 

 

 

 

 

OM7506SC

+12V

-15V

 

 

 

 

 

 

 

 

 

 

 

 

OM7507SC

+15V

-5V

 

 

 

 

 

 

 

 

 

 

 

 

Pin 1: + Input

OM7508SC

+15V

-12V

Pin 2: + Output

OM7509SC

+15V

-15V

Pin 3: Common

 

 

 

Pin 4: - Input

 

 

 

 

 

 

Pin 5: - Output

4 11 R4

3.3 - 121

Supersedes 1 07 R3

 

OM7500SC

3.3

INDIVIDUAL POSITIVE REGULATORS

ELECTRICAL CHARACTERISTICS +5 Volt VIN = 10V, Io = 500mA, -55°C

TA 125°C (unless otherwise specified)

 

 

Parameter

Symbol

 

 

Test Conditions

 

 

 

 

Min.

 

 

Max.

 

Unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output Voltage

 

VOUT

 

 

TA = 25°C

 

 

 

 

4.92

 

5.08

 

V

 

 

 

 

 

 

 

 

 

 

VIN = 7.5V to 20V

 

 

4.85

 

5.15

 

V

 

 

Line Regulation

 

VRLINE

 

 

VIN = 7.5V to 20V

 

 

 

 

 

 

5

 

mV

 

 

(Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

12

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIN = 8.0V to 12V

 

 

 

 

 

 

4

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Load Regulation

 

VRLOAD

 

 

IO = 5mA to 1.5 Amp

 

 

 

 

 

 

12

 

mV

 

 

(Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

25

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IO = 250mA to 750 mA

 

 

 

 

 

 

6

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standby Current Drain

 

ISCD

 

 

 

 

 

 

 

 

 

6

 

mA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.5

 

mA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standby Current Drain

 

DISCD

 

 

VIN = 7.5V to 20V

 

 

 

 

0.8

 

mA

 

 

Change With Line

 

(Line)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standby Current Drain

 

DISCD

 

 

IO = 5mA to 1000mA

 

 

 

 

0.5

 

mA

 

 

Change With Load

 

(Load)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dropout Voltage

 

VDO

 

 

TA = 25°C, DVOUT = 100mV, IO = 1.0A

 

 

 

 

 

 

2.5

 

V

 

 

Peak Output Current

 

IO (pk)

 

 

TA = 25°C

 

 

 

 

1.5

 

3.3

 

A

 

 

Short Circuit Current

 

 

IDS

 

 

VIN = 35V

 

 

 

 

 

 

1.2

 

A

 

 

(Note 2)

 

 

 

 

 

 

 

 

 

 

 

 

2.8

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ripple Rejection

 

DVIN

 

 

 

f =120 Hz, DVIN = 10V

 

 

 

 

66

 

 

 

 

dB

 

 

 

 

DVOUT

 

 

(Note 3)

 

 

60

 

 

 

 

dB

 

 

Output Noise Voltage

 

 

NO

 

 

TA = 25°C, f =10 Hz to 100KHz

 

 

 

 

 

 

40

 

µV/V

 

 

(Note 3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Long Term Stability

 

DVOUT

 

 

 

TA = 25°C, t = 1000 hrs.

 

 

 

 

 

 

75

 

mV

 

 

(Note 3)

 

 

 

Dt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELECTRICAL CHARACTERISTICS +12 Volt VIN = 19V, Io = 500mA, -55°C TA

125°C (unless otherwise specified)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

 

Symbol

Test Conditions

 

 

 

 

Min.

 

 

Max.

 

Unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output Voltage

 

 

 

VOUT

TA = 25°C

 

 

 

 

11.88

 

12.12

 

V

 

 

 

 

 

 

 

 

 

 

VIN = 14.5V to 27V

 

 

11.64

 

12.36

 

V

 

 

Line Regulation

 

 

VRLINE

VIN = 14.5V to 27V

 

 

 

 

 

 

18

 

mV

 

 

(Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

50

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIN = 16V to 22V

 

 

 

 

 

 

9

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

 

mV

 

 

Load Regulation

 

VRLOAD

IO = 5mA to 1.5 Amp

 

 

 

 

 

 

32

 

mV

 

 

(Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

60

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IO = 250mA to 750 mA

 

 

 

 

 

 

20

 

mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40

 

mV

 

 

Standby Current Drain

 

 

 

ISCD

 

 

 

 

 

 

 

6.0

 

mA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.5

 

mA

 

 

Standby Current Drain

 

 

 

DISCD

VIN = 15V to 30V

 

 

 

 

0.8

 

mA

 

 

Change With Line

 

 

 

(Line)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standby Current Drain

 

 

 

DISCD

IO = 5mA to 1000mA

 

 

 

 

0.5

 

mA

 

 

Change With Load

 

 

(Load)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dropout Voltage

 

 

 

VDO

DVOUT = 100mV, IO = 1.0A

 

 

 

 

2.5

 

V

 

 

Peak Output Current

 

 

 

IO (pk)

TA = 25°C

 

 

 

 

1.5

 

3.3

 

A

 

 

Short Circuit Current

 

 

 

IDS

VIN = 35V

 

 

 

 

 

 

1.2

 

A

 

 

(Note 2)

 

 

 

 

 

 

 

 

 

 

 

 

2.8

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ripple Rejection

 

 

 

DVIN

 

f =120 Hz, DVIN = 10V

 

 

 

 

61

 

 

 

 

dB

 

 

 

 

 

DVOUT

(Note 3)

 

 

54

 

 

 

 

dB

 

 

Output Noise Voltage

 

 

 

NO

TA = 25°C, f =10 Hz to 100KHz

 

 

 

 

 

 

40

 

µV/V

 

 

(Note 3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Long Term Stability

 

 

DVOUT

 

TA = 25°C, t = 1000 hrs.

 

 

 

 

 

 

120

 

mV

 

 

(Note 3)

 

 

 

Dt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes:

1.Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately.

2.Short Circuit protection is only assured up to VIN = 35V.

3.If not tested, shall be guaranteed to the specified limits.

The • denotes the specifications which apply over the full operating temperature range.

3.3 - 122

Loading...
+ 3 hidden pages