NordicTrack NTL209090 Owner's Manual
ww.nordictrack.com
w
Model No. NTL20909.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
USER'S MANUAL
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HOW TO MOVE THE INCLINE TRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the warning decals.
If a decal is missing or illegible, call the telephone
number on the front cover of this manual and request a free replacement decal. Apply the decal in
the location shown. Note: The decals may not be
shown at actual size.
NordicTrack is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your incline trainer before using your incline trainer.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning this or any exercise program, consult your physician. This is especially important for persons over age 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of this incline trainer are adequately informed of all warnings and precautions.
3. Use the incline trainer only as described.
4. Place the incline trainer on a level surface,
with at least 8 ft. (2.4 m) of clearance behind
it and 2 ft. (0.6 m) on each side. Do not place
the incline trainer on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the incline
trainer.
5. Keep the incline trainer indoors, away from
moisture and dust. Do not put the incline
trainer in a garage or covered patio, or near
water.
6. Do not operate the incline trainer where
aerosol products are used or where oxygen
is being administered.
trainer with bare feet, wearing only stockings,
or in sandals.
11. When connecting the power cord (see page
13), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of
carrying 15 or more amps. No other appliance
should be on the same circuit. Do not use an
extension cord.
12. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 13. To purchase a surge suppressor, see
your local NordicTrack dealer or call the telephone number on the front cover of this manual and order part number 146148, or see your
local electronics store.
13. Failure to use a properly functioning surge
suppressor could result in damage to the control system of the incline trainer. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
14. Keep the power cord and the surge suppressor away from heated surfaces.
7. Keep children under age 12 and pets away
from the incline trainer at all times.
8. The incline trainer should be used only by
persons weighing 350 lbs. (159 kg) or less.
9. Never allow more than one person on the incline trainer at a time.
10. Wear appropriate exercise clothes when
using the incline trainer. Do not wear loose
clothes that could become caught in the incline trainer. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the incline
15. Never move the walking belt while the power
is turned off. Do not operate the incline
trainer if the power cord or plug is damaged,
or if the incline trainer is not working properly. (See TROUBLESHOOTING on page 22 if
the incline trainer is not working properly.)
16. Read, understand, and test the emergency
stop procedure before using the incline
trainer (see HOW TO TURN ON THE POWER
on page 15).
17. Never start the incline trainer while you are
standing on the walking belt. Always hold the
handrails while using the incline trainer.
3
8. The incline trainer is capable of high speeds.
1
Adjust the speed in small increments to
avoid sudden jumps in speed.
9. The pulse sensor is not a medical device.
1
Various factors, including the user's move-
ent, may affect the accuracy of heart rate
m
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
20. Never leave the incline trainer unattended
while it is running. Always remove the key,
unplug the power cord, and switch the
reset/off circuit breaker to the “off” position
when the incline trainer is not in use. (See the
drawing on page 5 for the location of the
reset/off circuit breaker.)
21. Do not attempt to move the incline trainer until
it is properly assembled. (See ASSEMBLY on
page 6, and HOW TO MOVE THE INCLINE
TRAINER on page 12.) You must be able to
safely lift 45 lbs. (20 kg) to move the incline
trainer.
3. Inspect and properly tighten all parts of the
2
incline trainer regularly.
24. Never insert or drop any object into any
pening on the incline trainer.
o
DANGER: A
5.
2
cord immediately after use, before cleaning
the incline trainer, and before performing the
maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
26. The incline trainer is intended for in-home use
only. Do not use the incline trainer in any
commercial, rental, or institutional setting.
27. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
lways unplug the power
22. Do not change the incline of the incline
trainer by placing objects under the incline
trainer.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary NordicTrack
INCLINE TRAINER X7i. The INCLINE TRAINER X7i
offers a selection of features designed to make your
workouts at home more enjoyable and effective.
For your benefit, read this manual carefully before
using the incline trainer. If you have questions after
reading this manual, please see the front cover of this
Pulse Sensor
Accessory Tray
Handrail
®
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Key/Clip
Console
Fan
Walking Belt
Walking Platform
Idler Roller
Adjustment Bolts
Wheel
Platform Cushion
Reset/Off
Circuit Breaker
Power Cord
5
ASSEMBLY
#8 x 3/4"
Screw (1)–14
#8 x 1" Tek
Screw (2)–4
3/8" Nut (7)–2
3/8" Star
Washer (8)–8
5/16" Star
Washer (9)–8
Base Foot Spacer
(11)–4
3/8" x 3 1/2" Patch Bolt (5)–4
3/8" x 2 1/2" Bolt (6)–2
5/16" x 2 3/4" Bolt (4)–4
3/8" x 5" Patch Bolt (34)–4
5/16" x 1 3/8"
Bolt (3)–4
#8 x 1 1/2"
Screw (104)–2
ssembly requires two persons. Set the incline trainer in a cleared area and remove all packing materials. Do
A
not dispose of the packing materials until assembly is completed. Note: The underside of the incline trainer
walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the
top of the walking belt or the shipping carton. This is normal and does not affect incline trainer performance. If
there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive
cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver ,
adjustable wrench , and scissors .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included.
6
1. Make sure that the power cord is unplugged.
1
With the help of a second person, tip the incline
rainer onto its left side. Have the second per-
t
son hold the incline trainer to prevent it from
ipping.
t
Attach four Base Feet (10) and four Base Foot
Spacers (11) to the Base (80) with four #8 x 1"
Tek Screws (2) in the locations shown. Be care-
ful not to overtighten the Tek Screws.
11
11
10
10
11
10
2
2
11
10
2
80
2
2. Identify the Right Upright (79), which is marked
with a “Right” sticker. Hold the Right Upright
near the incline trainer.
See the lower inset drawing. Tie the wire tie in
the Right Upright (79) around the end of the
Upright Wire (78). See the upper inset draw-
ing. Then, pull the other end of the wire tie until
the Upright Wire is routed out the side hole in
the top of the Right Upright.
Orient the Right Upright (79) as shown. Attach
the Right Upright to the Base (80) with two 3/8"
x 3 1/2" Patch Bolts (5) and two 3/8" Star
Washers (8). Start both Patch Bolts before
tightening either of them. Be careful not to
pinch the Upright Wire (78).
With the help of a second person, tip the incline
trainer onto its right side. Have the second per-
son hold the incline trainer to prevent it from
tipping.
Attach the Left Upright (not shown) as described above. Note: There are no wires on the
left side.
2
78
Wire
Tie
79
79
Wire
Tie
80
78
8
5
79
Wire
78
Tie
7
3. With the help of a second person, carefully tip
the incline trainer down so that the Base (80) is
flat on the floor.
Attach a Wheel (12) to each side of the Base
80) with a 3/8" x 2 1/2" Bolt (6) and a 3/8" Nut
(
(7) (only one side is shown).
3
7
12
6
80
4. Set the Console Cover (87) face down on a soft
surface. Remove the two #8 x 1 1/2" Screws
(104) from the Console Back (89). Save the
Screws for step 6. Separate the Console Back
from the Console Cover, and remove the
Console Crossbar (not shown) from inside.
5. Position the Console Crossbar (103) between
the Uprights (77, 79) as shown. Attach the
Console Crossbar to the Uprights with four 5/16"
x 2 3/4" Bolts (4) and four 5/16" Star Washers
(9). Do not fully tighten the Bolts yet.
Remove wire the tie from the Upright Wire (78).
4
89
104
87
5
4
9
103
77
Wire Tie
78
79
4
9
8
6. Set the Console Cover (87) on the Uprights (77,
79). Make sure that the Console Cover is oriented with the ties toward the bottom as shown.
Attach the Console Cover (87) with the two #8 x
1/2" Screws (104) that you removed in step 4.
1
Start both Screws before tightening either of
them. Do not overtighten the Screws.
6
87
Insert the Upright Wire (78) through the loops in
the ties.
7. Identify the Left and Right Pulse Handrails (86,
102).
Hold the Left Pulse Handrail (86) near a
Handrail (88). Insert the Left Pulse Wire (90)
into the top of the Handrail and pull it out of the
indicated hole. Slide the Left Pulse Handrail into
the Handrail. Be careful not to pinch the Left
Pulse Wire.
Attach the Left Pulse Handrail (86) to the
Handrail (88) with two 5/16" x 1 3/8" Bolts (3)
and two 5/16" Star Washers (9). Note: See the
inset drawing. Use the two indicated bolt
holes.
Attach the Right Pulse Handrail (102) to the
other Handrail (88) in the same way.
Ties
78
79
7
86
Bolt
Holes
90
88
88
104
77
86
102
Hole
3
Hole
9
90
88
91
3
9
9
8. Have a second person hold the Left Pulse
Handrail (86) near the Left Upright (77). Insert
the Left Pulse Wire (90) from the Left Pulse
andrail through the hole in the Left Upright and
H
pull it out of the hole in the side of the Left
pright. Then, insert the Left Pulse Wire through
U
the loops in the ties.
8
102
86
Attach the Left Pulse Handrail (86) to the Left
Upright (77) with two 3/8" x 5" Patch Bolts (34)
and two 3/8" Star Washers (8). Start all four
Patch Bolts before firmly tightening any of
them.
Attach the Right Pulse Handrail (102) to the
Right Upright (79) as described above.
9. Have a second person hold the Console (85)
near the Console Cover (87). Insert the wires
from the Console through the indicated hole.
Connect the Upright Wire (78), the Left and
Right Pulse Wires (90, 91), and the Console
Ground Wire (97) to the wires extending from
the Console (85). See the inset drawing. The
connectors should slide together easily and
snap into place. If they do not, turn one con-
nector and try again. IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
8
Ties
90
34
8
77
87
90
79
97
91
91
85
Hole
78
Ties
34
9
Hole
Console Wire
78
Wires
10
Loading...