NordicTrack ELITE NTL19806.0 User Manual

Loading...

Model No. NTL19806.0

Serial No.

Write the serial number in the space above for reference.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.

CALL TOLL-FREE:

1-888-825-2588

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB: www.nordictrackservice.com

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

USER'S MANUAL

Visit our website at www.nordictrack.com

new products, prizes, fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 HOW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual.

NordicTrack is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.

1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2.Use the treadmill only as described.

3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

4.Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.

5.Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

6.Keep children under the age of 12 and pets away from the treadmill at all times.

7.The treadmill should not be used by persons weighing more than 350 pounds.

8.Never allow more than one person on the treadmill at a time.

9.Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

10.When connecting the power cord (see page 13), plug the power cord into a surge suppressor (not included). Plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.

11.Use only a single-outlet surge suppressor that meets all of the specifications described on page 13. To purchase a surge suppressor, see your local NordicTrack dealer or call the tollfree telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.

12.Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.

13.Keep the power cord and the surge suppressor away from heated surfaces.

14.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 26 if the treadmill is not working properly.)

15.Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 15).

16.Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill.

17.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

18.The pulse sensors are not medical devices. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general.

19.Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off circuit breaker to the “off” position when the treadmill is not in use. (See the drawing on page 6 for the location of the reset/off circuit breaker.)

20.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 7, and HOW TO FOLD AND MOVE THE TREADMILL on page 25.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

3

21.Do not change the incline of the treadmill by placing objects under the treadmill.

22.When folding or moving the treadmill, make sure that the frame is held securely by the pin on the latch knob.

23.Inspect and properly tighten all parts of the treadmill regularly.

24.Never insert or drop any object into any opening.

25.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

26.The treadmill is intended for in-home use only. Do not use the treadmill in any commercial, rental, or institutional setting.

27.If an outside antenna or cable system is connected, be sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

28.An outside antenna system should not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

29.To reduce the risk of electric shock, do not remove the cover or the back of the television. There are no user serviceable parts inside. Refer servicing to qualified service personnel.

30.Upon completion of any service or repairs to the treadmill or the television, ask the service technician to perform safety checks to confirm that the unit is in proper operating condition.

Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2) aluminum, No. 17 AWG (1.0mm2) copper-clad steel or bronze wire, or larger as a ground wire.

Secure an antenna lead-in and ground wires to the house with stand-off insulators spaced from 4 to 6 feet (1.22 to 1.83m) apart.

Mount an antenna discharge unit as close as possible to where the lead-in enters the house.

Use a jumper wire not smaller than No. 6 AWG (13.3mm2) copper, or the equivalent when a separate antenna-grounding electrode is used. See NEC Section 810-21 (j).

Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

4

Power Lines

 

Ground

 

 

 

Standoff

 

 

Clamp

 

 

Insulators

 

 

 

Service

 

 

 

Entrance

 

To External Antenna

Mast

Conductors

 

 

Terminal of Treadmill

 

 

 

Antenna

 

 

 

Service

 

 

Lead-in Wire

 

 

 

Entrance

 

Ground

Antenna

Equipment

 

Wire

Discharge Unit

Power Service Grounding

 

 

Ground Wire

Ground

 

Ground

Electrode System (e.g.

Bonding

Interior Metal Water Pipe)

Clamps

Jumper

Clamps

Optional Antenna Grounding Electrode Driven 8

Feet (2.44m) Into The Earth (If Required By Local

Codes). See NEC Section 810–21 (f).

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the treadmill. If a decal is missing or illegible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. Note: The decals may not be shown at actual size.

5

BEFORE YOU BEGIN

Thank you for selecting the revolutionary NordicTrack® ELITE 4200 treadmill. The ELITE 4200 treadmill offers a selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique ELITE 4200 treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number of the treadmill is NTL19806.0. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).

Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.

 

Fan

Personal Television/Console

Book Holder

 

Accessory Tray

 

Handrail

 

Pulse Sensor

Key/Clip

 

 

Reset/Off

 

Circuit Breaker

Walking Belt

 

Foot Rail

Power Cord

 

 

Adjustable Cushioned

 

Walking Platform

Rear Roller

 

Adjustment Bolts

 

 

6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver . For help identifying the assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 30 and 31. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. To avoid damaging plastic parts, do not use power tools for assembly.

 

3/4” Screw (4)–4

 

Star Washer

 

(90)–10

Handrail Bolt (64)–6

Upright Bolt (72)–4

1. Make sure that the power cord is unplugged.

1

 

With the help of a second person, raise the front

 

of the treadmill and insert the crossbar on the

 

Base (83) into the cutout in the cardboard stand

 

as shown. Have the second person hold the

 

treadmill to prevent it from moving forward

 

or backward until assembly step 2 is com-

 

pleted.

 

WARNING: Serious injury

 

may occur if the treadmill moves for-

 

ward or backward and falls off the card-

 

board stand. A second person must

 

hold the treadmill until assembly step 2

 

is completed to prevent the treadmill

83

from moving, tipping, or falling.

Cardboard

 

 

Stand

 

7

2. Identify the Left Upright (73) and the Right

2

97

 

Upright (74). Hold the Right Upright near the

 

 

 

Right Base Cover (77) as shown. Insert the

 

49

 

Upright Wire Harness (75) up through the rec-

 

 

 

 

 

tangular hole in the bottom of the Right Upright

 

 

 

and out of the top of the Right Upright.

 

 

 

Gently pull up on the Upright Wire Harness (75)

 

75

 

as you set the Right Upright (74) on the Base

 

 

 

73

 

(83) inside the Right Base Cover (77). Be care-

 

 

 

ful not to pinch the Upright Wire Harness.

 

 

 

Attach the Right Upright (74) to the Base (83)

 

 

74

 

76

 

with two Upright Bolts (72) and two Star

 

 

 

 

 

Washers (90). Note: It may be necessary to tip

 

 

 

the tops of the Uprights forward slightly as you

 

 

77

thread the Upright Bolts (72) into the Uprights.

 

 

 

Hold Left Upright (73) near the Left Base Cover

 

 

83

 

 

 

(76), and insert the TV Cable (49) and the AV

 

 

 

Cable (97) up through the rectangular hole in the

 

 

 

bottom of the Left Upright and out of the top of

 

 

90

the Left Upright. Attach the Left Upright to the

 

 

 

 

 

Base (83) with two Upright Bolts and two Star

 

 

72

Washers (not shown).

 

 

 

With the help of a second person, lower the

 

 

 

treadmill off the cardboard stand.

 

 

 

3. Identify the Right Upright Sleeve (96) and the

3

 

 

Left Upright Sleeve (95). Slide the Right Upright

 

 

 

 

 

Sleeve onto the Right Upright (74), and slide the

 

 

 

Left Upright Sleeve onto the Left Upright (73).

 

95

 

 

 

 

 

 

73

 

 

 

“Left”

“Right”

 

 

 

 

 

 

96

 

 

 

74

8

NordicTrack ELITE NTL19806.0 User Manual

4. With the help of a second person, hold the con-

4

Console

 

sole assembly near the Uprights (73, 74).

 

 

 

Assembly

 

Connect the Upright Wire Harness (75) to the

 

 

 

Console Wire Harness (71). Make sure to con-

 

 

 

nect the connectors properly (see the inset

 

 

 

drawing). The connectors should slide to-

 

 

 

gether easily and snap into place. If they do

 

 

73

not, turn one connector and try again. IF THE

 

 

 

 

 

CONNECTORS ARE NOT CONNECTED

 

 

 

PROPERLY, THE CONSOLE MAY BE DAM-

 

 

 

AGED WHEN THE POWER IS TURNED ON.

 

 

71

 

 

 

75

 

 

75

74

 

 

 

5. Connect the TV Cable (49) and the AV Wire (97)

5

 

 

to the cables extending from the console assem-

 

 

 

 

 

bly. Then, insert the connectors down into the

 

99

 

Uprights (73, 74).

 

 

 

 

 

Next, insert the brackets on the Handrails (99)

 

 

49

into the Right Upright (74) and the Left Upright

 

97

(73). Make sure that no wires are pinched.

 

 

 

 

 

 

 

73

99

 

 

 

74

6. Finger tighten three Handrail Bolts (64) with

6

 

 

three Star Washers (90) into the Right Upright

 

 

 

 

 

(74). Next, finger tighten three Handrail Bolts

 

 

 

with three Star Washers (not shown) into the

 

 

 

Left Upright (73). Then, firmly tighten the six

 

73

 

Handrail Bolts.

 

 

 

 

 

 

64

 

 

 

90

 

 

 

74

 

 

 

90

 

 

 

64

 

9

 

 

7. Slide the Right Upright Sleeve (96) up against

7

 

the console assembly. Attach the Right Upright

 

 

 

Sleeve with two 3/4” Screws (4).

 

 

Attach the Left Upright Sleeve (not shown) to the

 

 

Left Upright (73) as described above.

73

 

 

 

4

 

 

96

 

4

74

 

 

8. Note the location of the 75 ohm antenna terminal

8

and the audio/video input jack on the treadmill.

 

For the television to operate, the included

Audio/

Audio/Video Wire Harness (115) and your DVD

Video

player or VCR must be connected to the

Input

audio/video input jack on the treadmill, a personal

 

audio/video player must be connected to the

 

audio/video jack on the console, or an antenna, a

75 Ohm

CATV cable, or a VCR must be connected to the

75 ohm antenna terminal (see page 11).

Antenna

 

Terminal

 

115

9.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or carpet from damage, place a mat under the treadmill.

10

Before operating the television, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill; a VCR or DVD player to the three audio/video RCA jacks; or a personal audio/video player to the audio/video jack below the television on the console. Note: No antenna, cable, or adapter is included.

HOW TO CONNECT AN ANTENNA

300 Ohm Flat Wire

Indoor Antenna

1. Place a VHF

 

antenna in the

Screwdriver

desired loca-

VHF 300

tion. Connect

Ohm Flat

the 300 ohm

Wire

flat wire from

 

the antenna to

 

a 300 ohm to

 

75 ohm

 

adapter.

300 to 75 Ohm Adapter

 

2.Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord.

Outdoor Antenna

VHF

Antenna

300 to 75 Ohm Adapter

75 Ohm

Terminal

Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the lead-in wiring before connecting the antenna.

Combination

 

VHF/UHF Antennas

 

300 Ohm

 

Flat Wire

 

75 Ohm

75 Ohm

Terminal

CATV Cable

300 to 75

 

Ohm Adapter

 

75 Ohm CATV Cable

1.See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.

2.Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

1.See the drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the power cord.

HOW TO CONNECT A 75 OHM CATV CABLE

1. Connect a 75 ohm

 

 

 

 

 

 

 

 

 

 

 

CATV cable to the 75

 

 

75 Ohm CATV Cable

 

 

ohm antenna terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on the treadmill frame

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

near the power cord.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75 Ohm Terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HOW TO CONNECT A VCR

1.Connect one end of a 75 ohm CATV cable to the video output jack on your VCR.

2.Plug in the power cord of your VCR. See your VCR user’s manual for proper grounding instructions.

3.Connect the 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord.

HOW TO CONNECT A DVD PLAYER OR VCR

Plug the three-pronged end of the included audio/video wire harness into your DVD player or VCR, and plug the other end into the audio/video input jack on the treadmill frame near the power cord.

HOW TO CONNECT A PERSONAL AUDIO/VIDEO PLAYER DIRECTLY TO THE CONSOLE

Locate the audio/video jack below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal audio/video player.

11

+ 23 hidden pages