Nilfisk IVB 7-M, IVB 5-M, IVB 3-M User Manual

0 (0)

IVB 3-M/5-M/7-M

auto

Operating Instructions	Driftsvejledning	Kezelési utasítás
Betriebsanleitung	Käyttöohje	Руководство по эксплуатации
Notice d’utilisation	Navodilo za uporabo	Instrucciones de manejo
Gebruiksaanwijzing	Uputstvo za rad	Instruções de operação
Istruzioni sull’uso	Prevádzkový návod	Οδηγίες λειτουργίας
Driftsinstruks	Provozní návod	Ýþletme kýlavuzu
Bruksanvisning	Instrukcja obsługi

302001885 C

Nilfisk IVB 7-M, IVB 5-M, IVB 3-M User Manual

IVB 3-M IVB 5-M IVB 7-M

11 14 9

auto

IVB 3-M

5
6	IVB 5-M
	IVB 5-M
	10

auto

1 8

IVB 7-M

auto	auto
auto
	4

auto

12 8

Contents

1	Important safety
	instructions		............................................................................................	2
2	Description	2.1	Purpose................................................................................	4
		2.2	Operating elements ..............................................................	5
3	Before start-up	3.1	Assembling the cleaner ........................................................	5
4	Operation	4.1	Connections .........................................................................	5
		4.1.1	Connecting the suction hose ................................................	5
		4.1.2	Electrical connection ............................................................	5
		4.1.3	Connecting electrical appliances..........................................	6
		4.2	Switching on the vacuum cleaner.........................................	6
		4.2.1	Switch position “I” .................................................................	6
		4.2.2	Switch position „auto“ ...........................................................	6
		4.2.3	Suction power control...........................................................	6
		4.3	Check volume flow monitor ..................................................	6
		4.4	Acoustic warning ..................................................................	7
		4.5	Cleaning the filter element (IVB 3-M) ...................................	7
		4.6	Cleaning the filter element (IVB 5-M/7-M) ............................	7
5	Applications and	5.1	Techniques ...........................................................................	8
	techniques	5.1.1	Picking up dry substances....................................................	8
		5.1.2	Picking up liquids..................................................................	9
6	After finishing work	6.1	Switching the vacuum cleaner off and storage.....................	9
7	Maintenance	7.1	Maintenance plan...............................................................	10
		7.2	Maintenance work ..............................................................	10
		7.2.1	Replacing the waste bag ....................................................	10
		7.2.2	Replacing the filter bag.......................................................	11
		7.2.3	Emptying dirt tank (IVB 3-M/5-M).......................................	11
		7.2.4	Emptying the dirt tank (IVB 7-M).....................................	11
		7.2.5	Replacing filter element (IVB 3-M) .....................................	12
		7.2.6	Replacing filter element (IVB 5-M/7-M) ..............................	12
8	Troubleshooting		..........................................................................................	13
9	Further information	9.1	Recycling the vacuum cleaner ...........................................	14
		9.2	Guarantee ..........................................................................	14
		9.3	Tests and approvals............................................................	14
		9.4	Technical data ....................................................................	15
		9.5	Accessories........................................................................	15
		9.6	EC declaration of conformity ..............................................	15

IVB 3-M IVB 5-M IVB 7-M

english

1) Option depending on model

IVB 3-M

IVB 5-M

IVB 7-M

english 1 Important safety instructions

Symbols used to mark		Before using the
instructions		vacuum cleaner,
		always		read
		the	operating
		instructions			and
		keep them read-
	ily available.
		This	symbol		is
		used	to	mark
		safety	instruc-
		tions	that	must
		be observed			to
	prevent damage to persons.
For your own safety	Only allow the vacuum cleaner
	to be used by persons who have
	been trained in its use and who
	have been explicitly authorized
	to use it.

Despite its simple handling the vacuum cleaner is not suitable for children.

This symbol is used to mark safety instructions that must be observed to prevent damage

to the vacuum cleaner and its performance.

This symbol indicates tips and instructions to

simplify work and to ensure safe operation.

The use of the vacuum cleaner is subject to valid national regulations. Besides the operating instructions and the binding accident prevention regulations valid in the country of use, observe recognized regulations for safety and proper use.

Do not use any unsafe work techniques.

Transport	Before transporting the dirt	Do use a crane hook to lift the
	tank, close all the locks.	cleaner.
	Do not tilt the cleaner if there is
	liquid in the dirt tank.

Purpose and intended use	The vacuum cleaners described
	in this operating manual are
	suitable for
	–	commercial		use,	e.g.	in
		hotels,	schools,		hospitals,
		factories, shops, offices and
		rental businesses.
	– for separation of dust with an
		exposure limit of greater than
		0,1 mg/m³, (dust class M).
	The following			materials should
	not be picked up by the vacuum
	cleaner:
	–	hot materials (burning ciga-
		rettes, hot ash, etc.)
	– flammable,			explosive,		ag-
		gressive	liquids (e.g. petrol,

solvents, acids, alkalis, etc.)

–flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)

When dust removers are used, the rate at which air is exchanged in the room must be adequate if the exhaust air from the vacuum cleaner is blown into the room (please observe regulations valid in your country).

Before starting work, the operating staff must be informed on

–use of the vacuum cleaner

–risks associated with the material to be picked up

–safe disposal of the picked up material.

02	1) Option depending on model

Precautions and safety regulations when using the vacuum cleaner

Dust Class M (medium).

tested in its entirety by vacuums

The dusts which belong

for this dust class. The maximum

to this class are: dusts

degree of permeability is 0.1%

with OEL values > 0.1 mg/m³ as

and the disposal must be low

well as saw dust. The machine is

dust.

Before start-up

Electrical components

Inspect power cord regularly to detect signs of damage, e.g. cracks or ageing.

If the power cord is damaged, it must be replaced by Nilfisk Advance Service or an electrician to avoid danger before use of the vacuum cleaner is continued.

Use only the type of power cord specified in the operating manual.

Do not damage the power cord (e.g. by moving over it or pulling or crushing it).

Disconnect the power cord by pulling the plug only (do not pull or tug the power cord).

Inspect the vacuum cleaners to ensure that they are in proper condition. Plugs and couplings in power cords must at least have splash protection.

Never use the vacuum cleaner if the filter element is damaged.

Picking up liquids

If foam develops or liquid emerges, stop work immediately and empty the dirt tank.

Regularly clean the built in float (IVB 3-M) and level indicator hose (IVB 5-M/7-M) to limit the water level and check that they are not damaged.

See section 5 for information on handling liquids and (hazardous) dust.

Check the rated voltage of the vacuum cleaner before connecting it to the mains supply system. Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply.

If you are using an extension cord, use only those specified by the manufacturer or higher quality ones (see section 9.4 „Technical data“).

It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker. This stops the supply of electricity if the leakage current to earth exceeds 30 mA for 30 ms or it has an earth tester circuit.

When using an extension lead, check the minimum cross-sec- tions of the cable:

Cable length	Cross section
m
m	<16 A	<25 A
	<16 A	<25 A

up to 20 m	ø1.5mm²	ø2.5mm²

20 to 50 m	ø2.5mm²	ø4.0mm²

Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is maintained.

Never spray water on to the upper section of the vacuum cleaner. Danger for persons, risk or short-circuiting.

Observe the latest edition of the IEC regulations.

IVB 3-M IVB 5-M IVB 7-M

english

1) Option depending on model

IVB 3-M

IVB 5-M

IVB 7-M

english Tool socket

Use the socket on the vacuum cleaner for the purpose defined in the operating instructions only.

Before plugging an appliance into the appliance socket:

1.Switch off the vacuum cleaner

2.Switch off the appliance to

be connected.

CAUTION!

Follow the operating instructions and safety instructions for appliances connected to the power tool socket.

Maintenance, cleaning and re-	Only carry		out maintenance
pair	work described in the operating
	instructions.
	Always pull out the mains plug
	before cleaning and mainte-
	nance of the vacuum cleaner.
	During maintenance and clean-
	ing, handle the vacuum cleaner
	in such a manner that there is no
	danger for maintenance staff or
	other persons.
	In the maintenance area
	– use filtered compulsory ven-
		tilation
	–	wear protective clothing
	–	clean the	maintenance are
		so that no harmful substanc-
		es get into the surroundings.

Before removing the vacuum cleaner from the area contaminated with harmful substances:

– clean the outside of the vac-

uum cleaner, wipe it clean or pack the vacuum cleaner in well sealed packaging

–and avoid spreading deposited harmful dust.

During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be:

–packed in well sealed bags

–disposed of in a manner that complies with valid regulations for such waste removal.

A dust test must be performed at least once every year by Nilfisk Advance service or a trained person. This test includes, for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air and the control equipment works properly.

Accessories and spare parts	Use	only the brushes supplied
	with	the vacuum cleaner or

specified in the operating manual. The use of other brushes can adversely affect safety.

Use only original Nilfisk Advance accessories and spare parts (see section 9.5). The use of other parts can adversely affect safety.

2 Description

2.1 Purpose	This cleaner is suitable to pick
	up dry, nonflammable dust, liq-
	uids, sawdust and hazardous
	dusts with maximum room con-
	centration values ≥ 0.1 mg/m3
	(dust class M).

Depending on how hazardous the dust is, the cleaner must be fitted with appropriate filters. See table in section 5.1.1.

04	1) Option depending on model

+ 12 hidden pages