Nilfisk ATTIX 761-2MXC, ATTIX 360-2M, ATTIX 560-2MXC, ATTIX 550-2M, ATTIX 751-2M User Manual

0 (0)

ATTIX 360-2M

ATTIX 550-2M

ATTIX 560-2MXC

ATTIX 751-2M

ATTIX 761-2MXC

english

Operating Instructions................................

1-15

deutsch

Betriebsanleitung......................................

16-30

français

Notice d’utilisation ....................................

31-45

nederlands Gebruiksaanwijzing ..................................

46-60

italiano

Istruzioni sull’uso......................................

61-75

norsk

Driftsinstruks.............................................

76-90

svensk

Bruksanvisning .......................................

91-105

dansk

Driftsvejledning .....................................

106-120

suomi

Käyttöohje..............................................

121-135

slovensći

Navodilo za uporabo ..............................

136-150

hrvatski

Uputstvo za rad .......................................

151-165

slovenský

Prevádzkový návod .................................

166-180

český

Provozní návod........................................

181-195

polski

Instrukcja obsługi....................................

196-210

magyar

Kezelési utasítás .....................................

211-225

русский

Руководство по эксплуатации ...............

226-240

español

Instrucciones de manejo ......................

241-255

português

Instruções de operação........................

256-270

ελληνικά

Οδηγίες λειτουργίας..............................

271-285

türkçe

Ýþletme kýlavuzu.....................................

286-300

302001674 - 2005-01-14

Nilfisk ATTIX 761-2MXC, ATTIX 360-2M, ATTIX 560-2MXC, ATTIX 550-2M, ATTIX 751-2M User Manual

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC

ATTIX 751-2M / ATTIX 761-2MXC

 

ATTIX 3

 

3

10

 

 

 

11

1

 

3

 

14

 

9

auto

 

 

4

 

 

5

 

8

6

 

 

 

 

 

10

 

7

 

 

14

 

 

9

auto auto

 

1

8

 

ATTIX 7

2

 

 

10

 

 

14

 

3

 

 

9

auto auto

 

 

 

4

 

 

5

8

 

12

 

 

 

 

5

 

 

6

ATTIX 5

1

2

3

4

5

6

7

12

13

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC

ATTIX 751-2M / ATTIX 761-2MXC

Contents english

1

Important safety

 

 

 

 

instructions

 

............................................................................................

2

2

Description

2.1

Purpose................................................................................

4

 

 

2.2

Operating elements ..............................................................

5

3

Before start-up

3.1

Assembling the cleaner ........................................................

5

4

Operation

4.1

Connections .........................................................................

5

 

 

4.1.1

Connecting the suction hose ................................................

5

 

 

4.1.2

Electrical connection ............................................................

5

 

 

4.1.3

Connecting electrical appliances..........................................

6

 

 

4.2

Switching on the vacuum cleaner.........................................

6

 

 

4.2.1

Switch position “I” .................................................................

6

 

 

4.2.2

Switch position „auto“ ...........................................................

6

 

 

4.2.3

Suction power control...........................................................

6

 

 

4.3

Check volume flow monitor ..................................................

6

 

 

4.4

Acoustic warning ..................................................................

7

 

 

4.5

Cleaning the filter element (ATTIX 360-2M) .........................

7

 

 

4.6

Cleaning the filter element (ATTIX 560-2MXC/761-2MXC) ..7

5

Applications and

5.1

Techniques ...........................................................................

8

 

techniques

5.1.1

Picking up dry substances ...................................................

8

 

 

5.1.2

Picking up liquids..................................................................

9

6

After finishing work

6.1

Switching the vacuum cleaner off and storage.....................

9

7

Maintenance

7.1

Maintenance plan ...............................................................

10

 

 

7.2

Maintenance work ..............................................................

10

 

 

7.2.1

Replacing the waste bag ....................................................

10

 

 

7.2.2

Replacing the filter bag.......................................................

11

 

 

7.2.3

Emptying dirt tank (ATTIX 3+5) ..........................................

11

 

 

7.2.4

Emptying the dirt tank (ATTIX 7).....................................

11

 

 

7.2.5

Replacing filter element (ATTIX 360-2M/550-2M/751-2M) .12

 

 

7.2.6

Replacing filter element (ATTIX 560-2MXC/761-2MXC) ....

12

8

Troubleshooting

 

..........................................................................................

13

9

Further information

9.1

Recycling the vacuum cleaner ...........................................

14

 

 

9.2

Guarantee ..........................................................................

14

 

 

9.3

Tests and approvals ...........................................................

14

 

 

9.4

Technical data ....................................................................

15

 

 

9.5

Accessories........................................................................

15

 

 

9.6

EC declaration of conformity ..............................................

15

1) Option depending on model

1

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC

ATTIX 751-2M / ATTIX 761-2MXC

english 1 Important safety instructions

Symbols used to mark

 

 

Before using the

instructions

 

 

vacuum cleaner,

 

 

 

always

read

 

 

 

the

operating

 

 

 

instructions

 

and

 

 

 

keep them read-

 

ily available.

 

 

 

 

 

 

This

symbol

is

 

 

 

used

to

mark

 

 

 

safety

instruc-

 

 

 

tions

that

must

 

 

 

be observed

to

 

prevent damage to persons.

 

For your own safety

Only allow the vacuum cleaner

 

to be used by persons who have

 

been trained in its use and who

 

have been explicitly authorized

 

to use it.

 

 

 

Despite its simple handling the vacuum cleaner is not suitable for children.

This symbol is used to mark safety instructions that must be observed to prevent damage

to the vacuum cleaner and its performance.

This symbol indicates tips and instructions to

simplify work and to ensure safe operation.

The use of the vacuum cleaner is subject to valid national regulations. Besides the operating instructions and the binding accident prevention regulations valid in the country of use, observe recognized regulations for safety and proper use.

Do not use any unsafe work techniques.

Transport

Before transporting the dirt

 

tank, close all the locks.

 

Do not tilt the cleaner if there is

 

liquid in the dirt tank.

Do use a crane hook to lift the cleaner.

Purpose and intended use

The vacuum cleaners described

 

in this operating manual are

 

suitable for

 

 

 

 

 

commercial

use,

e.g.

in

 

 

hotels,

schools,

hospitals,

 

 

factories, shops, offices and

 

 

rental businesses.

 

 

 

– for separation of dust with an

 

 

exposure limit of greater than

 

 

0,1 mg/m³, (dust class M).

 

The following

materials should

 

not be picked up by the vacuum

 

cleaner:

 

 

 

 

 

hot materials (burning ciga-

 

 

rettes, hot ash, etc.)

 

 

– flammable,

explosive,

ag-

 

 

gressive

liquids (e.g. petrol,

solvents, acids, alkalis, etc.)

flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)

When dust removers are used, the rate at which air is exchanged in the room must be adequate if the exhaust air from the vacuum cleaner is blown into the room (please observe regulations valid in your country).

Before starting work, the operating staff must be informed on

use of the vacuum cleaner

risks associated with the material to be picked up

safe disposal of the picked up material.

2

1) Option depending on model

Precautions and safety regulations when using the vacuum cleaner

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC

ATTIX 751-2M / ATTIX 761-2MXC

Before start-up

Electrical components

english

Inspect power cord regularly to detect signs of damage, e.g. cracks or ageing.

If the power cord is damaged, it must be replaced by Nilfisk- Alto-Service or an electrician to avoid danger before use of the vacuum cleaner is continued.

Use only the type of power cord specified in the operating manual.

Do not damage the power cord (e.g. by moving over it or pulling or crushing it).

Disconnect the power cord by pulling the plug only (do not pull or tug the power cord).

Inspect the vacuum cleaners to ensure that they are in proper condition. Plugs and couplings in power cords must at least have splash protection.

Never use the vacuum cleaner if the filter element is damaged.

Picking up liquids

If foam develops or liquid emerges, stop work immediately and empty the dirt tank.

Regularly clean the built in float (ATTIX 360-2M/550-2M/751- 2M) and level indicator hose (ATTIX 560-2MXC/761-2MXC) to limit the water level and check that they are not damaged.

See section 5 for information on handling liquids and (hazardous) dust.

Check the rated voltage of the vacuum cleaner before connecting it to the mains supply system. Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply.

If you are using an extension cord, use only those specified by the manufacturer or higher quality ones (see section 9.4 „Technical data“).

It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker. This stops the supply of electricity if the leakage current to earth exceeds 30 mA for 30 ms or it has an earth tester circuit.

When using an extension lead, check the minimum cross-sec- tions of the cable:

Cable length

Cross section

m

<16 A

<25 A

 

up to 20 m

ø1.5mm²

ø2.5mm²

 

 

 

20 to 50 m

ø2.5mm²

ø4.0mm²

 

 

 

Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is maintained.

Never spray water on to the upper section of the vacuum cleaner. Danger for persons, risk or short-circuiting.

Observe the latest edition of the IEC regulations.

1) Option depending on model

3

ATTIX 360-2M

ATTIX 550-2M / ATTIX 560-2MXC

ATTIX 751-2M / ATTIX 761-2MXC

english

Tool socket

Use the socket on the vacuum

2. Switch off the appliance to

 

 

cleaner for the purpose defined

be connected.

 

 

in

the

operating instructions

 

 

 

only.

 

CAUTION!

 

 

 

 

 

Follow the operating instructions

 

 

Before

plugging an appliance

and safety instructions for appli-

 

 

into the appliance socket:

ances connected to the power

 

 

1.

Switch off the vacuum clean-

tool socket.

 

 

 

er

 

 

Maintenance, cleaning and

Only carry

out maintenance

repair

work described in the operating

 

instructions.

 

 

Always pull out the mains plug

 

before cleaning and mainte-

 

nance of the vacuum cleaner.

 

During maintenance and clean-

 

ing, handle the vacuum cleaner

 

in such a manner that there is no

 

danger for maintenance staff or

 

other persons.

 

In the maintenance area

 

– use filtered compulsory ven-

 

 

tilation

 

 

wear protective clothing

 

clean the

maintenance are

 

 

so that no harmful substanc-

 

 

es get into the surroundings.

Before removing the vacuum cleaner from the area contaminated with harmful substances:

Accessories and spare parts

Use

only the brushes supplied

 

with

the vacuum cleaner or

 

specified in the operating manu-

 

al. The use of other brushes can

clean the outside of the vacuum cleaner, wipe it clean or pack the vacuum cleaner in well sealed packaging

and avoid spreading deposited harmful dust.

During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be:

packed in well sealed bags

disposed of in a manner that complies with valid regulations for such waste removal.

A dust test must be performed at least once every year by NilfiskAlto service or a trained person. This test includes, for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air and the control equipment works properly.

adversely affect safety.

Use only original Nilfisk-Alto accessories and spare parts (see section 9.5). The use of other parts can adversely affect safety.

2 Description

2.1 Purpose

This cleaner is suitable to pick

 

up dry, nonflammable dust, liq-

 

uids, sawdust and hazardous

 

dusts with maximum room con-

 

centration values 0.1 mg/m3

 

(dust class M).

Depending on how hazardous the dust is, the cleaner must be fitted with appropriate filters. See table in section 5.1.1.

4

1) Option depending on model

Loading...
+ 12 hidden pages