Loading...WHILE YOU'RE TAKING PICTURES
Using the Built-In Flash
The flash can be used when the subject is within 0.6 to 3m (2.0 to 9.8 feet) when using a film with
ISO 100 and the AF
Zoom-Nikkor 35~80mm fl4-fl5.6 D lens.
If i blinks inside the viewfinder, use the built-in flash. Press the flash lock release button. Lightly press the shutter release button, wait for the ■ to come on in the viewfinder. Confirm the • (in-focus indicator) appears in the viewfinder, then fully depress the shutter release button. ® If i blinks after shooting for a few seconds, this means that the light
might be insufficient. Check shooting distance, and if necessary, move closer to subject and take a picture with flash again.
If a stationary subject starts to move
Remove your finger from the shutter release button and lightly press again to restart autofocus.
viewfinder Information
0 “ —0 —
H t blinks—Overexposure |
[ ] blinks inside viewfinder— |
|
L J — |
possible
Use a film with lower ISO, or use a Nikon Neutral Density Filter.
lo blìrìks—Underexposure possible
Use the built-in flash.
“3^ i blinks (without flash)—
Flash recommendation
This happens when it's dark. Use the built-in flash.
Picture blur is possible
The light is probably dim and the automatically selected shutter speed is slow. This can cause picture blur due to camera shake. Hold the camera steady, or use a tripod. Or, use a builtin flash.
• blinks—Unacceptable condition for autofocus
Autofocus requires that the subject have some contrast or details to focus upon. Make sure the subject conforms. You can't focus on the sky, a blank wall, a very shiny surface, a subject which has no details or contrast.
WHEN YOU'VE TAKEN A COMPLETE ROLL
Auto Rewind
When the film reaches the end of roll, it rewinds auto matically. After rewinding is completed, remove the film.
® When battery power is very weak, or when temperature is very low, film may not rewind at the end of roll; Err will appear in the LCD panel. In this case, replace battery with a fresh one, or wait for the temperature to rise and then press the rewind button.
To rewind film at mid-roll: Press the rewind button on the camera bottom.
Loading...