Nikon
m
INSTRUCTION MANUAL
NOMENCLATURE
Shutter-speed dial |
|
|
|
|
Extra-long exposure scale |
|
|
|
|
Shutter-speed scale |
|
|
|
|
Mirror lockup lever |
|
|
|
|
Depth-of-field preview button |
|
o |
|
|
Self-timer |
|
1 |
|
|
Timer index |
|
é |
|
|
|
|
|
|
|
|
|
|
k |
|
Timer scale |
■fc 1 — |
|
||
Lens mounting flange |
|
|
|
|
Motor drive shutter-release coupling
Finder mounting clamps
Maximum aperture indicator
EE aperture control contacts
Threaded sync terminal
Neckstrap eyelet
Lens mounting index
Lens release button
EE aperture control coupling
Reflex mirror
Meter coupling pin
Tripod socket
Battery chamber
0/C key
Focusing ring
Depth-of-field indicators
Distance scale
Aperture ring
External “correct exposure" indicator
Ready-light contact
Film rewind knob
Film rewind crank
Accessory shoe
Flot-shoe contact
Finder release button
Eyepiece shutter control
Aperture/Distance scale index
Meter coupling prong
Illuminator switch
Viewfinder eyepiece (w/ready-light)
CONTENTS________
Foreword....................................
Preparation for use.....................
Installing the batteries.............
Checking the batteries.............
Loading the film.......................
Prior to shooting .....................
Memo holder...........................
Setting the film speed..............
Operation of camera controls .
Setting the shutter speed . . .
Setting the aperture ................
Film-advance lever...................
Frame counter..........................
T-L fingerguard ........................
Self-timer..................................
Unloading film............................
Holding the camera....................
Shutter release operation . . . .
Operation via cable release . .
Focusing......................................
Infrared photography..............
Film-plane indicator.................
Depth of field .............................
Depth-of-field preview button
Depth-of-field Indicators . . .
Exposure measurement.............
Determining exposure.............
Exposure control......................
5 |
Metering range............................................. |
24 |
6 |
Extreme low-light metering ........................ |
25 |
6 |
Time exposures............................................. |
25 |
6 |
Eyepiece shutter operation.......................... |
26 |
7 |
High-contrast lighting situations ................. |
26 |
8 |
Stop-down exposure measurement............... |
28 |
9 |
Exposure compensation adjustments . . . . |
30 |
9 |
Adjustments for focusing screens................ |
30 |
10 |
Adjustments for film compensation . . . . |
32 |
10 |
Multiple exposures......................................... |
33 |
10 |
Mirror lockup ................................................. |
33 |
11 |
Flash synchronization..................................... |
34 |
11 |
Ready-light .................................................... |
35 |
12 |
Finder illuminator .......................................... |
35 |
12 Tips on camera care ....................................... |
36 |
|
13 |
Changing the lens............................................ |
38 |
14 |
Maximum aperture indicator....................... |
39 |
15 |
Changing the viewfinder ................................ |
40 |
15 |
Changing the focusing screen ....................... |
41 |
16 |
Focusing screen selector guide.................... |
42 |
18 |
Focusing screen selector chart.................... |
43 |
18 |
Accessories...................................................... |
44 |
19 |
Features/specifications .................................. |
46 |
19
20
22
22
24
FOREWORD
The Nikon F2SB Photomic camera offers the serious photographer the ultimate in quality, performance, con venience and versatility. At the same time, it is engineer ed to take the guesswork out of photography with auto matic features anyone can learn to use in minutes. To get the most out of your Nikon F2SB Photomic, study the instructions carefully and practice using the controls before you load any film in the camera. Keep this book let handy for ready reference until you have mastered its basics, and follow the suggestions for camera care given on page 36. The few moments you spend familiar izing yourself with the camera will guarantee you the best results and increase your picture-taking enjoyment many times over.
PREPARATION FOR USE
Installing the Batteries |
Checking the Batteries |
The exposure meter in the Photomic finder is powered by two high-performance silver-oxide batteries mounted in the battery chamber in the baseplate of the camera. To install the batteries, first remove the battery chamber cover (turn it 90° counterclockwise using a coin or simi lar object); then, place two 1.5V silver-oxide (button cell type) batteries in the chamber, making sure that the plus (-I-) side of each unit faces out. After inserting and properly seating the batteries, replace the cover and lock it to secure the assembly.
The camera’s film-advance lever serves as the ON-OFF switch for the Photomic finder. Thus, to check battery power, perform the following: Pull out the lever just far enough to uncover the red meter ON index on the top of the camera; then, look within the finder to see if any of the LED exposure indicators are illuminated. If any of the indicators are lit, battery power is sufficient for proper operation. If none of the LEDs light, battery positioning should be checked; then, if none of the LEDs light, replace batteries.
Note: Remove the batteries when the camera is not to be used for a long period; this will prevent leakage within the camera. Also, keep the camera as warm as possible when operating under cold-weather conditions; otherwise, the batteries may fail to function. (See “Tips on Camera Care" on page 36 for additional information.)
Loading the Film
Fold out the O/C key at the baseplate of the camera and turn it counterclockwise 180° until the arrow points to the “0” (open) mark and the camera back pops open. Pull up the rewind knob as far as it will go, and drop a standard film cartridge or a special Nikon reloadable cassette into the left-hand film chamber with the film leader aligned along the film guide rails.
After positioning the cartridge and film leader properly, push the rewind knob down to hold the cartridge in
place and insert the end of the film leader into any of the slots in the film take-up spool. If necessary, release the shutter and, then, stroke the film-advance lever slow ly to make sure that the leader winds smoothly on the spool and that the film edge perforations engage with the film sprocket roller. When satisfied that the film is properly feeding and is traveling correctly along the film guide rails, close the camera back and return the 0/C key to its normal storage position. (Also, see “Tips on Camera Care” on page 36.)
PREPARATION FOR USE—continued
Prior to Shooting
Fold out the rewind crank and turn it gently in the di rection of the engraved arrow until you feel a slight ten sion; this tension indicates that there is no more slack in the film cartridge. (Be sure not to rewind the film back into the cartridge.)
Advance the film and make two blank exposures to dis pose of the initial portion of the film exposed during loading (for film advance operation, see page 11). While
advancing the film, check that the rewind crank turns in the direction opposite the arrow. Crank rotation indica tes that the film has been loaded properly and is being advanced. Then, fold the crank flat for storage.
After advancing the film two frames to dispose of the initial portion of the leader, the frame counter at the upper right of the camera will indicate “0”; now, ad vance the film one more frame to prepare the camera for taking the first exposure.
Memo Holder
A special holder is provided on the camera back for con venient storage of information pertinent to the photo graphy. A piece of paper or the end-flap torn from the film carton can be inserted to serve as a reminder of the film type, film speed and number of exposures.
Setting the Film Speed
The camera’s exposure meter must be adjusted to the speed of the film in use to ensure correct measurement; thus, a film-speed scale (ASA graduations) and an index ring are provided on the finder. To adjust, lift the milled ASA film-speed index ring and turn it until the red index triangle is aligned with the ASA value for the film in use. The meter is sensitive across the full range of from ASA 12 to ASA 6400. The film-speed dial has two dots be tween each pair of numbers for intermediate settings such as 64, 80, 125, etc.
2000 |
'OOo |
|
2500 |
|
|
4000 |
^ |
|
5000 |
|
|
OPERATION OF CAMERA CONTROLS
Setting the Shutter Speed
The Nikon F2SB Photomic camera can be set to the de sired shutter speed either before or after the shutter is wound. Speeds of from 1 second to 1/2000 second are set via the shutter-speed selector fitted on the finder; the selector is also provided with a “B” setting for longer time exposures. To set the shutter speed, turn the selec tor until the desired speed is aligned with the white dot; when aligned with settings of from 2 to 2000, the actual shutter speed will be a fractional value of from 1/2 sec ond to 1/2000 second. The red line provided between the 1/60 sec. and 1/125 sec. settings indicates 1/80 second—the fastest shutter speed providing X synchroni zation for use with electronic flash units. When more precise settings are required, intermediate shutter speeds
of from 1/80 sec. to 1/2000 sec. are usable. At the "B” setting, the shutter speed remains open as long as the shutter-release button is depressed. (See “Flash Synchro nization” on page 34 for additional information on flash photography.)
Setting the Aperture
The ring fitted at the base of the lens adjusts the size of the aperture (or opening) in the iris diaphragm. To pre set the lens aperture, turn the aperture ring until the de sired f/number setting on the scale is aligned with the index mark provided on the lens. The iris diaphragm can also be set to intermediate apertures between the click stop settings for more precise exposures.
to
Film-Advance Lever
The film-advance lever simultaneously advances the film, cocks the shutter and operates the frame counter. It also switches on the exposure meter in the Photomic finder. To advance the film, stroke the lever with the right thumb in a single stroke (or series of strokes) total ing only 120. A built-in locking device prevents the shutter from being released unless it is fully cocked and the film advanced a full frame. At the completion of film advance, release the lever and it will return to the 20 standoff position ready for shutter release.
Note: Do not apply pressure to the film-advance lever while making an exposure.
Frame Counter
The frame counter operates automatically to show how many frames have been exposed. When the camera back is opened for loading, the counter is reset to the “S” (start) position, two frames before “0”. Once the camera is loaded and the back closed, each film-advance/ shutter-release sequence will cause the frame counter to advance one position until the maximum 20 or 36 frames have been exposed. The dial of the frame counter is calibrated with dots (for odd numbers) and figures (for even numbers), and with settings of “S,” “12,” “20” and “36” in red.
11
OPERATION OF CAMERA CONTROLS—continued
T-L Fingerguard
The shutter-release button of the Nikon F2SB Photomic camera is fitted with a fingerguard that also doubles as the shutter operation mode selector. Set to the middle position, the fingerguard provides for normal shutter release via the shutter button. To lock the shutter to pre vent accidental release, lift up and turn the fingerguard until the index dot aligns with the “L” (lock) marking. For time exposures preset via the camera’s built-in self timer, lift up and turn the fingerguard until the index dot aligns with the “T” (time) marking. (See “Time Ex posures” on page 25 for details.)
Self-Timer
The built-in self-timer can be used to trip the shutter after a delay of from 2 to 10 seconds. The numbers marked on the timer scale indicate the delay in seconds. To take a picture using the self-timer to fire the camera, first set the aperture and shutter-speed controls, advance the film, and cock the self-timer by turning its lever downward until the index line (on the lever) aligns with the figure (on the scale) corresponding to the desired number of seconds delay; then, simply press the small button just above the timer to start the countdown, with shutter release occurring at the completion of the cycle. Note that the self-timer can be set either before or after advancing film; also, if you decide not to use the self-timer after setting it, simply use the shutter button in the normal way to make the next exposure and to release the self-timer for resetting to the off position. The self-timer may not be used at the “B” shutter-speed dial setting.
UNLOADING FILM
When the frame counter indicates that the last exposure has been made, or when the film-advance lever can no longer be stroked, the roll of film has been fully exposed and it should be removed.
To unload the camera, first press the rewind button on the camera baseplate; then, unfold the rewind crank and turn it in the direction of the engraved arrow, using a smooth, even pressure. When no more tension is felt and the film advance indicator (the colored dot on the re wind button) stops rotating, the film leader has left the take-up spool and the camera back may be opened.
After opening the camera back, pull the rewind knob up as far as it will go and remove the film cartridge. Note that as the film advance lever is stroked for the next ex posure, the rewind button will be released to engage the film-advance mechanism.
Caution: Be careful not to push the rewind button during filmadvance operation. Should this occur, the film transport will temporarily stop and double exposure may result.
Note: The camera back can be removed from the body by de pressing the locking catch on the hinge. Removal of the camera back is necessary when the camera is used with any accessory back such as the 250 Magazine Back MF-1 or the Camera Back MF-3, both for motorized photography.
13
HOLDING THE CAMERA
Camera shake is one of the most common causes of un sharp pictures, especially at slow shutter speeds. Learn to hold the camera correctly and practice steady shutter squeezing. The photos show the best ways to hold the camera for sharp pictures.
Wrap the fingers of the right hand around the camera body so that the index finger rests comfortably on the shutter-release button and the thumb fits between the camera body and the film-advance lever. Position the camera so that the eye looks through the center of the viewfinder. Cradle the camera in the left hand for addi tional support, with the left thumb and index finger grasping the focusing ring. From this basic stance, the camera can be properly supported and easily switched from horizontal to vertical format shooting. Asa general rule, the slowest shutter speed you should use with the camera hand-held is equal to the reciprocal of the focal length of the lens in use (e.g., for a 500mm lens, use 1/500 sec.; fora 105mm lens, use 1/125 sec.). However, as the ability to hold the camera steady may vary with each individual, we recommend that you experiment. In general, the higher the selected shutter speed, the sharper the picture.
14