New Holland BC5000 Series
Small Square Baler Specifications
BC5050 BC5060 BC5070 BC5080
MODEL
BALE SIZE:
Cross section, in. (cm)
Length, in. (cm)
SUPER-SWEEP PICKUP:
Width inside, in. (m)
Width on flare, in. (m)
Number of teeth
Floating windguard
Drive
Gauge wheel
ROTARY FEEDING SYSTEM:
Type
Drive
FLOW-ACTION® FEEDING SYSTEM:
Type
Drive
FEED OPENING, sq. in. (cm3)
PLUNGER:
Stroke length, in. (cm)
Speed (540 rpm)
Construction
TYING MECHANISMS:
Type
Protection
Capacity (twine)
(wire)
MAIN DRIVE:
Flywheel diameter, in. (cm)
PTO
Protection
Gearbox
TIRES:
Flotation (right) (left)
DIMENSIONS:
Height (max.), in. (cm) Width, in. (cm) Length:, in. (cm)
With 3-joint PTO and quarter-turn bale chute
BC5050 |
BC5060 |
BC5070 |
BC5080 |
||||
14x18 (36x46) |
14x18 (36x46) |
14x18 (36x46) |
16x18 (41x48) |
||||
................................................. |
............................. |
|
Adjustable, 12 to 52 (31 to 132) .............................................................................. |
|
|
||
65 |
(1.65) |
65 |
(1.65) |
75 |
(1.9) |
75 |
(1.9) |
70 |
(1.8) |
70 |
(1.8) |
80 |
(2) |
80 |
(2) |
88 on four tooth bars |
110 on five tooth bars |
156 on six tooth bars |
156 on six tooth bars |
||||
Eight rods |
Eight rods |
Thirteen rods |
Thirteen rods |
||||
........ |
V-belt to roller chain to “lost motion” reel drive .......... |
— |
|
— |
|
||
3.00x12; semi - pneumatic |
3.00x12; semi-pneumatic |
15x6.00x6 |
15x6.00x6 |
||||
— |
|
Packer fork in combination |
Packer fork in combination |
Packer fork in combination |
|||
|
|
with two paired rotors |
with three paired rotors |
with three paired rotors |
|||
— |
|
............................ |
Chain from main drive shaft; sealed ball bearings on all shafts .......................... |
||||
Six feeder tines on a moving |
— |
|
— |
|
— |
|
|
finger bar |
|
|
|
|
|
|
|
Chain; sealed ball bearings |
— |
|
— |
|
— |
|
|
283 (1826) |
283 (1826) |
283 (1826) |
318 (2052) |
||||
30 |
(76.2) |
30 |
(76.2) |
30 |
(76.2) |
30 |
(76.2) |
79 SPM |
93 SPM |
93 SPM |
93 SPM |
||||
.......... |
High-strengthsteelthroughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions ........ |
||||||
Knotter |
Knotter or twister |
Knotter or twister (heavy-duty) |
Knotter (heavy-duty) |
||||
Shearbolt |
Shearbolt |
Shearbolt |
Shearbolt |
||||
Four balls |
Six balls |
Eight balls |
Eight balls |
||||
NA |
|
Four coils |
Four coils |
NA |
|
||
22 |
(56) |
22 |
(56) |
22 |
(56) |
22 |
(56) |
Three - joint |
Three-joint |
Three-joint |
Three-joint |
||||
.................................................. |
...................... |
|
Shearbolt, overrunning and slip clutches ........................................................................ |
|
|
||
................................................ |
Hypoid with tapered roller bearings; heat-treated alloy steel running in oil.............................................. |
|
|||||
25x7.50 - 15, 6PR |
27x9.50-15, 6 PR |
27x9.50-15, 6PR |
11Lx15, 6PR |
||||
27x9.50 - 15, 6PR |
31x13.50-15, 6PR |
31x13.50-15, 6PR |
14Lx16.1, 6PR |
||||
58 |
(146) |
70 |
(178) |
71 |
(180) |
71 |
(180) |
108 (275) |
110 (279) |
120 (304) |
120 (304) |
||||
240 (610) |
247 (626) |
247 (626) |
247 (626) |
Page 1 of 2