New Holland BC5050, BC5080, BC5060, BC5000, BC5070 User Manual

5 (1)
New Holland BC5050, BC5080, BC5060, BC5000, BC5070 User Manual

New Holland BC5000 Series

Small Square Baler Specifications

BC5050 BC5060 BC5070 BC5080

MODEL

BALE SIZE:

Cross section, in. (cm)

Length, in. (cm)

SUPER-SWEEP PICKUP:

Width inside, in. (m)

Width on flare, in. (m)

Number of teeth

Floating windguard

Drive

Gauge wheel

ROTARY FEEDING SYSTEM:

Type

Drive

FLOW-ACTION® FEEDING SYSTEM:

Type

Drive

FEED OPENING, sq. in. (cm3)

PLUNGER:

Stroke length, in. (cm)

Speed (540 rpm)

Construction

TYING MECHANISMS:

Type

Protection

Capacity (twine)

(wire)

MAIN DRIVE:

Flywheel diameter, in. (cm)

PTO

Protection

Gearbox

TIRES:

Flotation (right) (left)

DIMENSIONS:

Height (max.), in. (cm) Width, in. (cm) Length:, in. (cm)

With 3-joint PTO and quarter-turn bale chute

BC5050

BC5060

BC5070

BC5080

14x18 (36x46)

14x18 (36x46)

14x18 (36x46)

16x18 (41x48)

.................................................

.............................

 

Adjustable, 12 to 52 (31 to 132) ..............................................................................

 

 

65

(1.65)

65

(1.65)

75

(1.9)

75

(1.9)

70

(1.8)

70

(1.8)

80

(2)

80

(2)

88 on four tooth bars

110 on five tooth bars

156 on six tooth bars

156 on six tooth bars

Eight rods

Eight rods

Thirteen rods

Thirteen rods

........

V-belt to roller chain to “lost motion” reel drive ..........

 

 

3.00x12; semi - pneumatic

3.00x12; semi-pneumatic

15x6.00x6

15x6.00x6

 

Packer fork in combination

Packer fork in combination

Packer fork in combination

 

 

with two paired rotors

with three paired rotors

with three paired rotors

 

............................

Chain from main drive shaft; sealed ball bearings on all shafts ..........................

Six feeder tines on a moving

 

 

 

finger bar

 

 

 

 

 

 

Chain; sealed ball bearings

 

 

 

283 (1826)

283 (1826)

283 (1826)

318 (2052)

30

(76.2)

30

(76.2)

30

(76.2)

30

(76.2)

79 SPM

93 SPM

93 SPM

93 SPM

..........

High-strengthsteelthroughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions ........

Knotter

Knotter or twister

Knotter or twister (heavy-duty)

Knotter (heavy-duty)

Shearbolt

Shearbolt

Shearbolt

Shearbolt

Four balls

Six balls

Eight balls

Eight balls

NA

 

Four coils

Four coils

NA

 

22

(56)

22

(56)

22

(56)

22

(56)

Three - joint

Three-joint

Three-joint

Three-joint

..................................................

......................

 

Shearbolt, overrunning and slip clutches ........................................................................

 

 

................................................

Hypoid with tapered roller bearings; heat-treated alloy steel running in oil..............................................

 

25x7.50 - 15, 6PR

27x9.50-15, 6 PR

27x9.50-15, 6PR

11Lx15, 6PR

27x9.50 - 15, 6PR

31x13.50-15, 6PR

31x13.50-15, 6PR

14Lx16.1, 6PR

58

(146)

70

(178)

71

(180)

71

(180)

108 (275)

110 (279)

120 (304)

120 (304)

240 (610)

247 (626)

247 (626)

247 (626)

Page 1 of 2

Loading...
+ 1 hidden pages