Newcon Optik SIB 20X 50M User Manual

WARRANTY

NEWCON OPTIK warrants this product against defects in material and

workmanship for one year from the date of the original date of consumer's
purchase, but no more than 18 months from the date of manufacturing. If
your Newcon product proves to be defective during this period, please bring
the product securely packaged in its original container or an equivalent,
along with proof of the date of original purchase, to your Newcon Dealer.
Newcon will repair (or at its option replace), the product or part thereof,
which, on inspection by Newcon, is found to be defective in materials or
workmanship. Should you experience any difficulties with your Newcon Optik
product, consult the enclosed manual. If the problem remains unresolved,
contact our customer support department at [phone] or toll free at 1­877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Eastern
Standard Time. The customer service email address is
[e-mail].

At no time should the equipment be sent back to Newcon without
following the instructions of our technical support department.
Newcon accepts no responsibility for unauthorized returns.

The authorized defective products should be shipped to:

From USA only: 2331 Superior Ave. Cleveland, OH 44114
From all other countries: 105 Sparks Ave., Toronto ON,

M2H 2S5, CANADA

What This Warranty Does Not Cover:
NEWCON OPTIK is not responsible for warranty service should the product

fail to be properly maintained or fail to function properly as a result of misuse,
abuse, improper installation, neglect, damage caused by disasters such as
fire, flood, lightning, improper electrical current, or service other than by a
NEWCON Authorized Service. Postage, insurance, or shipping costs
incurred in presenting your NEWCON product for warranty service are your
responsibility. Please include a check or money order made out to NEWCON
OPTIK for the amount of $15.00 to cover shipping and handling. This covers
products shipped in USA or Canada only.

ACCEPTANCE CERTIFICATE: Stabilized Image Binocular

Serial Number _______________________________
Model ______SIB 20x 50M ______________________
corresponds to technical conditions and is admitted for use.

Date of production -___________________
Place for seal
Quality inspector ____________________

(signature)

Operation Manual

SIB 20x50M

Stabilized Image Binocular

105 Sparks Ave., Toronto ON, M2H 2S5 Canada

Congratulations on purchasing the

SIB 20x50M Stabilized Image Binoculars.

Please read carefully the user manual prior to activation

This unique optical instrument utilizes a revolutionary patented mechanical
system (no need for batteries!) to deliver a stabilized image. An observer can
use this high power magnification binocular aboard aircraft, land vehicles,
boats or other moving or vibrating platforms.

PRECAUTIONS:

The SIB 20x50M is a sophisticated mechanical apparatus, and should be
handled with due care:

• Never disassemble the unit

• Keep your device away from direct sunlight, impacts, dust, permanent

moisture, and sudden changes of temperatures.

• Do not touch the optical surfaces with fingers. Doing so may damage the
anti-reflection coating.

• Cleaning of optical surfaces is possible only with professional camera
lens cleaning supplies.

• To clean the exterior of the device, use only a soft clean cloth.

• Do not take the cover off the lens if not necessary.

• Keep away from heating appliances and central heating.

• Do not apply superfluous efforts at work with lens assembly, agile

elements and thread connections.

Note: In order to enhance optical performance, the lenses and prisms are
made of special glass. This type of glass may contain tiny air bubbles, which
do not affect the binocular performance.

OPERATION:

• Unpack the unit from the box. Open the lens covers (2).

• Adjust the distance between the eyes by turning both eyepiece

assemblies until two images converge into one. This adjustment is made
tough intentionally to provide enhanced water resistance.

• Adjust the focus for the left eye using the focus adjustment knob (4).

• Finalize focus adjustment for the right eye by rotation of the eyepiece

adjustment knob (3).

• To activate the stabilization mechanism, press firmly and hold the button

(5).

• To disengage the stabilization mechanism, release the button. You can

use the unit as a regular 20x50M binocular now.

FEATURES:

• Stabilized image

• Rigid construction

• Surveillance under motion conditions

• No batteries required

• Weather proof, water resistant

• Wide angle field of view

• Standard tripod socket (optional)

CONSTRUCTION:

1

1 Body
2 Objective lens
3 Eyepiece focus adjustment knob
4 Stabilization button

2

SPECIFICATIONS:

Magnification
Objective, mm
Compensation angle
Field of view
Eye relief, mm
Resolution in the middle
Dimensions, mm
Weight, kg

3

4

20
50

±5°

3.2°

10.5

3.6”

217x158x69

1.250