New Holland H6700 Series Heavy-duty
Disc Mower Specifications
H6730 |
H6740 |
H6750 |
|
|
|
MODEL |
|
|
H6730 |
H6740 |
H6750 |
CUTTER BAR |
|
|
|
|
|
Cutting width, ft. in. (mm) |
6' 8" (2040) |
7' 10" (2400) |
9' 2" (2800) |
||
Cutting height, in. (mm) ......................................................................... |
..................................... |
95-3.25 (24-82.5)............................................................................................... |
|
||
Cutter bar tilt angle, degrees.................................................................................................................. |
|
0 to -10........................................................................................................ |
|
||
Cutter bar operating range, degrees |
+18 to -32 |
+18 to -30 |
+18 to -28 |
||
Breakaway angle, degrees ...................................................................... |
................................................. |
19............................................................................................................ |
|
||
Type cutterbar .............................................................................................................. |
|
|
Modular with individual sealed reservoirs............................................................................. |
|
|
Cutterbar drivetrain protection....................................................................................... |
|
Std.-frangible splines in disc drive hub............................................................................... |
|
||
Number of discs |
|
5 |
6 |
7 |
|
Knives per disc.......................................................................................................................................... |
|
|
2............................................................................................................. |
|
|
Disc cutting diameter, in. (mm) ........................................................................................................... |
|
19.7 (500) ..................................................................................................... |
|
||
Disc drive............................................................................................................................. |
|
|
|
Bevel gears in sealed modules...................................................................................... |
|
Disc speed, RPM....................................................................................... |
|
.............................................. |
3,000 ......................................................................................................... |
|
|
DRIVELINE |
|
|
|
|
|
Minimum PTO horsepower required, hp (kW)1 |
45 (33.5) |
55 (40.9) |
60 (44.7) |
||
Input speed, RPM................................................................ |
|
.................................................................... |
540........................................................................................................... |
|
|
Driveline protection.................................................................................................................. |
|
|
Belt drive to cutter bar............................................................................................ |
|
|
Overrunning clutch........................................................................................................................... |
|
|
On PTO shaft ................................................................................................... |
|
|
Belt tension .......................................................................................................... |
|
|
Spring-loaded tensioner with adjustment gauge........................................................................ |
|
|
HYDRAULICS AND HITCH |
|
|
|
||
Hydraulic circuits required................................................................................................................... |
|
One remote..................................................................................................... |
|
||
Minimum relief pressure required, psi (bar)............................................. |
........................................ |
1,500 (104) .................................................................................................... |
|
||
Hitch |
|
|
Category I or II |
Category II |
Category II |
DIMENSIONS AND WEIGHT |
|
|
|
||
Overall width, in. (mm) |
|
138.75 (3524) |
160.25 (4070) |
181.75 (4616) |
|
Overall length, in. (mm) |
42.5 (1080) |
50.5 (1283) |
50.5 (1283) |
||
Height - transport position, in. (mm) |
98 (2489)2 |
119.5 (3035)3 |
141 (3581)3 |
||
Weight, lb. (kg) |
|
1,200 (546) |
1,460 (662) |
1,590 (698) |
1Recommended for use with tractors having a fully enclosed cab.
2Transport height is based on 24-inch (609-mm) hitch-pin height above ground on H6730 model.
3Transport height is based on 18-inch (457-mm) hitch-pin height above ground on H6740 and H6750 models.
Page 1of 3