New Holland
Crop-Chopper® Flail Harvester
38
MODEL |
38 |
Width, in transport, ft. in. (m) |
9’8” (2.94) |
Width, in operation, ft. in. (m) |
10’10” (3.30) |
Height, overall, ft. in. (m) |
10’2” (3.09) |
Length, overall, ft. in. (m) |
10’4” (3.15) |
Weight, lbs. (kg) |
2,020 (898) |
Cutting width, in. (m) |
72 (1.83m) |
Cutting height, in. (mm) |
2 to 7 (50 to 180) |
Rotor speed, rpm |
1,373 |
Rotor flails |
40 |
Cutterhead knives |
3 standard |
Cutterhead paddles |
Cupped |
Cutterhead speed, rpm |
966 |
Number of paddles |
3 |
Adjustable Hitch |
2 positions |
Drive, rpm |
540 PTO with yoke and safety shield |
Overload Protection |
Slip and overrunning clutches and shearbolt |
Tires |
27x7.50-15 |
Visit our Web site at www.newholland.com/na. Or, call toll-free866-NEW-HLND (866-639-4563).
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1 of 1