Kurzanleitung
Elastische Aufhängung
EA 1 ... Z 48
Brief instruction
EA 1 ... Z 48
Elastic Suspensions
Elastische Aufhängungen bieten einen wirkungsvollen Schutz vor Körperschall (Trittschall) und
mechanischen Stößen.
Das Mikrophon wird von oben in den Innenkorb
eingesetzt und mit einer Rändelmutter am Innenkorb festgeschraubt.
Der schwenkbare Gewindeanschluss zur Befestigung auf Stativen hat 5/8”-27-Gang. Ein Reduzierstück zur Verbindung mit 1/2”- und 3/8”-Gewindezapfen wird mitgeliefert.
Die Elastischen Aufhängungen sind vollständig aus
Metall gefertigt. Sie sind (außer EA 50) in nickelmatt und schwarz-matt (mt) erhältlich. Die Gummibänder sind als Ersatzteile in heller und dunkelgrauer Farbe verfügbar.
Folgende Elastische Aufhängungen sind für Großmembranmikrophone erhältlich:
Elastische Aufhängung/
Elastic Suspension
EA 1 (mt) M 147 Tube, TLM 103 ,
EA 2 (mt) TLM 127, TLM 193, D-01 montiert/mounted ersetzt/replaces
EA 47 (U 47), (U 47 fet) nur/only nickel
EA 50 TLM 50 beigefügt/enclosed nur schwarz-matt/only
EA 87 (mt) U 87 Ai, (U 87i), (U 77) montiert/mounted
geeignet für Mikrophon/suited for
microphone
TLM 127, TLM 193
Elastic Suspensions provide effi cient protection
against structure-borne noise and mechanical
shocks.
The microphone is set into the inner cage from
above, and secured to the inner cage with a threaded nut.
It has a swivel mount with a 5/8“-27 female
thread that can be fastened to tripods. Included
is a threaded adapter to connect to 1/2“- and 3/8“
studs.
The Elastic Suspensions are fully made of metal.
They are available in nickel-matt (except EA 50)
and black-matt (mt). The elastic rubber bands are
available as spare parts in light grey and dark grey.
The following Elastic Suspensions are available for
large diaphragm microphones:
Rändelmutter/
threaded nut
montiert/mounted ersetzt/replaces
Bemerkung/note
EA 103, EA 193
EA 103, EA 193
black-matt
EA 89 (mt) U 89 montiert/mounted
EA 170 (mt) TLM 170 (R), M 149 Tube,
Z 48 (U 67) , (U 87), (M 269) nur/o nly nic kel
Konformitätserklärung
Die Georg Neumann GmbH erklärt, dass diese Geräte die
anwend baren CE-Nor men und -Vorsch riften er füllen.
Irrtümer und t echnische Ä nderungen vo rbehalten • Errors excepte d, subject to ch anges • Printed in Ger many • Publ. 07/07 52 3722/A01
Tel.: +49 (30) 417724 -0 • Fax: -50 • E- Mail: headoffi ce@neumann.co m • Website: ww w.neumann. com
M 150 Tube
Georg Neuman n GmbH • Ollenha uerstr. 98 • 13 403 Berlin • Ge rmany
Teil des Mikrophons/part
of microphone
Declaration of Conformity
Georg Neumann GmbH hereby declares that these devices
conform to the applicable CE standards and regulat ions.