Size:
2.73 Mb
Download

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| | | | |-dtim-interval

 

 

--wirelessDTIM period in beacon interval

| | | | |-extension-protection-spacing

--wirelessextension protection spacing

| | | | |-fragmentation-length

 

--wirelessfragmentation threshold(even

only)

 

 

 

 

| | | | |-guardinterval

 

 

--interval(from interference from other

transmissions)

 

 

 

 

| | | | |-knownap-add

 

 

--addknown access point

| | | | |-knownap-del

 

--deleteknown access point

| | | | |-macacl>

 

 

--modifywireless access control (ACL)

| | | | | |-add

 

 

--addwireless access control (ACL)

| | | | | |-del

 

 

--deletewireless access control (ACL)

| | | | |

 

 

 

 

| | | | |-macacl-add

 

 

--addwireless access control (ACL)

| | | | |-macacl-database

 

 

--deletewireless access control (ACL)

database

 

 

 

 

| | | | |-macacl-del

 

 

--deletewireless access control (ACL)

| | | | |-mcsrate

 

 

--transmitdata rate

| | | | |-mode

 

 

--enablewireless access control (ACL)

| | | | |-operation-mode

 

 

--wirelessoperation mode

| | | | |-power

 

 

--wirelesstransmit power

| | | | |-radio

--enablewireless radio

| | | | |-rate

 

 

--wirelesstransmission date rate

| | | | |-rifs-transmission

 

 

--enablesuccessive frame transmission at

different transmit powers

 

 

 

 

| | | | |-rogue-ap-detection

 

--enablerogue access point detection

| | | | |-rts-threshold

 

 

--wirelessRTS/CTS threshold

| | | | |-security-profile>

 

--createsecurity profile

| | | | | |-1>

 

--1stsecurity profile

| | | | | | |-authentication

 

--authenticationtype

| | | | | | |-encryption

 

 

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

 

 

--wirelesswep key 1

| | | | | | |-key2

 

 

--wirelesswep key 2

| | | | | | |-key3

 

 

--wirelesswep key 3

| | | | | | |-key4

 

 

--wirelesswep key 4

| | | | | | |-keyno

 

 

--keynumber

| | | | | | |-name

 

 

--profilename

| | | | | | |-presharedkey

 

 

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

 

 

 

| | | | | | |-ssid

 

 

--networkname(1-32chars)

| | | | | | |-status

 

 

--profilestatus

| | | | | | |-vlan-id

 

 

--VLANid

| | | | | | |-wep-pass-phrase

 

--wirelesswep passphrase key

| | | | | | |-wepkeytype

 

 

--wirelesswep key type

| | | | | |

 

 

 

 

| | | | | |-2>

 

 

--2ndsecurity profile

| | | | | | |-authentication

 

--authenticationtype

 

 

 

 

 

Command Line Reference

 

 

 

C-7

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | | |-3>

--3rdsecurity profile

| | | | | | |-authentication

--authenticationtype

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | | |-4>

--4thsecurity profile

| | | | | | |-authentication

--authenticationtype

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

 

 

C-8

Command Line Reference

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | | |-5>

--5thsecurity profile

| | | | | | |-authentication

--authenticationtype

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | | |-6>

--6thsecurity profile

| | | | | | |-authentication

--authenticationtype

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | | |-7>

--7thsecurity profile

| | | | | | |-authentication

--authenticationtype

 

 

Command Line Reference

C-9

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | | |-8>

--8thsecurity profile

| | | | | | |-authentication

--authenticationtype

| | | | | | |-encryption

--dataencryption

| | | | | | |-hide-network-name

--hidenetwork name

| | | | | | |-key1

--wirelesswep key 1

| | | | | | |-key2

--wirelesswep key 2

| | | | | | |-key3

--wirelesswep key 3

| | | | | | |-key4

--wirelesswep key 4

| | | | | | |-keyno

--keynumber

| | | | | | |-name

--profilename

| | | | | | |-presharedkey

--pre-sharedkey

| | | | | | |-security-separation

--disableassociated wireless client

communication

 

| | | | | | |-ssid

--networkname(1-32chars)

| | | | | | |-status

--profilestatus

| | | | | | |-vlan-id

--VLANid

| | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | |-wepkeytype

--wirelesswep key type

| | | | | |

 

| | | | |

 

| | | | |-wireless-bridge>

--wirelessbridge setting

| | | | | |-security-profile>

--createsecurity profile

| | | | | | |-1>

--1stsecurity profile

| | | | | | | |-authentication

--authenticationtype

| | | | | | | |-encryption

--dataencryption

| | | | | | | |-name

--profilename

| | | | | | | |-presharedkey

--presharedkey

| | | | | | | |-remote-mac

--remoteMAC

| | | | | | | |-status

--profilestatus

| | | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | | |-wepkey

--wirelesswep key

 

 

C-10

Command Line Reference

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| | | | | | | |-wepkeytype

--wirelesswep key type

| | | | | | |

 

 

| | | | | | |-2>

--2ndsecurity profile

| | | | | | | |-authentication

--authenticationtype

| | | | | | | |-encryption

--dataencryption

| | | | | | | |-name

--profilename

| | | | | | | |-presharedkey

--presharedkey

| | | | | | | |-remote-mac

--remoteMAC

| | | | | | | |-status

--profilestatus

| | | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | | |-wepkey

--wirelesswep key

| | | | | | | |-wepkeytype

--wirelesswep key type

| | | | | | |

 

 

| | | | | | |-3>

--3rdsecurity profile

| | | | | | | |-authentication

--authenticationtype

| | | | | | | |-encryption

--dataencryption

| | | | | | | |-name

--profilename

| | | | | | | |-presharedkey

--presharedkey

| | | | | | | |-remote-mac

--remoteMAC

| | | | | | | |-status

--profilestatus

| | | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | | |-wepkey

--wirelesswep key

| | | | | | | |-wepkeytype

--wirelesswep key type

| | | | | | |

 

 

| | | | | | |-4>

--4thsecurity profile

| | | | | | | |-authentication

--authenticationtype

| | | | | | | |-encryption

--dataencryption

| | | | | | | |-name

--profilename

| | | | | | | |-presharedkey

--presharedkey

| | | | | | | |-remote-mac

--remoteMAC

| | | | | | | |-status

--profilestatus

| | | | | | | |-wep-pass-phrase

--wirelesswep passphrase key

| | | | | | | |-wepkey

--wirelesswep key

| | | | | | | |-wepkeytype

--wirelesswep key type

| | | | | | |

 

 

| | | | | |

 

 

| | | | |

 

 

| | | | |-wmm>

 

--wmmsettings

| | | | | |-ap-data0-best-effort

 

--accesspoint best effort voice data

| | | | | |-ap-data1-background

 

--accesspointlow-prioritydata

| | | | | |-ap-data2-video

 

--accesspoint video data

| | | | | |-ap-data3-voice

 

--accesspoint voice data

| | | | | |-station-data0-best-effort

--stationbest effort voice data

| | | | | |-station-data1-background

 

--stationlow-prioritydata

| | | | | |-station-data2-video

 

--stationvideo data

| | | | | |-station-data3-voice

 

--stationvoice data

| | | | | |-support

 

--???

| | | | |

 

 

 

 

 

Command Line Reference

 

C-11

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| | | |

 

| | |

 

| |

 

| |-ip>

--sethost IP

| | |-address

--hostIP address

| | |-default-gateway

--IPaddress of default gateway

| | |-dhcp-client

--enabledhcp client

| | |-dns-server

--IPaddress of DNS server

| |

 

| |-log>

--syslogsetting

| | |-syslog

--enablesyslog client

| | |-syslog-server-ip

--syslogserver IP address

| | |-syslog-server-port

--syslogserver port number

| |

 

 

| |-radius>

 

 

| | |-accounting-server-primary

--primaryaccounting server

| | |-accounting-server-primary-port

--primaryaccounting server port

| | |-accounting-server-primary-sharedsecret

--primaryaccounting server shared

secret

 

 

| | |-accounting-server-secondary

--secondaryaccounting server

| | |-accounting-server-secondary-port

--secondaryaccounting server port

| | |-accounting-server-secondary-sharedsecret

--secondaryaccounting server

shared secret

 

 

| | |-authentication-server-primary

--primaryauthentication server

| | |-authentication-server-primary-port

--primarysystem accounting

server shared secret

 

 

| | |-authentication-server-primary-sharedsecret

--primaryauthentication

server shared secret

 

 

| | |-authentication-server-secondary

--secondaryauthentication server

| | |-authentication-server-secondary-port

--secondaryauthentication server

port

 

 

| | |-authentication-server-secondary-sharedsecret--secondaryauthentication server shared secret

| |

 

| |-remote>

--enableremote access via SSH

| | |-ssh-port

--SSHport

| | |-sshd

--SSHdaemon

| | |-telnet

--enableremote access via Telnet

| |

 

| |-snmp>

--SNMPsetting

| | |-description

--SNMPsystem description

| | |-read-community

--SNMPReadCommunity

| | |-snmp-status

--SNMPstatus

| | |-trap-community

--SNMPReadCommunity

| | |-trap-server

--SNMPTrapServer IP address

| | |-write-community

--SNMPWriteCommunity

| |

 

| |-spanning-tree

--enablespanning tree protocol

 

 

C-12

Command Line Reference

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

| |-time>

--timeSetting

| | |-custom-ntp-server

--customNTP server host name

| | |-daylightsaving

--daylightsaving

| | |-ntp-client

--NTPclient host name

| | |-ntp-server

--NTPserver host name

| | |-time-zone

--timezone

| |

 

| |-vlan>

--vlansettings

| | |-management-vlan

--vlanmanagement id

| | |-untagged-vlan

--untaggedvlan id

| | |-untagged-vlan-status

--untaggedvlan status

| |

 

|

 

|-exit

--logoutfrom CLI

|-file

--

|-firmware-upgrade

--uploadnew system firmware file

|-password

--systempassword

|-restore-configuration

--restoresystem configuration

|-restore-default-password

--restoredefault system password

|-show>

--showsystem settings

| |-configuration

--showsystem configuration

| |-interface>

--showwireless lan interface

| | |-eth>

--ethernetinterface

| | | |-statistics

--showethernet statistics

| | |

 

| | |-wlan>

--wlaninterface settings

| | | |-2.4GHz>

--2.4GHzwlan interface settings

| | | | |-configuration

--interfaceconfiguration

| | | | |-knownaplist

--knownaccess point list

| | | | |-stationlist

--stationlist

| | | | |-statistics

--interfacestatistics

| | | | |-trusted-stationlist

--trustedstation list

| | | | |-unknownaplist

--unknownaccess point list

| | | |

 

| | | |-5GHz>

--5GHzwlan interface settings

| | | | |-configuration

--interfaceconfiguration

| | | | |-knownaplist

--knownaccess point list

| | | | |-stationlist

--stationlist

| | | | |-statistics

--interfacestatistics

| | | | |-trusted-stationlist

--trustedstation list

| | | | |-unknownaplist

--unknownaccess point list

| | | |

 

| | |

 

| |

 

| |-log

--systemlog

| |-system

--systemsetting

Command Line Reference

C-13

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

C-14

Command Line Reference

v1.1, November 2009

Index

Numerics

access point name 2-6

2.4 GHz/5 GHz concurrent 1-2

access point, more than one 2-17

ACK 1-4

2.4Ghz 1-2

 

 

activity log 3-12

20 MHz 2-17

 

 

AES

20/40 MHz 2-17, 2-20

 

 

802.11n, recommended for 2-4

20/40MHz 2-19

 

 

with WPA2, with RADIUS 2-38

40 MHz 2-17

 

 

with WPA2-PSK2-42

5 GHz 1-2

 

aggregation length 4-6, 4-8

802.11a/b/g/n 1-4

1-2

aggregation, support for 1-4

standards compliance

AID see association ID

802.11a/n

 

 

A-MPDU(Aggregation of MAC Protocol Data Units)

default SSID 2-11

 

 

4-6, 4-8

802.11b/g/n 2-14

 

 

antenna 4-6

default SSID 2-11

 

 

2.4 GHz 1-9

802.11e 1-4, 2-21, 4-8

 

 

5 GHz 1-9

802.11n

 

accessories 4-15

data encryption option, recommendation 2-4

position 2-2, 2-11

802.1Q 2-33

 

associated stations

802.1Q VLAN

 

present in AWSL, only 3-16

 

association ID

enabling 2-6

 

802.1Q VLAN, support

1-2

authentication server settings

802.1x 2-25

 

IP address 2-30

 

port number 2-30

802.3af 1-3

 

 

shared secret 2-30, 2-31

A

 

auto or long preamble, support for 1-4

 

Auto UplinkTM 1-4

access control

 

autosensing ethernet, support for 1-3

MAC address filtering 1-3

autosensing, LAN interface 1-4

MAC authentication 2-44

available wireless station list (AWSL) 3-16

trusted wireless stations 1-3

available wireless stations list 2-45

access control list

 

 

AWSL table fields

MAC authentication 2-44

access point mode

 

channel 3-16

security options 2-25

MAC address 3-16

mode 3-16

 

 

 

 

Index-1

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

rate

3-16

coverage area 1-1, 2-11

SSID 3-16

CSMA/CA 4-5, 4-7

state

3-16

CSMA/CD (Carrier Sense Multiple Access with

status 3-16

Collision Detection) 4-5, 4-7

type

3-16

CTS (Clear to Send) 4-5

wireless network name (SSID) 3-16

B

 

D

 

 

 

back off 1-4

 

data encryption settings

 

Basic Service Set (BSS) 1-2

128 bits WEP 2-26

 

152 bits WEP 2-26

 

Basic Service Set Identifier (BSSID) 1-2

 

64 bits WEP 2-26

 

 

beacon generation, support for 1-4

AES 2-26

 

 

 

beacon interval 4-5, 4-7

none 2-26

 

 

 

TKIP 2-26

 

 

 

bridge

 

 

 

 

 

TKIP + AES 2-26

 

 

network authentication 2-25

 

 

data rates 802.11a/na

2-19

bridge mode wireless station

data rates 802.11bgn

2-17

 

wireless point to point bridge 4-10

 

wireless point-to-multi-pointbridge4-10

default access point name

2-6

BSSID 3-16

 

default channel 2-16, 2-22

C

 

default gateway, configure

2-14

 

default IP address

2-5, 2-13

Category 5 Ethernet cable 1-6

default password

2-5

 

 

default reset button 3-9

 

change password 3-10

 

 

 

default SSID 2-11

 

 

channel auto

 

 

 

testing connectivity

2-22

default SSID 802.11a/n 2-24

channel auto selection

2-22

default SSID 802.11b/g/n

2-24

channel interference 2-22

default user name

2-5

 

channel spacing 2-3, 2-19

default wireless access point name 2-11

channel spacing, recommended 2-16

DHCP

 

 

 

channel width 2-19

 

point-to-multi-pointbridging4-15

 

DHCP client

 

 

 

channel, auto

 

2-11

 

 

default setting

 

configuring channel/frequency 2-16

 

DHCP client, configure 2-13

channel, default 2-16

 

 

DHCP client/server

 

 

CLI

 

 

 

 

support 1-2

 

 

 

command set 3-4

 

 

 

 

 

DHCP server

 

 

 

command line interface (CLI) 3-3

 

 

 

 

 

configure 4-1

 

 

 

configuration file 3-6

on LAN 2-13

backup or restore 3-7

on LAN, assigns IP address 2-11

country/region, configure 2-6

distributed coordinated function, support for 1-4

coverage 2-2

 

Index-2

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

documentation 2-5

4-

I

 

DTIM (Delivery Traffic Indication Message) interval

Infrastructure mode, selecting or changing channels 2-19

6, 4-8

 

 

interference, channel settings 2-16

dual band concurrent, use 1-2

 

 

interference, least 2-16

dynamic encryption key generation, support 1-2

 

 

interference, reduce

2-3, 2-16

dynamic IP address, configure 2-11

 

 

interference, sources

2-2

dynamic per frame rekeying 2-4

 

 

IP address

 

 

 

 

E

 

configure 2-8, 2-13

 

IP settings, configure 2-13

EDCA (Enhanced Distributed Channel Access) 4-9

 

 

 

Ethernet

 

K

RJ-45port1-10

 

keys, use with WEP 2-26

ethernet cable, connect

2-11

 

F

 

 

L

 

 

 

LAN IP address

factory default settings

3-6

default 5-3

reset button

1-9, 5-4

 

 

latency 2-2

 

resetting 5-4

 

 

restore 3-8

 

 

LED indicators, table of 1-8

table A-1

 

 

legacy rates

2-4

firmware

 

 

 

 

line of sight

2-11

upgrade 3-6

 

location 2-2, 2-11

FLASH 3-5

 

 

 

 

log in 2-12

 

fragmentation

4-5

 

 

 

logs 3-11, 3-12

fragmentation length 4-7

 

 

fragmentation threshold 4-5, 4-7 front panel1-7

full-duplex1-4

H

half-duplex1-4

hidden mode, support for 1-3

hotspot

server settings 4-3 support for1-3

wIreless client security separation 2-35

wireless client security separation 2-36, 2-38, 2-39, 2- 41, 2-42, 2-43

HTTP redirect

hotspot settings 4-3

M

MAC address

access control list 2-44

bridge mode wireless station 4-10 wirelesspoint-to-multi-pointbridge4-10

MAC authentication

available wireless stations list 2-45 MAC address database, local2-45 MAC address database, RADIUS2-45 trusted wireless stations2-45

turn access control on 2-45

Management Information Base (MIB) management 1-2

Management VLAN default settings 2-7

max users 1-1

Index-3

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

maximum packet size 4-5, 4-7

multiple access points placement of 2-3

multiple BSSIDs, support for 1-2

multiple input, multiple output (MIMO), support for 1-4

multi-pointbridging extend4-15 extend range4-15

N

NetBIOS name 2-6

Netgear products, compatible 1-5

network authentication, types of legacy 802.1x 2-25

open system 2-25 shared key2-25

WPA and WPA2 with RADIUS 2-25 WPA with RADIUS2-25

WPA2 with RADIUS 2-25 WPA2-PSK2-26 WPA-PSK2-25

WPA-PSKandWPA2-PSK2-26

network key

with WPA-PSKandWPA2-PSK2-43 WPA-PSK2-41

network statistics 3-14 fields3-15

NTP client, configure 2-9 NTP server, configure2-9

O

operating modes, supported point-to-multi-pointbridge.1-3 point-to-pointbridge1-3 wireless access point1-3

P

package contents 1-6

packet fragmentation, support for 1-4 packet size4-5, 4-7

passphrase, use with WEP 2-26, 2-34

password change 3-10

performance degradation causes of 2-2

placement 2-2 PoE switches1-3

point-to-multi-pointbridge4-10 configure4-14

point-to-pointbridge4-10 configure4-13

point-to-pointbridge mode

wireless point-to-multi-pointbridge4-10 power adapter1-10

power consumption 2-2

Power over Ethernet (PoE), support for 1-3 preamble type4-6

preshared key passphrase WPA-PSK2-41

primary DNS server, configure 2-14

profile name

bridge mode wireless station 4-10 wirelesspoint-to-multi-pointbridge4-11

Q

QoS queues 4-9 QoS settings2-21

QoS settings, advanced

AP EDCA parameters 4-9 station EDCA parameters4-9

R

RADIUS and certificate authentication, support 1-2

RADIUS server, configure 2-29 accounting server2-30 authentication server2-30

RADIUS server, configure first 2-23, 2-31

range 1-1 guidelines2-2

rear panel 1-9 reboot3-9

Index-4

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

reset button, using 5-4

rebooting

losing previous state 3-17 reception2-2

redirect HTTP 4-3

redirect URL

hotspot settings 4-4

reduced inter frame spacing, support for 1-4

remote console

secure shell (SSH) 3-3 Telnet3-3

request to send threshold 4-5 reset button3-9

reset to factory defaults 3-9 retransmission1-4

RIFS

wireless settings 4-6

RIFS (Reduced Interframe Space) transmission 4-8

roaming

multiple wireless access points 3-16 roaming on same subnet, support for1-4

rogue AP detection configure 3-17

import rogue AP list from file 3-18 support for1-3

unknown AP list 3-18

rogue AP list 3-19

unknown AP list 3-19, 3-21 RTS4-5

RTS threshold 4-7

RTS/CTS handshake, support for 1-4

S

secure Telnet CLI, support for 1-3 secure Telnet client3-3

secure Telnet interface, using 3-3

security profile

VLAN ID 1-4, 2-33

security profile definition authentication settings 2-25

broadcast wireless network name (SSID) 2-25 data encryption2-26

security profile name 2-24 VLAN ID2-27

wireless client security separation 2-27 wireless network name (SSID)2-24

security profile settings testing connectivity 2-22

security profile, support for 1-3

security profiles about 2-23

security profiles, setting up 2-31

security profiloe

wireless client security separation 2-33 serial console port, connectors1-10

Service Set Identifier (SSID) max per radio mode 1-2

setup form 2-27

SNMP

enable SNMP 3-2

read-onlycommunity name3-2 read-writecommunity name3-2 receive traps IP address3-2 remote management3-1

trap community name 3-2 trap port3-2

SNMP (Simple Network Management Protocol ), support 1-2

software upgrade 3-5

Spanning Tree Protocol enabling 2-6

SSID 2-16, 2-18 hidden mode 1-3

SSID broadcast, disable 2-25

SSID match

verify connectivity 2-11

SSID, wireless network name 2-24 standards, supported1-2

static IP address 5-3 default2-5

statistics 3-14 subnet mask

Index-5

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

default 5-3

 

upgradeable firmware, support for 1-3

support documentation 2-5

V

syslog server

 

setup 3-11

 

VLAN (802.1Q) 2-33

system information

3-12

VLAN ID

fields 3-13

 

 

DHCP server 4-2

system requirements

1-6

VLAN security profiles (VLAN ID), support for 1-4

 

 

T

Voice-over-IP(VoIP)4-8

technical specifications A-3

Telnet client recommendations 3-3

Telnet options 3-3

terminal-emulationprogram, configure3-4 throughput performance2-2

timezone, configure 2-7, 2-9 timezone, default2-9

TKIP

data rates, provided by 2-4 with WPA, with RADIUS2-36 withWPA-PSK2-41

TKIP+AES

with WPA and WPA2, with RADIUS 2-39 withWPA-PSK+WPA2-PSK2-43

transmit power 2-17, 2-20 Trap3-2

troubleshooting 5-1

access point, connecting to 5-3 configuring,5-3

LAN activity 5-2 power connection5-1 timeout error5-3

wireless Internet connection 5-2 wireless LAN activity l5-2

trusted wireless stations list MAC authentication 2-45

U

unauthorized access, secure from 2-1

untagged VLAN default settings 2-7

W

WEP

data rates, provided by 2-4

WEP, configure

data encryption keys 2-34 data encryption strength2-34

network authentication type 2-33 wireless client security separation2-35

Wi-FiMultimedia (WMM)4-8 Wi-FiProtected Access (WPA)2-4 wired equivalent privacy (WEP)2-4

wireless access point software 3-5

wireless access point name 2-11

wireless adapter

verifying connectivity 2-11 wireless adapter, settings2-23

wireless adapters

WPA support, restriction 2-35 WPA2 support, restriction2-37

wireless bridging and repeating 4-10

wireless channel changing 2-16, 2-22

wireless client security separation hotspot setting 2-35

wireless computer, configuring from 2-35

wireless connection losing 2-44

wireless connection, losing 2-23 wireless connectivity, testing2-22 Wireless Multimedia (WMM)2-21

Index-6

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

Wireless Multimedia (WMM), support for 1-4 Wireless Multimedia Extension (WME)4-8 wireless network name (SSID)2-32

wireless point-to-multi-pointbridge4-10 wirelesspoint-to-pointbridge4-10

wireless security options

restrict access based on MAC address. 2-3

turn off broadcast of wireless network name (SSID)

2-4

WEP, use 2-4

WPA or WPA-PSK,use2-4

wireless settings 802.11a/na

broadcast wireless network name (SSID) 2-19 channel width2-20

channel/frequency 2-19 guard interval2-20

MCS index/data rate 2-19 output power2-20

turn radio on 2-18 wireless mode2-18

wireless network name (SSID) 2-18

wireless settings 802.11a/na, advanced aggregation length 4-8

A-MPDU4-8 beacon interval4-7 DTIM interval4-8

fragmentation length 4-7 RIFS transmission4-8 RTS threshold4-7

wireless settings 802.11b/bg/ng, advanced aggregation length 4-6

A-MPDU4-6 antenna4-6 beacon interval4-5 DTIM interval4-6

fragmentation length 4-5 preamble type4-6

RIFS transmission 4-6 RTS threshold4-5

wireless settings 802.11bgn

broadcast wireless network name (SSID) 2-16 channel width2-17

channel/frequency 2-16 guard interval2-17

MCS index/data rate 2-17

output power 2-17 turn radio on2-16 wireless mode2-15

wireless network name (SSID) 2-16 wireless settings, basic2-10

wireless sniffer 2-4, 2-19

WPA and WPA2 with RADIUS restiction with WPA and WPA2 2-38

WPA and WPA2 with RADIUS, configure 2-39 data encryption2-39

network authentication type 2-39 wireless client security separation2-39

WPA preshared key passphrase, use with WPA-PSK2- 27

WPA with RADIUS, configure 2-35 data encription default2-36 network authentication type2-36

wireless client security separation 2-36 WPA with RADIUS, restrictions2-35

WPA/WPA2

use restrictions 2-25 WPA/WPA2, support for1-2

WPA2 with RADIUS, configure 2-37 data encryption default2-38 network authentication type2-38

wireless client security separation 2-38

WPA2-PSK,configure data encryption2-42

network authentication type 2-42 preshared key passphrase2-42 restrictions using WPA22-41 wireless client security separation2-42

WPA-PSKandWPA2-PSKpreshared key authentication, support1-2

WPA-PSKandWPA2-PSK,configure data encryption2-43

network authentication setting 2-43 restrictions using WPA/WPA22-42 wireless client security separation2-43 WPA passphrase (network key)2-43

WPA-PSK,configure data encryption2-41

network authentication type 2-41 preshared key passphrase2-41

Index-7

v1.1, November 2009

ProSafe Dual Band Wireless-NAccess Point WNDAP350 Reference Manual

restrictions for WPA 2-40

wireless client security separation 2-41

Index-8

v1.1, November 2009