Loading...
User Manual
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with
(2 SFP Ports and) Cloud Management
Models
GS108Tv3 GS110TPv3
|
NETGEAR, Inc. |
May 2019 |
350 East Plumeria Drive |
202-11935-01 |
San Jose, CA 95134, USA |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Support
Thank you for purchasing this NETGEAR product. You can visit https://www.netgear.com/support/ to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources
Compliance and Conformity
For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Do not use this device outdoors. If you connect cables or devices that are outdoors to this device, see http://kb.netgear.com/000057103 for safety and warranty information.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
Revision History
Publication Part Number |
Publish Date |
Comments |
|
|
|
202-11935-01 |
May 2019 |
First publication |
|
|
|
2 |
User Manual |
Contents
Chapter 1 Get Started
Available publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Options to manage the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Options to discover the switch IP address in the network . . . . . . . . . . . . . . 14 Options to change the default IP address of the switch. . . . . . . . . . . . . . . . 14 Discover or change the switch IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Discover the switch in a network With a DHCP server
using the Smart Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Discover the switch in a network without a DHCP server
using the Smart Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Use the NETGEAR Switch Discovery Tool to discover the switch . . . . .18 Use the NETGEAR Insight mobile app to discover and
|register the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Configure a static IP address from a directly connected computer . . .20
Manage the switch by using the local browser interface . . . . . . . . . . . . . . . 21
Software requirements for the local browser interface . . . . . . . . . . . . . .22 Supported web browsers for the local browser interface . . . . . . . . . . .22 Access the local browser interface for the initial online
log-in procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Navigation tabs, configuration menus, and page menu. . . . . . . . . . . . .25 Configuration and status options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Buttons in the local browser interface . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 User-defined fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Context-sensitive help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Change the language of the local browser interface . . . . . . . . . . . . . . . . . . 27 Change the management mode of the switch . . . . . . . . . . . . . . . . . . . . . . . 28
About changing the management mode . . . . . . . . . . . . . . . . . . . . . . . . .28 Change the management mode to NETGEAR Insight
Mobile App and Insight Cloud Portal. . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Change the management mode back to Directly Connect
to Web-browser Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Access the switch offline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Access the switch offline if your network is not connected
to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Access the switch offline if your computer is connected
directly to the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Use the Device View of the local browser interface . . . . . . . . . . . . . . . . . . . 33
Power LED in the Device View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 PoE Max LED in the Device View (model GS110TPv3) . . . . . . . . . . . . . .36
Configure interface settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Access the NETGEAR support website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Access the user manual online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Chapter 2 Configure System Information
View or define system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 View the software versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 View the system CPU status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Configure the CPU thresholds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Configure the IP network settings for management access . . . . . . . . . . . . 50
Configure the IPv4 network and VLAN settings for the
local browser interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Configure the IPv6 network settings for the local browser
interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 View the IPv6 network neighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Configure the time settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Configure the time settings manually . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Configure the time settings with SNTP and configure the
global SNTP settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 View the SNTP global status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Configure an SNTP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Configure daylight saving time settings . . . . . . . . . . . . . . . . . . . . . . . . . .66 View the daylight saving time status . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Configure denial of service settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Configure Auto-DoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Configure denial of service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Configure DNS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Configure the global DNS settings and add a DNS server. . . . . . . . . . .74 Remove a DNS server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Configure and view host name-to-IP address information . . . . . . . . . . .77
Configure green Ethernet settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Configure the global green Ethernet settings . . . . . . . . . . . . . . . . . . . . .80 Configure green Ethernet interface settings. . . . . . . . . . . . . . . . . . . . . . .81
Use the Device View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Configure Power over Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Configure the global PoE settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Configure the PoE port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Configure SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Configure the SNMPv1 and SNMPv2 community . . . . . . . . . . . . . . . . . .88 Configure SNMPv1 and SNMPv2 trap settings. . . . . . . . . . . . . . . . . . . . .91 Configure SNMPv1 and SNMPv2 trap flags . . . . . . . . . . . . . . . . . . . . . . .94 View the supported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Configure SNMPv3 users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Configure LLDP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Configure LLDP global settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Configure LLDP port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 View the LLDP-MED network policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Configure the LLDP-MED port settings . . . . . . . . . . . . . . . . . . . . . . . . . 102 View the local information advertised through LLDP . . . . . . . . . . . . . 103
4 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
View the LLDP neighbors information . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Configure DHCP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Configure the global DHCP snooping settings . . . . . . . . . . . . . . . . . . 110
Enable DHCP for all member interfaces of a VLAN . . . . . . . . . . . . . . . 111
Configure DHCP snooping interface settings. . . . . . . . . . . . . . . . . . . . 112
Configure static DHCP bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Configure DHCP snooping persistent settings. . . . . . . . . . . . . . . . . . . 115
View or clear DHCP snooping statistics . . . . . . . . . . . . . . . . . . . . . . . . . 117
Set up PoE timer schedules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Create a PoE timer schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Specify the settings for an absolute PoE timer schedule . . . . . . . . . . 119
Specify the settings for a recurring PoE timer schedule . . . . . . . . . . . 120
Change the settings for a recurring PoE timer schedule entry . . . . . 122
Delete a PoE timer schedule entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Delete a PoE timer schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Chapter 3 Configure Switching
Configure the port settings and maximum frame size. . . . . . . . . . . . . . . 127
Configure link aggregation groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Configure LAG settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Configure LAG membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Set the LACP system priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Set the LACP port priority settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Configure VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Configure VLAN settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Configure VLAN membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
View the VLAN status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Configure the PVID settings for an interface. . . . . . . . . . . . . . . . . . . . . 143
Configure a MAC-based VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Configure protocol-based VLAN groups. . . . . . . . . . . . . . . . . . . . . . . . 148
Configure protocol-based VLAN group membership. . . . . . . . . . . . . 149
Configure a voice VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Configure the GARP switch settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Configure GARP ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Configure Auto-VoIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
Configure protocol-based port settings for VoIP . . . . . . . . . . . . . . . . . 156
Configure Auto-VoIP OUI-based properties . . . . . . . . . . . . . . . . . . . . . 157
Configure the OUI-based port settings . . . . . . . . . . . . . . . . . . . . . . . . . 158
Manage the OUI table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Display the Auto-VoIP status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Configure Spanning Tree Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
Configure the STP settings and view the STP status . . . . . . . . . . . . . . 163
Configure the CST settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Configure the CST port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
View the CST port status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
View the Rapid STP information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Manage the MST settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Configure and view the port settings for an MST instance . . . . . . . . . 176
5 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
View the STP statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Configure multicast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
View, search, or Clear the MFDB table. . . . . . . . . . . . . . . . . . . . . . . . . . 180
View the MFDB statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Configure the auto-video multicast settings . . . . . . . . . . . . . . . . . . . . . 183
Manage IGMP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Configure IGMP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Configure IGMP snooping for interfaces. . . . . . . . . . . . . . . . . . . . . . . . 186
View, search, or clear the IGMP snooping table. . . . . . . . . . . . . . . . . . 188
Configure IGMP snooping for VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Modify IGMP snooping settings for a VLAN . . . . . . . . . . . . . . . . . . . . . 191
Disable IGMP snooping on a VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Configure one or more IGMP multicast router interfaces. . . . . . . . . . 192
Configure an IGMP multicast router VLAN . . . . . . . . . . . . . . . . . . . . . . 194
IGMP snooping querier overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Configure an IGMP snooping querier . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Configure an IGMP snooping querier for VLANs. . . . . . . . . . . . . . . . . 196
Display the status of the IGMP snooping querier for VLANs . . . . . . . 197
Manage MLD snooping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199
Enable MLD snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Configure MLD snooping for interfaces . . . . . . . . . . . . . . . . . . . . . . . . 201
Configure the MLD VLAN settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Modify the MLD snooping settings for a VLAN . . . . . . . . . . . . . . . . . . 204
Remove MLD snooping From a VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Configure one or more MLD multicast router interfaces . . . . . . . . . . 205
Configure an MLD multicast router VLAN . . . . . . . . . . . . . . . . . . . . . . . 206
Configure an MLD snooping querier . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Configure the MLD snooping querier VLAN settings . . . . . . . . . . . . . 209
View, search, and manage the MAC address table. . . . . . . . . . . . . . . . . . .210
View, search, or clear the MAC address table . . . . . . . . . . . . . . . . . . . 211
Set the dynamic address aging interval. . . . . . . . . . . . . . . . . . . . . . . . . 212
Add a static MAC address to the MAC address table . . . . . . . . . . . . . 213
Configure Layer 2 loop protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
Configure global Layer 2 loop protection. . . . . . . . . . . . . . . . . . . . . . . 215
View and configure Layer 2 loop protection on a port . . . . . . . . . . . . 216
Chapter 4 Configure Routing
Routing concepts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Configure the routing mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Configure the router settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
View the IP routing statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Configure VLAN routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
Create a routing interface with the VLAN Static Routing Wizard . . . . 226
Manage a VLAN routing interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Delete a VLAN routing interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Configure router discovery for a VLAN routing interface. . . . . . . . . . . . . .230
Manage routes and view the routing table. . . . . . . . . . . . . . . . . . . . . . . . . .231
6 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Manually add a route and view the routing table . . . . . . . . . . . . . . . . 232
Modify a route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Delete a route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Configure Address Resolution Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . .236
View the ARP cache. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Manually add an entry to the ARP table. . . . . . . . . . . . . . . . . . . . . . . . . 238
View or globally configure the ARP table . . . . . . . . . . . . . . . . . . . . . . . 239
Remove ARP entries from the ARP cache . . . . . . . . . . . . . . . . . . . . . . . 240
Chapter 5 Configure Quality of Service
Quality of Service concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
Manage the Class of Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243
CoS configuration concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
Configure the global CoS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Configure the CoS settings for an interface . . . . . . . . . . . . . . . . . . . . . 245
Configure the CoS queue settings for an interface . . . . . . . . . . . . . . . 247
Map 802.1p priorities to queues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Map DSCP values to queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Manage Differentiated Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251
Defining DiffServ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Configure the DiffServ mode and display the entries in the
DiffServ private MIB tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Configure a DiffServ class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Configure DiffServ IPv6 class settings . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Configure a DiffServ policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Configure the DiffServ service interface . . . . . . . . . . . . . . . . . . . . . . . . 271
View DiffServ service statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Chapter 6 Manage Device Security
Change the local login password for the
local browser interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Manage the RADIUS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279
Configure a RADIUS authentication server on the switch. . . . . . . . . . 281 Configure a RADIUS accounting server. . . . . . . . . . . . . . . . . . . . . . . . . 285
Configure the TACACS+ settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288
Configure the global TACACS+ settings . . . . . . . . . . . . . . . . . . . . . . . . 289 Configure a TACACS+ server on the switch . . . . . . . . . . . . . . . . . . . . . 290 Modify the settings for a TACACS+ server on the switch . . . . . . . . . . 291 Remove a TACACS+ server from the switch . . . . . . . . . . . . . . . . . . . . . 292
Configure authentication lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293
Configure an HTTP authentication list . . . . . . . . . . . . . . . . . . . . . . . . . . 293 Configure an HTTPS authentication list . . . . . . . . . . . . . . . . . . . . . . . . . 294 Configure the dot1x authentication list . . . . . . . . . . . . . . . . . . . . . . . . . 296
Manage the Smart Control Center Utility . . . . . . . . . . . . . . . . . . . . . . . . . . .297 Configure management access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298
Configure HTTP access settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298 Configure HTTPS access settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
7 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Manage certificates for HTTPS access . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Control access with profiles and rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305
Add an access profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305 Add a rule to the access profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 Activate the access profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308 Display the access profile summary and the number of
filtered packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Deactivate an access profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Remove an access profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
Configure port authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312
Configure the global 802.1X settings . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Manage port authentication on individual ports . . . . . . . . . . . . . . . . . 314 View the port summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 View the client summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Set up traffic control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322
Manage MAC filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 View the MAC filter summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Configure storm control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 Manage port security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Configure protected ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Configure access control lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .335
Use the ACL Wizard to create a simple ACL . . . . . . . . . . . . . . . . . . . . . 335 Configure a MAC ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Configure MAC ACL rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345 Configure MAC bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349 View or delete MAC ACL bindings in the MAC binding table . . . . . . 351 Configure a basic or extended IPv4 ACL. . . . . . . . . . . . . . . . . . . . . . . . 352 Configure rules for a basic IPv4 ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Configure rules for an extended IPv4 ACL . . . . . . . . . . . . . . . . . . . . . . 360 Configure an IPv6 ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367 Configure IPv6 rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371 Configure IP ACL interface bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . 378 View or delete IP ACL bindings in the IP ACL binding table . . . . . . . 380 Configure VLAN ACL bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
Chapter 7 Monitor the System
Monitor the switch and the ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385
View switch statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385
View port statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
View and manage detailed port statistics . . . . . . . . . . . . . . . . . . . . . . . 391
View or clear EAP and EAPoL statistics . . . . . . . . . . . . . . . . . . . . . . . . . 397
Perform a cable test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Configure and view the logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .401
Manage and view the memory log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Manage and view the flash log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
Manage the server log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
View or clear the trap logs and the counters . . . . . . . . . . . . . . . . . . . . 408
8 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Configure port mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .409
Chapter 8 Maintain or Troubleshoot the Switch
Reboot the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413
Reset the switch to its factory default settings . . . . . . . . . . . . . . . . . . . . . . .414 Export a file from the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .415
Use TFTP to export a file from the switch to a TFTP server . . . . . . . . . 415 Use HTTP to export a file from the switch to a computer . . . . . . . . . . 417
Download a file to the switch or update the software . . . . . . . . . . . . . . . .418
Use TFTP to download a file to the switch or update the
software image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418 Use HTTP to download a file to the switch or update the
software image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 Manage software images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 Copy a software image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 Configure dual image settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 View the dual image status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
Perform diagnostics and troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .427
Ping an IPv4 address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427 Ping an IPv6 address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 Send an IPv4 traceroute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Send an IPv6 traceroute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Enable remote diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
Appendix A Configuration Examples
Virtual Local Area Networks (VLANs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 VLAN configuration examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
Access control lists (ACLs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .440
MAC ACL sample configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 Basic IPv4 ACL sample configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . 441
Differentiated Services (DiffServ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .442
Class. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443 DiffServ traffic classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 Create policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 DiffServ example configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445
802.1X access control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .446
802.1X example configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448
Multiple Spanning Tree Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .449
MSTP example configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451 VLAN routing interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
Appendix B Specifications and Default Settings
Switch default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
General feature default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .457 System setup and maintenance settings . . . . . . . . . . . . . . . . . . . . . . . . . . .464 Port characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .464
9 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Traffic control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .465 Quality of Service settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .465 Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .466 System management settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .466 Settings for other features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467 Hardware technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467
10 |
User Manual |
1
1Get Started
This user manual describes how you can configure and operate the NETGEAR 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management by using the local browser–based management interface.
The manual describes the software configuration procedures and explains the options that are available within those procedures for the following models:
•GS108Tv3. NETGEAR 8-Port Gigabit Ethernet Smart Managed Pro Switch with Cloud Management
•GS110TPv3. NETGEAR 8-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management
IMPORTANT:
For the initial log-in process, also called single sign-on (SSO), you must connect the switch to the Internet and log in with a NETGEAR account. (You can create an account during the log-in process.)
The chapter contains the following sections:
•Available publications
•Options to manage the switch
•Options to discover the switch IP address in the network
•Options to change the default IP address of the switch
•Discover or change the switch IP address
•Manage the switch by using the local browser interface
•Change the language of the local browser interface
•Change the management mode of the switch
•Access the switch offline
•Use the Device View of the local browser interface
•Configure interface settings
•Access the NETGEAR support website
•Access the user manual online
11
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Note: In this manual, the local browser–based management interface is referred to as the local browser interface.
Note: For more information about the topics covered in this manual, visit the support website at netgear.com/support.
Note: Firmware updates with new features and bug fixes are made available from time to time at netgear.com/support/download/. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, you might need to update your firmware.
Available publications
The following guides are available at netgear.com/support/download/:
•Installation Guide
•Hardware Installation Guide
For information about the NETGEAR Insight app and Insight Cloud portal, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support.
Get Started |
12 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Options to manage the switch
If you prefer, you can use the switch as a plug-and-play device, so you do not need to set up a custom configuration. Just connect power, connect to your network and to your other devices, and you’re done.
The switch provides administrative management options that let you configure, monitor, and control the network. The local browser interface is enabled by default, allowing you to configure the switch and the network from a web browser. You can also choose to manage the switch by using the NETGEAR Insight app on a smartphone or tablet. Or, if you are an Insight Premium or Pro subscriber, you can choose to manage the switch from the Insight Cloud portal that is available from a web browser on your Windows-based computer, Mac, or tablet.
The switch provides the following management options that let you discover the switch on the network and configure, monitor, and control the switch:
•Local browser interface. By default, the management mode of the switch is set to Directly Connect to Web Browser Interface, which lets you access the local browser interface. In this mode, you can change all settings of the switch.
•NETGEAR Insight app and Insight Cloud portal. If you set the management mode of the switch to NETGEAR Insight Mobile App and Insight Cloud Portal, you can use the following applications to manage the switch remotely:
-NETGEAR Insight app. With the NETGEAR Insight app, you can discover the switch on the network and add the switch to the NETGEAR Insight app so that you can set up the switch in the network and manage and monitor the switch remotely from your smartphone or tablet. You can choose from four methods to add the switch to the NETGEAR Insight app: You can scan your network for the switch, scan the QR code or the barcode of the switch, or add the serial number of the switch.
-Insight Cloud portal. As an Insight Premium or Insight Pro subscriber, you can use the NETGEAR Insight Cloud portal to set up the switch in the network, perform advanced remote setup, configuration, and management, monitor the switch, analyze the switch and network usage, and, if necessary, troubleshoot the switch and the network.
For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support.
To use the NETGEAR Insight app or Insight Cloud portal methods, you must change the management method to NETGEAR Insight Mobile App and Insight Cloud Portal. You can also change the management method back to Directly Connect to Web Browser Interface and use the local browser interface. For more information, see Change the management mode of the switch on page 28.
Get Started |
13 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Options to discover the switch IP address in the network
Before you start the initial log-in process, you can discover the switch (that is, its IP address) on the network by using one of the following tools:
•NETGEAR Smart Control Center (SCC). The SCC runs on a Windows-based computer. For information about the SCC, visit https://www.netgear.com/support/product/SCC. For more information about how you can use the SCC, see one of the following sections:
•Discover the switch in a network With a DHCP server using the Smart Control Center on page 15
•Discover the switch in a network without a DHCP server using the Smart Control Center on page 16
•NETGEAR Switch Discovery Tool (SDT). If you use a Mac or a 64-bit Windows-based computer, you can use the SDT to discover the switch on your network. For more information about the SDT, Use the NETGEAR Switch Discovery Tool to discover the switch on page 18.
•NETGEAR Insight mobile app. You can install the NETGEAR Insight mobile app on an iOS or Android mobile device and discover the IP address of the switch. For more information about the Insight mobile app, see Use the NETGEAR Insight mobile app to discover and |register the switch on page 19.
You can also get the IP address of the switch from the DHCP server in the network or use an IP scanner utility.
After discovery, you can configure the switch using the local browser interface for configuration of all features, the SCC for configuration of a limited number of features, or you can change the management mode so that you can use the NETGEAR Insight app and Insight Cloud Portal to manage the switch remotely.
Options to change the default IP address of the switch
To change the IP address settings of the switch, connect the switch to the network and specify an IP address, subnet mask, and default gateway. The switch default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0.
Get Started |
14 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
To change the default IP address of the switch, use one of the following methods:
•Dynamic assignment through DHCP. DHCP is enabled on the switch by default. If you connect the switch to a network with a DHCP server (most routers functions as a DHCP server), the switch obtains its network information automatically. You can use the Smart Control Center (SCC) to discover the automatically assigned network information. For more information, see Discover the switch in a network With a DHCP server using the Smart Control Center on page 15.
•Static assignment through the SCC. If you connect the switch to a network that does not include a DHCP server (most routers functions as a DHCP server), you can use the SCC to assign a static IP address, subnet mask, and default gateway. For more information, see Discover the switch in a network without a DHCP server using the Smart Control Center on page 16.
•Static assignment by connecting from a computer. You can connect to the switch from a computer in the 192.168.0.0/24 network and use the local browser interface of the switch to assign a static IP address. For information, see Configure a static IP address from a directly connected computer on page 20.
Discover or change the switch IP address
The following sections describe methods that let you discover or change the IP address of the switch.
Discover the switch in a network With a DHCP server using the Smart Control Center
This section describes how to set up your switch in a network that includes a DHCP server. The DHCP client on the switch is enabled by default. When you connect the switch to your network, the DHCP server automatically assigns an IP address to the switch. Use the Smart Control Center (SCC) to discover the IP address automatically assigned to the switch.
For information about the SCC, visit https://www.netgear.com/support/product/SCC.
To install the switch in a network with a DHCP server:
1.Connect the switch to a network with a DHCP server.
2.Power on the switch by connecting its power cord.
3.Install the SCC on your computer.
4.Start the SCC.
5.Click the Discover button for the SCC to discover all the devices in the subnet.
Get Started |
15 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
6.Make a note of the displayed IP address assigned by the DHCP server.
You can this use IP address later to access the switch directly from a web browser (that is, without using the SCC).
Note: After you complete the initial log-in process (see Access the local browser interface for the initial online log-in procedure on
page 22), you can access the local browser interface from the SCC by selecting your switch in the SCC and clicking the
Web Browser Access button.
Discover the switch in a network without a DHCP server using the Smart Control Center
This section describes how to use the Smart Control Center (SCC) to set up your switch in a network without a DHCP server. If your network does not include a DHCP service, you must assign a static IP address to your switch.
If you prefer, you can assign the switch a static IP address even if your network does include a DHCP server.
As an offline option, if you connect your computer directly to the switch using an Ethernet cable (that is, offline), you can also use the SCC to assign a static IP address to your switch. After you do so, you can connect your switch to the network.
For more information about the SCC, see the SCC user manual, which you can download from netgear.com/support/download/.
Get Started |
16 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
To assign a static IP address:
1.Connect the switch to your existing network or directly to your computer using an Ethernet cable.
Note: If you connect your computer directly to the switch using an Ethernet cable, the IP address settings of your computer do not need to be in the same IP subnet as the switch. The SCC can detect the IP address settings of the switch even if they are in a different subnet.
2.Power on the switch by connecting its power cord.
3.Install the SCC on your computer.
4.Start the SCC.
5.Click the Discover button for the SCC to find your switch.
The utility broadcasts Layer 2 discovery packets within the broadcast domain to discover the switch.
6.Select the switch, and then click the Configure Device button. The page expands to display additional fields at the bottom.
7.Select the Disabled radio button. DHCP is disabled.
8.Enter the static switch IP address, gateway IP address, and subnet mask for the switch.
9. Type your password to continue with the configuration change.
Tip: You must enter the current local password each time that you use the SCC to update the switch settings. The default local password is password.
10.Click the Apply button. Your settings are saved.
Get Started |
17 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Use the NETGEAR Switch Discovery Tool to discover the switch
For easiest access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses, power on the switch, and then use a computer that is connected to the same network as the switch.
The NETGEAR Switch Discovery Tool lets you discover the switch in your network and access the local browser interface of the switch from a Mac or a 64-bit Windows-based computer.
To install the NETGEAR Switch Discovery Tool and discover the switch in your network:
1.Download the Switch Discovery Tool by visiting netgear.com/support/product/netgear-switch-discovery-tool.aspx.
Depending on the computer that you are using, download either the Mac version or the version for a 64-bit Windows-based computer.
2.Temporarily disable the firewall, Internet security, antivirus programs, or all of these on the computer that you use to configure the switch.
3.Unzip the Switch Discovery Tool files, double-click the .exe or .dmg file (for example,
NETGEAR+Switch+Discovery+Tool+Setup+1.2.101.exe or
NetgearSDT-V1.2.101.dmg), and install the program on your computer.
The installation process places a NETGEAR Switch Discovery Tool icon on your desktop.
4.Reenable the security services on your computer.
5.Power on the switch.
The DHCP server assigns the switch an IP address.
6.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection. The computer and the switch must be on the same Layer 2 network.
7.Open the Switch Discovery Tool.
To open the program, double-click the NETGEAR Switch Discovery Tool icon on your desktop.
The initial page displays a menu and a button.
8.From the Choose a connection menu, select the network connection that allows the Switch Discovery Tool to access the switch.
9.Click the Start Searching button.
The Switch Discovery Tool displays a list of Smart Managed Plus Switches that it discovers on the selected network.
For each switch, the tool displays the IP address.
Get Started |
18 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Use the NETGEAR Insight mobile app to discover and |register the switch
If the switch is connected to a WiFi router or access point, and the switch is connected to the Internet, the NETGEAR Insight mobile app lets you discover the switch in your network, register the switch with NETGEAR, activate your warranty, and access support.
To use the NETGEAR Insight mobile app to discover the switch in your network and register the switch with NETGEAR:
1.On your iOS or Android mobile device, go to the app store, search for NETGEAR Insight, download the latest version of the app, and install the app.
2.Connect your mobile device to the WiFi network of the WiFi router or access point to which the switch is connected.
3.Open the NETGEAR Insight mobile app.
4.If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.
5.Enter the email address and password for your account and tap LOG IN.
After you log in to your account, the IP address of the switch displays in the device list.
6.Write down the IP address for future use.
7.Tap + in the upper-right corner.
8.Either use the camera on your phone to scan the serial number bar code located on the bottom of the switch, or enter the serial number.
9.Tap Go.
10.Follow the onscreen instructions to add your switch to a network location. The switch is registered and added to your account.
Note: To manage the switch from the Insight mobile app or the Insight Cloud Portal, you first must change the management mode (see Change the management mode of the switch on page 28).
Get Started |
19 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Configure a static IP address from a directly connected computer
You can change the IP address of the switch by connecting an Ethernet cable from a computer to the switch.The IP address of the computer must be in the same subnet as the default IP address on the switch. For most networks, this means that you must change the IP address of the computer to be on the same subnet as the default IP address of the switch (192.168.0.239).
To configure a static IP address on the switch:
1.Change the IP settings of your computer to be in the same subnet as the IP settings of the switch.
If the DHCP client of the switch is enabled and you remove the switch from the network with the DHCP server, the IP address reverts to the default IP address of 192.168.0.239 with a subnet of 255.255.255.0.
Note: If you already disabled the DHCP client and assigned a static IP address to the switch, change the IP settings of your computer to be in the same subnet as the static IP address.
For more information about changing the IP settings on your computer, see one of the following knowledge base articles at the NETGEAR website:
•Windows-based computer. See the following article: https://kb.netgear.com/27476/How-to-set-a-static-IP-address-in-Windows
•Mac. See the following article: https://kb.netgear.com/000037250/Setting-a-static-IP-address-on-your-network-a dapter-in-Mac-OS-for-direct-access-to-an-access-point
(The Mac article is written for an access point but is also valid for a switch.)
2.Connect your computer to the switch using an Ethernet cable.
3.Power on the switch by connecting its power cord.
4.Launch a web browser.
5.In the address field of your web browser, enter the IP address of the switch. The NETGEAR Business page displays.
6.If the browser does not display the NETGEAR Business page, your browser might display a security message and might not let you proceed until you complete one of the following tasks, depending on which browser you use:
•Google Chrome. If Google Chrome displays a Your connection is not private message, click the ADVANCED link. Then, click the Proceed to x.x.x.x (unsafe) link, in which x.x.x.x represents the IP address of the switch, and install a security certificate.
•Apple Safari. If Apple Safari displays a This connection is not private message, click the Show Details button. Then, click the visit this website link. If a warning pop-up
Get Started |
20 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
window opens, click the Visit Website button. If another pop-up window opens to let you confirm changes to your certificate trust settings, enter your Mac user name and password and click the Update Setting button.
•Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message, click the ADVANCED button. Then, click the Add Exception button. In the pop-up window that opens, click the Confirm Security Exception button and install a security certificate.
•Microsoft Internet Explorer. If Microsoft Internet Explorer displays a There is a problem with this website’s security certificate message, click the Continue to this website (not recommended) link and install a security certificate.
•Microsoft Edge. If Microsoft Edge displays a There is a problem with this website’s security certificate message or a similar warning, select Details > Go on to the webpage and install a security certificate.Make sure that the switch is connected to the Internet.
7.In the Password field, enter the current local password.
If you did not change the local password, use the default local password, which is password.
8.Click the Login button.
The System Information page of the switch displays.
9.Select System > Management > IP Configuration. The IP Configuration page displays.
10.Select the Static IP Address radio button.
11.Configure the IP address, subnet mask, and default gateway to be assigned to the switch.
12.Click the Apply button. Your settings are saved.
13.Disconnect the Ethernet cable and return the network configuration on your computer to the original settings.
Manage the switch by using the local browser interface
This manual describes how to use the local browser interface to manage and monitor the switch.
For information about using the NETGEAR Insight app and Insight Cloud porta to manage the switch, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support.
Get Started |
21 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Software requirements for the local browser interface
To access the switch by using a web browser, the browser must meet the following software requirements:
•HTML version 4.0, or later
•HTTP version 1.1, or later
Supported web browsers for the local browser interface
The following browsers were tested and support the local browser interface. Later browser versions might function fine but were not tested. The supported web browsers include the following:
•Microsoft Internet Explorer (IE) version 11
•Microsoft Edge
•Mozilla Firefox version 50
•Chrome version 51
•Safari on Windows OS versions 5.1
•Safari on MAC OS X version 10.1
Access the local browser interface for the initial online log-in procedure
For the initial online log-in process, also referred to as single sign-on (SSO), the following are required:
•The switch must be connected to the Internet through an existing router in your network.
•You must know (or be able to ping) the IP address of the switch from your computer for web access to be available.
If you do not know the IP address of the switch, see Discover or change the switch IP address on page 15.
If you used the Smart Control Center to set up the IP address and subnet mask, either with or without a DHCP server, use that IP address in the address field of your web browser.
•You must log in with a NETGEAR account. If you do not own a free NETGEAR account, you can create one during the initial log-in process.
You can use one of the following methods to access the switch local browser interface:
•From the Smart Control Center, select the switch and click the Web Browser Access button.
•From the Switch Discovery Tool, select the switch and click the ADMIN PAGE button.
Get Started |
22 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
•Open a web browser and enter the IP address of the switch in the address field.
If you use any of these methods and you log in for the first time to the local browser interface, the NETGEAR Log In page displays.
To access the switch local browser interface from a web browser for the first time:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or change the switch IP address on page 15.
The NETGEAR Business page displays the switch model.
4.If the browser does not display the NETGEAR Business page, do the following:
•Your browser might display a security message and might not let you proceed. Consider the following examples:
-Google Chrome. If Google Chrome displays a Your connection is not private message, click the ADVANCED link. Then, click the Proceed to x.x.x.x (unsafe) link, in which x.x.x.x represents the IP address of the switch, and install a security certificate.
-Apple Safari. If Apple Safari displays a This connection is not private message, click the Show Details button. Then, click the visit this website link. If a warning pop-up window opens, click the Visit Website button. If another pop-up window opens to let you confirm changes to your certificate trust settings, enter your Mac user name and password and click the Update Setting button.
-Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message, click the ADVANCED button. Then, click the Add Exception button. In the pop-up window that opens, click the Confirm Security Exception button and install a security certificate.
-Microsoft Internet Explorer. If Microsoft Internet Explorer displays a There is a problem with this website’s security certificate message, click the Continue to this website (not recommended) link and install a security certificate.
-Microsoft Edge. If Microsoft Edge displays a There is a problem with this website’s security certificate message or a similar warning, select Details > Go on to the webpage and install a security certificate.Make sure that the switch is connected to the Internet.
•If you use a wired Ethernet connection, make sure that the computer is connected to the same network that the switch is attached to or directly to one of the LAN Ethernet ports of the switch.
•If you use a mobile device, make sure that mobile device is connected to an access point that is attached to the same network that the switch is connected to or that the access point is directly attached to one of the LAN Ethernet ports of the switch.
Get Started |
23 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
•Make sure that the switch is receiving power and that its Power LED is lit.
•Close and reopen the browser.
5.Depending on whether you already own a free NETGEAR account, do one of the following:
•You own a NETGEAR account. Do the following:
a.Click the Login button.
The NETGEAR Account Login page displays.
b.Enter your registered email address and password and click the LOG IN button.
•You do not own a NETGEAR account. Do the following:
a.Click the Create button.
The Create NETGEAR Account page displays.
b.Set up a new account.
When you are done, the The NETGEAR Business page displays again.
c.Click the Login button.
The NETGEAR Account Login page displays.
d.Enter your registered email address and password and click the LOG IN button
The System Information page of the switch displays. You can now change the settings of the switch.
Note: After you successfully log in to your NETGEAR account, the switch is automatically registered with NETGEAR. If you use the NETGEAR Insight app to discover the switch in your network (see Use the NETGEAR Insight mobile app to discover and |register the switch on page 19), the switch is also automatically registered with NETGEAR.
Get Started |
24 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Navigation tabs, configuration menus, and page menu
The following figure shows the Switch Information page.
Navigation tabs |
Configuration menus |
Logout button |
|
||
|
|
Buttons |
Help page |
|
Page menu
Configuration status and options
Figure 1. Switch navigation tabs, configuration menus, and page menu
The navigation tabs along the top of the local browser interface give you quick access to the various switch functions. The tabs are always available and remain constant, regardless of which feature you configure.
When you select a tab, the features for that tab appear as menus directly under the tabs. The configuration menus in the blue bar change according to the navigation tab that is selected.
The configuration pages for each feature are available as submenu links in the page menu on the left side of the page. Some items in the menu expand to reveal multiple submenu links, as the following figure shows.
Get Started |
25 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Link
Submenu
links
Figure 2. Switch page menu link and submenu links
Configuration and status options
The area directly under the configuration menus and to the right of the links displays the configuration information or status for the page you select. On pages that contain configuration options, you might be able to enter information into fields, select options from menus, select check boxes, and select radio buttons.
Each page contains access to the HTML-based help that explains the fields and configuration options for the page.
Buttons in the local browser interface
Each page also contains command buttons. The following table shows the command buttons that are used throughout the pages in the local browser interface:
Table 1. Command buttons in the local browser interface
Button |
Function |
Add |
Clicking the Add button adds the new item configured in the heading row of a table. |
|
|
Apply |
Clicking the Apply button to save your settings. Configuration changes take effect |
|
immediately. |
Cancel |
Clicking the Cancel button cancels the configuration on the page and resets the data on |
|
the page to the previous values of the switch. |
|
|
Delete |
Clicking the Delete button removes the selected item. |
|
|
Update |
Clicking the Update button refreshes the page with the latest information from the device. |
|
|
Logout |
Clicking the Logout button ends the session. |
|
|
Get Started |
26 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
User-defined fields
User-defined fields can contain 1 to 159 characters, unless otherwise noted on the configuration web page. All characters can be used except for the ones stated in the following table (unless specifically noted in a procedure for a feature).
Table 2. Invalid characters for user-defined fields
Invalid Characters for user-defined fields
\ |
< |
/ |
> |
|
|
* |
| |
|
|
? |
|
|
|
Context-sensitive help
When you log in to the switch, every page contains a link to the online help (
) that contains information to assist in configuring and managing the switch. The online help pages are context sensitive. For example, if the IP Configuration page is open, the help topic for that page displays if you click the link to the online help.
Change the language of the local browser interface
By default, the language is set to Auto. You can set the language to a specific one.
To change the language of the local browser interface:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or change the switch IP address on page 15.
The NETGEAR Business page displays. You are prompted to sign in with your NETGEAR account.
Get Started |
27 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Note: If the switch is not connected to the Internet or off-network, you are prompted to sign in with the local password. (The default local password is password.)
4.Click the Login button.
The NETGEAR Account Login page displays.
5.Enter your registered email address and password and click the LOG IN button. The System Information page displays.
6.At the top of the page, to the left of Welcome, select a language from the language menu. A confirmation pop-up window opens.
7.Click the OK button to confirm.
The switch restarts and you must log in again.
The language of the local browser interface is now set to the language that you selected.
Change the management mode of the switch
By default, the management mode on the switch is Directly Connect to Web Browser Interface (which is the same as the local browser interface). You can also change the management mode to NETGEAR Insight Mobile App and Insight Cloud Portal.
About changing the management mode
The following applies to changing the management mode:
•Changing to the NETGEAR Insight Mobile App and Insight Cloud Portal mode.
-The first time that you enable this mode, the switch is reset to its factory default settings so that you can create the switch configuration and network topology using the Insight app or the Insight Cloud portal.
-If you added the switch to a network on the Insight app or Insight cloud portal before, all Insight-manageable device settings are returned to the last configuration saved on the cloud server, including the switch password (that is, the password is reset to the Insight network password).
-If you use the Insight app or the Insight Cloud portal, you can temporarily change the management mode of the switch back to Directly Connect to Web Browser Interface. You can then access the local browser interface for settings that are not Insight-manageable, for complex tasks such as integrating with an existing network of devices that are not managed through Insight, and for debugging purposes. When
Get Started |
28 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
you are done, you can change the management mode back to NETGEAR Insight Mobile App and Insight Cloud Portal.
•Changing back to Directly Connect to Web Browser Interface mode.
-The NETGEAR Insight Mobile App and Insight Cloud Portal management mode is disabled and the current Insight-manageable device settings are saved to the cloud server.
-Any changes that you make using the Directly Connect to Web Browser Interface management mode are not saved to the cloud server.
Change the management mode to NETGEAR Insight Mobile App and Insight Cloud Portal
To change the management mode of the switch to NETGEAR Insight Mobile App and Insight Cloud Portal:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or change the switch IP address on page 15.
The NETGEAR Business page displays. You are prompted to sign in with your NETGEAR account. If you do not know how to do this, see Access the local browser interface for the initial online log-in procedure on page 22.
Note: If the switch is not connected to the Internet or off-network, you are prompted to sign in with the local password. (The default local password is password.)
4.Click the Login button.
The NETGEAR Account Login page displays.
5.Enter your registered email address and password and click the LOG IN button. The System Information page displays.
6.Select the NETGEAR Insight Mobile App and Insight Cloud Portal radio button. A pop-up window opens.
7.Click the OK button.
8.Click the Apply button. Another pop-up window opens.
9.Click the OK button
Get Started |
29 |
User Manual |
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP Ports and) Cloud Management
Your settings are saved. The System Information page closes and the following occurs:
•The first time that you enable this mode, the switch is reset to its factory default settings.
•The switch connects to the cloud server.
•If you added the switch to a network on the Insight app before, all Insight-manageable device settings are returned to the last configuration saved on the cloud server, including the switch password (that is, the password is reset to the Insight network password).
•The NETGEAR Business page displays again.
You can now manage the switch using the Insight mobile app or Insight Cloud Portal.
Change the management mode back to Directly Connect to Web-browser Interface
To change the management mode of the switch back to Directly Connect to Web Browser Interface:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or change the switch IP address on page 15.
The NETGEAR Business page displays. You are prompted to sign in with your NETGEAR account. If you do not know how to do this, see Access the local browser interface for the initial online log-in procedure on page 22.
Note: If the switch is not connected to the Internet or off-network, you are prompted to sign in with the local password. (The default local password is password.)
4.Click the Login button.
The NETGEAR Account Login page displays.
5.Enter your registered email address and password and click the LOG IN button. The System Information page displays.
6.Select the Directly Connect to Web Browser Interface radio button. A pop-up window opens.
7.Click the OK button.
Get Started |
30 |
User Manual |
Loading...