DATA SHEET
PHOTOCOUPLER
PS9711
HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE
5-PIN SOP TOM PHOTOCOUPLER
-NEPOCTM Series-
DESCRIPTION
The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip.
FEATURES
•High common mode transient immunity (CMH, CML = ±10 kV/μs TYP.)
•Small package (5-pin SOP)
• High-speed response (tPHL = 30 ns, tPLH = 35 ns TYP.)
•Pulse width distortion (½tPHL – tPLH½ = 7 ns TYP.)
•Totem-pole output (No pull-up resistor required)
•Ordering number of taping product: PS9711-E3, E4: 900 pcs/reel,
PS9711-F3, F4 (Recommended): 3 500 pcs/reel
APPLICATIONS
•Computer and peripheral manufactures
•Measurement equipment
•PDP
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P13103EJ3V0DS00 (3rd edition) |
The mark • shows major revised points. |
|
|
Date Published February 2000 NS CP(K) |
© |
|
1997, 2000 |
Printed in Japan |
|
||
|
|
|
PS9711
PACKAGE DIMENSIONS (in millimeters)
2.1±0.2 0.1±0.1
4.0±0.5
|
TOP VIEW |
||
5 |
4 |
3 |
|
|
|
1. |
Anode |
|
|
2. |
Cathode |
|
|
3. GND |
|
|
|
4. |
VO |
|
|
5. |
VCC |
1 |
|
2 |
|
|
|
7.0±0.3 |
|
|
|
4.4 |
|
+0.10 –0.05 |
|
|
|
0.15 |
|
|
|
1.27 |
0.5±0.3 |
0.4–0+0..0510 |
0.25 M |
INTERNAL OUT PUT CIRCUIT
VCC (5)
Vo (4)
GND (3)
LED |
Output |
|
|
ON |
L |
|
|
OFF |
H |
|
|
2 |
Data Sheet P13103EJ3V0DS00 |
PS9711
ORDERING INFORMATION
Part Number |
Package |
Packing Style |
Application Part Number*1 |
|
|
|
|
PS9711 |
5-pin SOP |
Magazine case 100 pcs |
PS9711 |
|
|
|
|
PS9711-E3 |
|
Embossed Tape 900 pcs/reel |
|
|
|
|
|
PS9711-E4 |
|
|
|
|
|
|
|
PS9711-F3 |
|
Embossed Tape 3 500 pcs/reel |
|
|
|
|
|
PS9711-F4 |
|
|
|
|
|
|
|
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
|
Parameter |
Symbol |
Ratings |
Unit |
|
|
|
|
|
Diode |
Forward Current |
IF |
30 |
mA |
|
|
|
|
|
|
Reverse Voltage |
VR |
3.0 |
V |
|
|
|
|
|
Detector |
Supply Voltage |
VCC |
7 |
V |
|
|
|
|
|
|
Output Voltage |
VO |
7 |
V |
|
|
|
|
|
|
High Level Output Current *1 |
IOH |
−5 |
mA |
|
|
|
|
|
|
Low Level Output Current *1 |
IOL |
13 |
mA |
|
|
|
|
|
|
Power Dissipation *1 |
PC |
130 |
mW |
|
|
|
|
|
Isolation Voltage *2 |
BV |
2 500 |
Vr.m.s. |
|
|
|
|
|
|
Operating Ambient Temperature |
TA |
−40 to +85 |
°C |
|
|
|
|
|
|
Storage Temperature |
Tstg |
−55 to +125 |
°C |
|
|
|
|
|
|
*1 TA = −40 to +85 °C
*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output.
RECOMMENDED OPERATING CONDITIONS
Parameter |
Symbol |
MIN. |
TYP. |
MAX. |
Unit |
|
|
|
|
|
|
High Level Input Current |
IFH |
7.5 |
|
12.5 |
mA |
|
|
|
|
|
|
Low Level Input Current |
IFL |
0 |
|
250 |
μA |
|
|
|
|
|
|
Supply Voltage |
VCC |
4.5 |
5.0 |
5.5 |
V |
|
|
|
|
|
|
TTL (loads) |
N |
|
|
3 |
|
|
|
|
|
|
|
Data Sheet P13103EJ3V0DS00 |
3 |
PS9711
ELECTRICAL CHARACTERISTICS (TA = −40 to +85 °C, unless otherwise specified)
|
Parameter |
Symbol |
|
Conditions |
MIN. |
TYP. *1 |
MAX. |
Unit |
||
|
|
|
|
|
|
|
|
|
|
|
Diode |
Forward Voltage |
VF |
IF = 10 mA, TA = 25 °C |
1.4 |
1.65 |
1.9 |
V |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Reverse Current |
IR |
VR = 3 V, TA = 25 °C |
|
|
10 |
μA |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Terminal Capacitance |
Ct |
V = 0 V, f = 1 MHz, TA = 25 °C |
|
30 |
|
pF |
|
||
|
|
|
|
|
|
|
|
|
|
|
Detector |
High Level Output Current |
IOH |
VCC = VO = 5.5 V, IF = 250 μA |
|
1 |
200 |
μA |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
High Level Output Voltage |
VOH |
VCC = 4.5 V, IF = 250 μA, IOH = -2 mA |
2.4 |
3.0 |
|
V |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Low Level Output Voltage |
VOL |
VCC = 4.5 V, IF = 7 mA, IO = 8 mA |
|
0.38 |
0.6 |
V |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
High Level Supply Current |
ICCH |
VCC = 5.5 V, IF = 0 mA |
|
11 |
17 |
mA |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Low Level Supply Current |
ICCL |
VCC = 5.5 V, IF = 10 mA |
|
12 |
18 |
mA |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
High Level Output Short |
IOSH |
VCC = 5.5 V, VO = GND, IF = 0 mA, |
|
–26 |
|
mA |
|
||
|
Circuit Current |
|
10 ms or less |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low Level Output Short |
IOSL |
VCC = VO = 5.5 V, IF = 8 mA, |
|
34 |
|
mA |
|
||
|
Circuit Current |
|
10 ms or less |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coupled |
Threshold Input Current |
IFHL |
VCC = 5 V |
|
TA = 25 °C |
|
2.0 |
5 |
mA |
|
|
(H ® L) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threshold Input Current |
IFLH |
VCC = 5 V |
|
TA = 25 °C |
0.5 |
|
|
mA |
|
|
(L ® H) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.35 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Isolation Resistance |
RI-O |
VI-O = 1 kVDC, RH = 40 to 60 %, |
1011 |
|
|
W |
|
||
|
|
|
TA = 25 °C |
|
|
|
|
|
|
|
|
Isolation Capacitance |
CI-O |
V = 0 V, f = 1 MHz, TA = 25 °C |
|
0.4 |
|
pF |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Propagation Delay Time |
tPHL |
|
|
TA = 25 °C |
15 |
30 |
65 |
ns |
|
|
(H ® L)*2 |
|
|
|
|
|
|
|
|
|
|
|
VCC = 5 V, IF = 7.5 mA |
10 |
|
85 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
Propagation Delay Time |
tPLH |
|
|
TA = 25 °C |
15 |
35 |
65 |
ns |
|
|
(L ® H)*2 |
|
|
|
|
|
|
|
|
|
|
|
VCC = 5 V, IF = 7.5 mA |
10 |
|
85 |
|
|
|||
|
|
|
|
|
|
|
|
|
||
|
Pulse Width Distortion |
½tPHL-tPLH½ |
VCC = 5 V, IF = 7.5 mA |
|
7 |
35 |
ns |
|
||
|
(PWD) *2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
Common Mode |
CMH |
VCC = 5 V, TA = 25 °C, IF = 0 mA, |
1 |
10 |
|
μ |
|||
|
Transient Immunity at High |
VO (MIN.) = 2 V, VCM = 100 V |
|
kV/ |
s |
|||||
|
|
|
|
|
|
|
||||
|
Level Output*3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
Common Mode |
CML |
VCC = 5 V, TA = 25 °C, IF = 7.5 mA, |
1 |
10 |
|
μ |
|||
|
Transient Immunity at Low |
VO (MAX.) = 0.8 V, VCM = 100 V |
|
kV/ |
s |
|||||
|
|
|
|
|
|
|
||||
|
Level Output*3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
Data Sheet P13103EJ3V0DS00 |