NEC PX602UL-BK, PX602WL-BK, PX602UL-WH, PX602WL-WH User Manual

0 (0)

Projector

PX602UL-WH/PX602UL-BK/ PX602WL-WH/PX602WL-BK

User’s Manual

Model No.

NP-PX602UL-WH/NP-PX602UL-BK/NP-PX602WL-WH/NP-PX602WL-BK

Ver. 2 11/14

Apple, Mac, Mac OS, and MacBook are trademarks of Apple Inc. registered in the U.S. and other countries.

Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.

Adobe, Adobe PDF, Adobe Reader, and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association.

HDBaseT™ is a trademark of HDBaseT Alliance.

DLP and BrilliantColor are trademarks of Texas Instruments.

Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas.

Wi-Fi®, Wi-Fi Alliance®, and Wi-Fi Protected Access (WPA, WPA2)® are registered trademarks of the Wi-Fi Alliance.

Blu-ray is a trademark of Blu-ray Disc Association

CRESTRON and ROOMVIEW are registered trademarks of Crestron Electronics, Inc.in the United States and other countries.

Ethernet is either a registered trademark or trademark of Fuji Xerox Co., Ltd.

Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks of their respective holders.

TOPPERS Software Licenses

The product includes software licensed under TOPPERS License.

For more information on each software, see “readme.pdf” inside the “about TOPPERS” folder on the supplied CDROM.

NOTES

(1)The contents of this user’s manual may not be reprinted in part or whole without permission.

(2)The contents of this user’s manual are subject to change without notice.

(3)Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us.

(4)Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

Important Information

Safety Cautions

Precautions

Please read this manual carefully before using your NEC projector and keep the manual handy for future reference.

CAUTION

To turn off main power, be sure to remove the plug from power outlet.

The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET.

THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock.Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided.

The information should be read carefully to avoid problems.

WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

DO NOT USETHIS UNIT’S PLUGWITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALLTHE PRONGS CAN BE FULLY INSERTED.

DOC Compliance Notice (for Canada only)

This Class B digital apparatus complies with Canadian ICES-003.

Machine Noise Information Regulation - 3. GPSGV,

The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

Disposing of your used product

EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes projectors and their electrical accessories.When you dispose of such products, please follow the guidance of your local authority and/or ask the shop where you purchased the product.

After collecting the used products, they are reused and recycled in a proper way.This effort will help us reduce the wastes as well as the negative impact to the human health and the environment at the minimum level. The mark on the electrical and electronic products only applies to the current European Union Member States.

i

Important Information

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

RF Interference (for USA only)

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

For UK only: In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

Do not place the projector in the following conditions:

-on an unstable cart, stand, or table.

-near water, baths, or damp rooms.

-in direct sunlight, near heaters, or heat radiating appliances.

-in a dusty, smoky or steamy environment.

-on a sheet of paper or cloth, rugs or carpets.

If you wish to have the projector installed on the ceiling:

-Do not attempt to install the projector yourself.

-The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

-In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes.

-Please consult your dealer for more information.

ii

Important Information

WARNING

Do not place any objects, which are easily affected by heat, in front of the projector lens. Doing so could lead to the object melting from the heat that is emitted from the light output.

Do not use the projector with it leaning to the left and right.This may result in a malfunction, however, portrait installation* is possible. For portrait installation, install the projector with the intake vent at the bottom. Observe precautions for portrait installation.

*A customized stand and a safety cover (sold separately) need to be attached to the projector. (→ page 136)

Fire and Shock Precautions

Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow enough space between your projector and a wall. (→ page vii)

Do not try to touch the exhaust vent on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off.Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

Prevent foreign objects such as paper clips and bits of paper from falling into your projector.Do not attempt to retrieve any objects that might fall into your projector.Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

Do not place any objects on top of the projector.

Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply fits this requirement before attempting to use your projector.

Do not look into the lens while the projector is on. Serious damage to your eyes could result.

Do not look into the light source using optical instruments (such as magnifying glasses and mirrors).Visual impairment could result.

When turning on the projector, make sure no one within projection range is looking at the lens.

Keep any items (magnifying glass etc.) out of the light path of the projector.The light path being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause an unpredictable outcome such as a fire or injury to the eyes.

Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust vent.

iii

Important Information

Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire.

-Do not use any power cord other than the one supplied with the projector.

-Do not bend or tug the power cord excessively.

-Do not place the power cord under the projector, or any heavy object.

-Do not cover the power cord with other soft materials such as rugs.

-Do not heat the power cord.

-Do not handle the power plug with wet hands.

Turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel under the following conditions:

-When the power cord or plug is damaged or frayed.

-If liquid has been spilled into the projector, or if it has been exposed to rain or water.

-If the projector does not operate normally when you follow the instructions described in this user’s manual.

-If the projector has been dropped or the cabinet has been damaged.

-If the projector exhibits a distinct change in performance, indicating a need for service.

Disconnect the power cord and any other cables before carrying the projector.

Turn off the projector and unplug the power cord before cleaning the cabinet.

Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.

When using a LAN cable:

For safety, do not connect to the terminal for peripheral device wiring that might have excessive voltage.

CAUTION

Do not place your fingers inside the lens hood while performing a lens shift.Failure to do so could result in fingers being pinched between the cabinet and lens.

Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.

Do not send the projector in the soft case by parcel delivery service or cargo shipment.The projector inside the soft case could be damaged.

Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [MODE] → [HIGH].)

Do not bring the projector holding it by the lens hood.The projector may be dropped down and it may be cause of human injury.

If a safety cover (sold separately) is used, do not carry the projector by the cover.The safety cover can come off and the projector may be dropped, causing personal injury.

Do not unplug the power cord from the wall outlet or projector when the projector is powered on. Doing so can cause damage to the AC IN terminal of the projector and (or) the prong plug of the power cord.

To turn off the AC power supply when the projector is powered on, use the projector’s main power switch, a power strip equipped with a switch, or a breaker.

Caution on Handling the Optional Lens

When shipping the projector with the lens, remove the lens before shipping the projector. Always attach the dust cap to the lens whenever it is not mounted on the projector.The lens and the lens shift mechanism may encounter damage caused by improper handling during transportation.

Do not hold the lens part when carrying the projector.

Doing so could cause the focus ring to rotate, resulting in accidental dropping of the projector.

Remote Control Precautions

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not short, heat, or take apart batteries.

Do not throw batteries into fire.

If you will not be using the remote control for a long time, remove the batteries.

Ensure that you have the batteries’ polarity (+/−) aligned correctly.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

iv

Important Information

Light Module

1.A light module containing multiple laser diodes is equipped in the product as the light source.

2.These laser diodes are sealed in the light module. No maintenance or service is required for the performance of the light module.

3.End user is not allowed to replace the light module.

4.Contact qualified distributor for light module replacement and further information.

Laser Safety Caution

This product is classified as Class 2 of IEC60825-1 Second edition 2007-03.

Also complies with FDA performance standards 21 CFR 1040.10 and 1040.11 for laser products except for deviations pursuant to Laser Notice No.50, dated June 24, 2007.

Obey the laws and regulations of your country in relation to the installation and management of the device.

The laser module is equipped in this product.

Use of controls or adjustments of procedures other than those specified herein may result in hazardous radiation exposure.

DO NOT STARE INTO THE LENS WHILE IN USE.

• This caution labels are on the side face of the cabinet.

The explanatory label of the CLASS 2 LASER PRODUCTS is on the right side of the projector body.

About High Altitude mode

Set [FAN MODE] to [HIGH] when using the projector at altitudes approximately 2500 feet/760 meters or higher. Using the projector at altitudes approximately 2500 feet/760 meters or higher without setting to [HIGH] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.

Using the projector at altitudes approximately 2500 feet/760 meters or higher can shorten the life of optical components such as the light module.

About Copyright of original projected pictures:

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with the following functions may raise concern about the infringement of copyrights which are protected by copyright law.

[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.

Turkish RoHS information relevant for Turkish market

EEE Yönetmeliğine Uygundur.

This device is not intended for use in the direct field of view at visual display workplaces.To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.

v

Important Information

Health precautions to users viewing 3D images

Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your 3D eyeglasses or your 3D compatible content such as Blu-ray Discs, video games, computer’s video files and the like. To avoid any adverse symptoms, heed the following:

Do not use 3D eyeglasses for viewing any material other than 3D images.

Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images from too close a distance can strain your eyes.

Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer after every hour of viewing.

If you or any member of your family has a history of light-sensitive seizures, consult a doctor before viewing 3D images.

While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache, eyestrain, blurry vision, convulsions, and numbness, stop viewing them. If symptoms still persist, consult a doctor.

View 3D images from the front of the screen.Viewing from an angle may cause fatigue or eyestrain.

Power management function

In order to keep power consumption low, the following power management functions (1) and (2) have been set when shipped from the factory. Please display the on-screen menu and change the settings (1) and (2) according to the aim of using the projector.

1.STANDBY MODE (Factory preset: NORMAL)

When [NORMAL] is selected for [STANDBY MODE], the following terminals and functions will not work: HDMI OUT terminal, Ethernet/HDBaseT Port, USB Port, LAN functions, Mail Alert function

(page 114)

2.AUTO POWER OFF (Factory preset: 1 hour)

When [1:00] is selected for [AUTO POWER OFF], you can enable the projector to automatically turn off in 1 hour if there is no signal received by any input or if no operation is performed.

(page 115)

vi

Important Information

Clearance for Installing the Projector

Allow ample clearance between the projector and its surroundings as shown below.

The high temperature exhaust coming out of the device may be sucked into the device again.

Avoid installing the projector in a place where air movement from the HVAC is directed at the projector.

Heated air from the HVAC can be taken in by the projector's intake vent. If this happens, the temperature inside the projector will rise too high causing the over-temperature protector to automatically turn off the projectors power.

Example 1 – If there are walls on both sides of the projector.

30 cm/11.8" or greater

30 cm/11.8" or greater

Exhaust vent

 

 

 

 

 

 

 

 

 

Intake vent

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

The drawing shows the proper clearance required for the front, back and top of the projector.

Example 2 – In the case of portrait projection.

Intake vent

Safety cover

30 cm/11.8" or greater

NOTE:

The drawing shows the proper clearance required for the front, back and top of the projector.

See page 135 for an installation example on portrait projection.

vii

Table of Contents

 

Important Information............................................................................................

i

1. Introduction............................................................................................................

1

What’s in the Box?...........................................................................................................

1

Introduction to the Projector............................................................................................

2

Congratulations on Your Purchase of the Projector...................................................

2

General......................................................................................................................

2

Light source · Brightness...........................................................................................

2

Installation.................................................................................................................

2

Videos........................................................................................................................

3

Network.....................................................................................................................

3

Energy-saving............................................................................................................

3

About this user’s manual...........................................................................................

4

Part Names of the Projector............................................................................................

5

Front/Top....................................................................................................................

5

Rear...........................................................................................................................

6

Controls/Indicator Panel............................................................................................

7

Terminals Features....................................................................................................

8

Part Names of the Remote Control.................................................................................

9

Battery Installation...................................................................................................

10

Remote Control Precautions...................................................................................

10

Operating Range for Wireless Remote Control.......................................................

11

Using the Remote Control in Wired Operation........................................................

11

2. Projecting an Image (Basic Operation)................................................

12

Flow of Projecting an Image..........................................................................................

12

Connecting Your Computer/Connecting the Power Cord..............................................

13

Turning on the Projector................................................................................................

14

Note on Startup screen (Menu Language Select screen).......................................

15

Selecting a Source........................................................................................................

16

Selecting the computer or video source..................................................................

16

Adjusting the Picture Size and Position.........................................................................

18

Adjusting the vertical position of a projected image (Lens shift)..............................

19

Focus.......................................................................................................................

21

Zoom.......................................................................................................................

21

Adjusting the Tilt Foot..............................................................................................

22

Optimizing Computer Signal Automatically...................................................................

23

Adjusting the Image Using Auto Adjust...................................................................

23

Turning off the Projector................................................................................................

24

After Use.......................................................................................................................

25

3. Convenient Features.......................................................................................

26

Turn off the light of the projector (LENS SHUTTER).....................................................

26

Turning off the Image....................................................................................................

26

Turning Off the On-Screen Menu (On-Screen Mute).....................................................

26

Freezing a Picture.........................................................................................................

27

Magnifying a Picture......................................................................................................

28

viii

Table of Contents

Changing LIGHT MODE/Checking Energy-Saving Effect Using LIGHT MODE

 

[LIGHT MODE]........................................................................................................

29

Checking Energy-Saving Effect [CARBON METER]...............................................

31

Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]..................

32

Preventing the Unauthorized Use of the Projector [SECURITY]...................................

35

Projecting 3D videos.....................................................................................................

38

Procedure to watch 3D videos using this projector.................................................

38

When videos cannot be viewed in 3D.....................................................................

41

Controlling the Projector by Using an HTTP Browser...................................................

42

4. Multi-Screen Projection................................................................................

48

Things that can be done using multi-screen projection.................................................

48

Case 1. Using a single projector to project two types of videos [PIP/PICTURE

 

BY PICTURE]..........................................................................................................

48

Case 2. Using four projectors (resolution: WUXGA) to project videos with a

 

resolution of 2560 × 1600 pixels [TILING]...............................................................

49

Things to note when installing projectors................................................................

51

Displaying Two Pictures at the Same Time...................................................................

52

Projecting two screens............................................................................................

53

Switching the main display with the sub-display and vice versa..............................

54

Restrictions..............................................................................................................

55

Displaying a Picture Using [EDGE BLENDING]............................................................

56

Setting the overlap of projection screens................................................................

57

Black Level Adjustment...........................................................................................

60

5. Using On-Screen Menu.................................................................................

62

Using the Menus...........................................................................................................

62

Menu Elements.............................................................................................................

63

List of Menu Items.........................................................................................................

64

Menu Descriptions & Functions [INPUT].......................................................................

70

HDMI.......................................................................................................................

70

DisplayPort..............................................................................................................

70

BNC.........................................................................................................................

70

BNC(CV)..................................................................................................................

70

BNC(Y/C).................................................................................................................

70

COMPUTER............................................................................................................

70

HDBaseT.................................................................................................................

70

SLOT.......................................................................................................................

70

ENTRY LIST............................................................................................................

70

TEST PATTERN......................................................................................................

70

Menu Descriptions & Functions [ADJUST]...................................................................

74

[PICTURE]...............................................................................................................

74

[IMAGE OPTIONS]..................................................................................................

78

[VIDEO]...................................................................................................................

82

[3D SETTINGS].......................................................................................................

84

Menu Descriptions & Functions [DISPLAY]..................................................................

85

[PIP/PICTURE BY PICTURE].................................................................................

85

[GEOMETRIC CORRECTION]................................................................................

87

[EDGE BLENDING].................................................................................................

91

ix

Table of Contents

[MULTI SCREEN]....................................................................................................

92

Menu Descriptions & Functions [SETUP].....................................................................

94

[MENU]....................................................................................................................

94

[INSTALLATION]......................................................................................................

96

[CONTROL].............................................................................................................

99

[NETWORK SETTINGS].......................................................................................

107

[SOURCE OPTIONS]............................................................................................

112

[POWER OPTIONS]..............................................................................................

114

Returning to Factory Default [RESET]...................................................................

116

Menu Descriptions & Functions [INFO.]......................................................................

117

[USAGE TIME].......................................................................................................

117

[SOURCE(1)].........................................................................................................

117

[SOURCE(2)].........................................................................................................

118

[SOURCE(3)].........................................................................................................

118

[SOURCE(4)].........................................................................................................

118

[WIRED LAN].........................................................................................................

119

[VERSION(1)]........................................................................................................

119

[OTHERS]..............................................................................................................

119

[HDBaseT].............................................................................................................

120

6. Connecting to Other Equipment............................................................

121

Mounting a lens (sold separately)...............................................................................

121

Part Names of the Lens Mount..............................................................................

121

Mounting the lens..................................................................................................

122

Removing the lens.................................................................................................

124

Making Connections....................................................................................................

125

Analog RGB signal connection..............................................................................

125

Digital RGB signal connection...............................................................................

126

Connecting an External Monitor............................................................................

129

Connecting Your Blu-ray Player or Other AV Equipment.......................................

130

Connecting Component Input................................................................................

131

Connecting HDMI Input.........................................................................................

132

Connecting to a Wired LAN...................................................................................

133

Connecting to a HDBaseT transmission device (sold commercially)....................

134

Portrait projection (vertical orientation)..................................................................

135

Stacking projectors................................................................................................

138

7. Maintenance......................................................................................................

141

Cleaning the Lens.......................................................................................................

141

Cleaning the Cabinet...................................................................................................

141

8. User Supportware...........................................................................................

142

Operating Environment for Software Included on CD-ROM........................................

142

Names and Features of Bundled Software Programs...........................................

142

Download service..................................................................................................

142

Operating Environment..........................................................................................

142

Installing Software Program........................................................................................

143

Installation for Windows software..........................................................................

143

Operating the Projector Via the LAN (Virtual Remote Tool)........................................

146

Connect the projector to a LAN.............................................................................

147

x

Table of Contents

Controlling the Projector over a LAN (PC Control Utility Pro 4/Pro 5).........................

149

9. Appendix..............................................................................................................

153

Throw distance and screen size..................................................................................

153

Lens types and throw distance..............................................................................

153

Tables of screen sizes and dimensions.................................................................

155

Lens shifting range................................................................................................

156

Mounting the Optional Board (sold separately)...........................................................

157

Compatible Input Signal List.......................................................................................

159

Specifications..............................................................................................................

162

Cabinet Dimensions....................................................................................................

165

Pin assignments and signal names of main terminals................................................

166

Troubleshooting...........................................................................................................

168

Indicator Messages...............................................................................................

168

Common Problems & Solutions.............................................................................

170

If there is no picture, or the picture is not displayed correctly................................

172

PC Control Codes and Cable Connection...................................................................

173

Troubleshooting Check List.........................................................................................

174

xi

1. Introduction

What’s in the Box?

Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector.

Projector

Dust cap for lens

Remote control

AA alkaline batteries (x2)

* The projector is shipped without

(7N901041)

 

a lens. For the types of lens and

 

 

throw distances, see page 153.

 

 

Power cord

3 Stacking holders (79TG0291)

(US: 79TG0251)

When stacking projectors (double stacking), the tilt foot of the upper

(EU: 79TG0261)

projector will be placed onto these stacking holders. (page 139)

Important Infomation

NEC Projector CD-ROM

 

(7N8N5111)

User’s manual (PDF) and the

• Quick Setup Guide (7N8N5131)

utility software

Security Sticker

(7N952062)

 

(Use this sticker when security

 

 

password is set on.)

 

For North America only

Limited warranty

For customers in Europe:

You will find our current valid Guarantee Policy on our Web Site: www.nec-display-solutions.com

1

1. Introduction

Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today.The projector enables you to project precise images up to 500 inches across (measured diagonally) from your PC or Mac computer (desktop or notebook), VCR, Blu-ray player, or document camera.

You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen, and the projector can be permanently mounted on a ceiling*1.The remote control can be used wirelessly.

*1 Do not attempt to mount the projector on a ceiling yourself.

The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information.

General

Single-chip DLP projector with high resolution and high brightness

Model name

DMD panel

Resolution

Aspect ratio

 

 

 

 

PX602UL-WH/PX602UL-BK

0.67 type

1,920 × 1,200 pixels

16:10

 

 

 

 

PX602WL-WH/PX602WL-BK

0.65 type

1,280 × 800 pixels

16:10

 

 

 

 

Light source · Brightness

A long-life laser diode is equipped in the light module

The product can be operated at low cost because the laser light source can be used for a long time without requiring replacement or maintenance.

Brightness can be adjusted within a wide range

Unlike with ordinary light sources, the brightness can be adjusted from 20 to 100% in 1% increments.

[CONSTANT BRIGHTNESS] mode

Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, sensors inside the projector detect and automatically adjust the output, thereby maintaining constant brightness throughout the life of the light module.

However, if brightness output is set at the maximum, brightness will decrease with use.

Installation

Wide range of optional lenses selectable according to the place of installation

This projector supports 4 types, however PX602UL-WH and PX602UL-BK support 3 types of optional lenses, providing a selection of lenses adapted to a variety of places of installation and projection methods.

In addition, the lenses can be mounted and removed in one touch.

Note that no lens is mounted upon shipment from the factory. Please purchase optional lenses separately.

Tilt-free, portrait projection

This projector can be set to any angle within a vertical 360° range. It can also rotate the picture 90° into portrait orientation.

This projector cannot be installed with right or left slant besides the portrait projection.

Double stackable for high light output projection

By stacking 2 projectors, increased brightness on a large screen is possible.

Power lens control for quick and easy adjustment

By using buttons on the projector or the remote control, zoom, focus, and position (lens shift) can be adjusted.

2

1. Introduction

Videos

Wide range of input/output terminals (HDMI,DisplayPort,BNC,HDBaseT,etc.) and built-in monaural speaker

The projector is equipped with a variety of input/output terminals: HDMI, DisplayPort, BNC (5-core), computer (analog), HDBaseT, etc.

The projector’s HDMI input/output terminals and DisplayPort input terminal support HDCP.

HDBaseT, promoted and advanced by the HDBaseT Alliance, is a consumer electronic (CE) and commercial connectivity technology.

Slot for optional board

This projector has a slot for optional boards (sold separately).

Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)

Two images can be projected simultaneously with a single projector.

There are two types of layouts for the two images: “picture-in-picture” (PIP) in which a sub-picture is displayed on the main picture, and “picture-by-picture” (PICTURE BY PICTURE) in which the main and sub pictures are displayed next to each other.

Multi-screen projection using multiple projectors

This projector is equipped with multiple HDMI input & output terminals that can connect multiple projectors in a daisy chain. A high quality picture is achieved by dividing and projecting high resolution videos among the various projectors.

Furthermore, the boundaries of the screens are smoothed using an edge blending function.

Supports HDMI 3D format

This projector can be used to watch videos in 3D using commercially-available active shutter-type 3D eyewear and 3D emitters that support Xpand 3D.

Network

Convenient utility software (User Supportware) provided as standard

The three utility software stored in the enclosed NEC Projector CD-ROM (Virtual Remote Tool, PC Control Utility Pro 4 (for Windows ) and PC Control Utility Pro 5 (for Mac OS )) can be used.

CRESTRON ROOMVIEW compatible

This projector supports CRESTRON ROOMVIEW,allowing multiple devices connected to the network to be managed from a computer or controller.

Energy-saving

Energy-saving design with a standby power consumption of 0.5 watts

When the on-screen menu’s standby mode is set to “NORMAL”, the power consumption in the standby mode is 0.5 watts.

“LIGHT MODE” for low power consumption and “Carbon Meter” display

The projector is equipped with an “LIGHT MODE” for reducing power consumption during use. Furthermore, the

power-saving effect when the LIGHT MODE is set is converted into the amount of reductions of CO2 emissions and this is indicated on the confirmation message displayed when the power is turned off and at “Information” on the on-screen menu (CARBON METER).

3

1. Introduction

About this user’s manual

The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual.This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it.

4

1. Introduction

Part Names of the Projector

Front/Top

The lens is sold separately.The description below is for when the NP35ZL lens is mounted.

Remote Sensor

(page 11)

Exhaust vent

Heated air is exhausted from here.

Controls

(page 7)

Adjustable Tilt Foot

(page 22)

Indicator Panel (page 7)

Adjustable Tilt Foot

(page 22)

Lens Hood

Protects the lens.

Lens

Remote Sensor (located on the front and the rear)

(page 11)

5

1. Introduction

Rear

Safety cover fixing hole

(7 positions) The fixing holes for installing the

safety cover (sold separately) that is used for portrait installation.

Intake vent

Takes in outside air to cool the unit. There are air intake and ventilation holes on the bottom.

(page vii, 141)

Security Bar Attach an anti-theft device.

The security bar accepts security wires or chains up to 0.18 inch/4.6 mm in diameter.

Adjustable Tilt Foot

(page 22)

Stacking holder fixing position (3 positions)

For stacking up the projectors, fasten up the stacking holders supplied with this projector.

Remote Sensor (located on the front and the rear)

(page 11)

Terminals

(page 8)

AC IN terminal

Connect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (page 13)

Main power switch

While AC power is being supplied, set the main power switch to ON position (|), then your projector will enter a standby state.

Built-in Security Slot ( )*

* This security slot supports the MicroSaver ® Security System.

6

1. Introduction

Controls/Indicator Panel

2

3

4

5

8

 

1

6

7

9

12

11

10

13

14

 

 

 

15

16 17

1.

 

(POWER) Button

13. SHUTTER Button

 

 

 

(→ page 14, 24)

(→ page 26)

 

2.

POWER Indicator

14. LIGHT Button

 

 

(→ page 14, 15, 24, 168)

(→ page 29)

 

3.

STATUS Indicator

15. LENS SHIFT/HOME POSITION Button

 

(→ page 168)

(→ page 19, 26, 124, 156)

4.

LIGHT Indicator

16. FOCUS +/− Button

 

(→ page 29, 169)

(→ page 21)

 

5.

TEMP. Indicator

17. ZOOM +/− Button

 

(→ page 169)

(→ page 21)

 

6.SOURCE Button

(→ page 16)

7.AUTO ADJ. Button

(→ page 23)

8.3D REFORM Button

(→ page 32)

9.MENU Button

(→ page 62)

10.▲▼ Buttons

(→ page 62)

11.ENTER Button

(→ page 62)

12.EXIT Button

(→ page 62)

7

1. Introduction

Terminals Features

9

 

8

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12 11 13

1.COMPUTER 1 IN/ Component InputTerminal (Mini D-Sub 15 Pin)

(→ page 13, 125, 131, 166)

2.DisplayPort INTerminal (DisplayPort 20 Pin)

(→ page 126, 166)

3.HDMI INTerminal (Type A)

(→ page 126, 128, 132, 166)

4.BNC Input [R/Cr/CV, G/Y/Y, B/Cb/C, H,V]Terminals (BNC × 5)

(→ page 125, 130)

5.BNC (Y/C) InputTerminal (BNC × 2)

(→ page 130)

6.BNC (CV) InputTerminal (BNC × 1)

(→ page 130)

7.USB Port (Type A)

(→ page 167)

(For future expansion.This port allows for power supply.)

8.HDMI OUTTerminal (Type A)

(→ page 129)

9.Ethernet/HDBaseT Port (RJ-45)

(→ page 133, 134, 167)

10.3D SYNCTerminal (Mini DIN 4 Pin)

(→ page 40)

11.PC CONTROL Port (D-Sub 9 Pin)

(→ page 167, 173)

Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 173.

 

 

2

 

1

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

10 6 5

12.REMOTETerminal (Stereo Mini)

Use this jack for wired remote control of the projector using a commercially available remote cable with 3.5 stereo mini-plug (without resistance).

Connect the projector and the supplied remote control using a commercially available wired remote control cable.

(→ page 11)

NOTE:

When a remote control cable is connected to the REMOTE terminal, infrared remote control operations cannot be performed.

Power cannot be supplied from the REMOTE terminal to the remote control.

When [HDBaseT] is selected in the [REMOTE SENSOR] and the projector is connected to a commercially-available transmission device that supports HDBaseT, remote control operations in infra-red cannot be carried out if transmission of remote control signals has been set up in the transmission device. However, remote control using infrared rays can be carried out when the power supply of the transmission device is switched off.

13.SLOT

(→ page 157)

8

1. Introduction

Part Names of the Remote Control

1

 

1.

Infrared Transmitter

21. AUTO ADJ. Button

 

 

 

(→ page 11)

(→ page 23)

4

 

2.

Remote Jack

22, 23, 24. COMPUTER 1/2/3 But-

3

5

 

Connect a commercially available

ton

 

 

remote cable here for wired opera-

(→ page 16)

6

8

 

tion. (→ page 11)

25. VIDEO Button

9

3.

POWER ON Button

(→ page 16)

7

 

(→ page 14)

26. S-VIDEO Button

 

 

10

11

4.

POWER OFF Button

(→ page 16)

12

 

 

(→ page 24)

27. HDMI Button

13

5.

INFO/L-CALIB. Button

(→ page 16)

 

 

Display the [SOURCE(1)] screen

28. DisplayPort Button

14

15

 

of the on-screen menu.

(→ page 16)

 

(→ page 117)

29. VIEWER Button

16

17

 

6.

VOL./FOCUS +/− Buttons

(The VIEWER button will not work

20

18

 

(→ page 21)

 

on this series of projectors.)

21

 

19

7.

D-ZOOM/ZOOM +/− Buttons

30. NETWORK Button

23

24

 

(→ page 28)

 

(→ page 16)

22

26

 

8.

TEST Button

25

27

31. SLOT Button

28

30

 

(→ page 70)

(→ page 158)

29

9.

ECO/L-SHIFT Button

32. ID SET Button

32

 

 

(→ page 20, 29)

31

 

(→ page 105)

33

 

10. MENU Button

34

36

33. Numeric (0 to 9/CLEAR) But-

 

35

 

(→ page 62)

tons

 

11. EXIT Button

2

(→ page 62)

12. ENTER Button

(→ page 62)

13. ▲▼ Button

(→ page 62)

14. ON-SCREEN Button

(→ page 26)

15. SHUTTER Button

(→ page 26)

16. AV-MUTE Button

(→ page 26)

17. PICTURE Button

(→ page 74, 76)

18. SOURCE Button

(→ page 16)

19. 3D REFORM Button

(→ page 32)

20. PIP/FREEZE Button

(→ page 27, 53)

(→ page 105)

(The AUX button will not work on this series of projectors.)

34.CTL Button

This button is used in conjunction with other buttons, similar to a CTRL key on a computer.

35.LIGHT Button

This button is used to turn on the backlight for the remote control buttons.

The backlight will turn off if no button operation is made for 10 seconds.

36.HELP Button

(→ page 117)

9

1. Introduction

Battery Installation

1.Press the catch and remove the battery cover.

2.Install new ones (AA). Ensure that you have the batteries’ polarity (+/−) aligned correctly.

3.Slip the cover back over the batteries until it snaps into place.

NOTE: Do not mix different types of batteries or new and old batteries.

2

1

2

 

1

 

Remote Control Precautions

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not short, heat, or take apart batteries.

Do not throw batteries into fire.

If you will not be using the remote control for a long time, remove the batteries.

Ensure that you have the batteries’ polarity (+/−) aligned correctly.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

10

NEC PX602UL-BK, PX602WL-BK, PX602UL-WH, PX602WL-WH User Manual

1. Introduction

Operating Range for Wireless Remote Control

7m/276

inch

 

30°

15°

30°

7

m/276

inch

 

 

 

30°

15°

30°

Remote sensor on projector cabinet

Remote control

30°

 

30°

30°

 

 

30°

7 m/276 inch

7 m/276 inch

The infrared signal operates by line-of-sight up to a distance of above meters and within a 60-degree angle of the remote sensor on the projector cabinet.

The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

Using the Remote Control in Wired Operation

Connect one end of the remote cable to the REMOTE terminal and the other end to the remote jack on the remote control.

REMOTE

Remote Jack

NOTE:

When a remote cable is inserted into the REMOTE terminal, the remote control does not work for infrared wireless communication.

Power will not be supplied to the remote control by the projector via the REMOTE jack. Battery is needed when the remote control is used in wired operation.

11

2. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

Flow of Projecting an Image

Step 1

• Connecting your computer / Connecting the power cord (page 13)

Step 2

• Turning on the projector (page 14)

Step 3

• Selecting a source (page 16)

Step 4

Adjusting the picture size and position (page 18)

Correcting keystone distortion [CORNERSTONE] (page 32)

Step 5

Adjusting a picture

- Optimizing a computer signal automatically (page 23)

Step 6

• Making a presentation

Step 7

• Turning off the projector (page 24)

Step 8

• After use (page 25)

12

2. Projecting an Image (Basic Operation)

Connecting Your Computer/Connecting the Power Cord

1.Connect your computer to the projector.

This section will show you a basic connection to a computer. For information about other connections, see “(2) Making Connections” on page 125.

Connect the display output terminal (mini D-sub 15 pin) on the computer to the COMPUTER 1 IN terminal on the projector with a commercially-available computer cable (with ferrite core) and then turn the knobs of the terminals to secure them.

2.Connect the supplied power cord to the projector.

First connect the supplied power cord’s three-pin plug to the AC IN terminal of the projector, and then connect the other plug of the supplied power cord in the wall outlet.

Important Information:

When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to the off [O] position. Failure to do so may cause damage to the projector.

COMPUTER 1 IN

To wall outlet

Computer cable (with ferrite core)

(sold commercially) Make sure that the prongs are fully inserted into both the AC IN terminal and the wall outlet.

CAUTION:

Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

13

2. Projecting an Image (Basic Operation)

Turning on the Projector

NOTE:

The projector has two power switches: A main power switch and a POWER button (POWER ON and OFF on the remote control)

Turning on the projector:

1.Press the main power switch to the ON position (I).

The projector will go into standby mode.

2.Press the POWER button .

The projector will become ready to use.

•Turning off the projector:

1.Press the POWER button.

The confirmation message will be displayed.

2.Press the POWER button again.

The projector will go into standby mode.

3.Press the main power switch to the OFF position (O).

The projector will be turned off.

1.Press the main power switch to the ON position ( I ).

The POWER indicator lights up red.*

*This indicates that the STANDBY mode is in [NORMAL] setting.

(page 114, 168)

WARNING

The projector produces a strong light. When turning on the power, make sure no one within projection range is looking at the lens.

NOTE:

The [STANDBY MODE] setting will be disabled and the projector will go into the sleep mode when the network service is utilized or the projector receives HDBaseT signal. In the sleep mode, the fans in the projector rotate for the purpose of interior parts protection. Please refer to page 114 about the sleep mode.

2.Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.

The POWER indicator goes from a steady red light to a flashing blue light, and the picture is projected on the screen.

TIP:

When the message “PROJECTOR IS LOCKED! ENTER YOUR PASSWORD.” is displayed, it means that the [SECURITY] feature is turned on. (page 35)

After you turn on your projector, ensure that the computer or video source is turned on.

NOTE: The blue screen ([BLUE] background) is displayed when no signal is being input (by factory default menu settings).

Standby

Blinking

Power On

Steady red light

Blinking blue

Steady blue

 

light

light

(→ page 168)

14

2. Projecting an Image (Basic Operation)

Note on Startup screen (Menu Language Select screen)

When you first turn on the projector, you will get the Startup menu.This menu gives you the opportunity to select one of the 29 menu languages.

To select a menu language, follow these steps:

1. Use the , , or button to select one of the 29 languages from the menu.

2. Press the ENTER button to execute the selection.

After this has been done, you can proceed to the menu operation.

If you want, you can select the menu language later. (→ [LANGUAGE] on page 66 and 94)

NOTE:

If one of the following things happens, the projector will not turn on.

-If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool down.

-If the STATUS indicator lights orange with the power button pressed, it means that the [CONTROL PANEL LOCK] is turned on. Cancel the lock by turning it off. (page 104)

While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the power button. (While the POWER indicator is blinking blue in long cycles, the OFF TIMER is functioned and the power can be turned off.)

15

2. Projecting an Image (Basic Operation)

Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.

Detecting the Signal Automatically

Press the SOURCE button for 1 second or longer. The projector will search for the available input source and display it.The input source will change as follows:

HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMUPTER

→ HDBaseT → SLOT → …

• Press it briefly to display the [INPUT] screen.

Press the ▼/▲ buttons to match the target input terminal and then press the ENTER button to switch the input.To delete the menu display in the [INPUT] screen, press the MENU or EXIT button.

TIP: If no input signal is present, the input will be skipped.

Using the Remote Control

Press any one of the HDMI, DisplayPort, COMPUTER 2, VIDEO, S- VIDEO, COMPUTER 1, NETWORK, or SLOT buttons.

• COMPUTER 2 button selects the BNC input terminal.

• VIDEO button selects the BNC (CV) input terminal (CompositeVideo).

• S-VIDEO button selects the BNC (Y/C) input terminal (S-Video).

16

2. Projecting an Image (Basic Operation)

Selecting Default Source

You can set a source as the default source so that it will be displayed each time the projector is turned on.

1.Press the MENU button.

The menu will be displayed.

2.Press the button to select [SETUP] and press the button or the ENTER button to select [BASIC].

3.Press the button to select [SOURCE OPTIONS].

4.Press the button four times to select [DEFAULT INPUT SELECT] and press the ENTER button.

The [DEFAULT INPUT SELECT] screen will be displayed. (page 112)

5.Select a source as the default source, and press the ENTER button.

6.Press the EXIT button three times to close the menu.

7.Restart the projector.

The source you selected in step 5 will be projected.

NOTE: Even when [AUTO] is turned on, the [HDBaseT] will not be automatically selected. To set your network as the default source, select [HDBaseT].

TIP:

When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER 1 IN input will power on the projector and simultaneously project the computer’s image.

([AUTO POWER ON SELECT] page 115)

On the Windows 7 keyboard, a combination of the Windows and P keys allows you to set up external display easily and quickly.

17

Loading...
+ 159 hidden pages